AptoGrip Aluminum 25mm
Ink MachinesSpecifications
- Brand
- Ink Machines
- Weight
- 70 g
- Material
- Aluminum, stainless steel
- Dimensions
- 25 mm
- Autoclavable
- 134°C
- Adjustment
- 4 mm
- Tube
- OD 8mm ID 6.5mm
- Warranty
- 1 year
Ghiduri utile:Grip-uri și tuburi pentru tatuaj — ghidDiametrul gripurilor de cartuș: 25mm, 30mm sau 32mm — ce înseamnă și cu ce mașini e compatibilDe ce se slăbește cartușul în grip după câteva luni de folosire și cum repari mecanismul de blocare
Presentation video
Guide & full description
Complete guide: AptoGrip Aluminum 25mm
This is a reusable grip with an adjustable tube, made from anodized aluminum and 7075-grade stainless steel (aircraft-grade), designed for tattoo artists who want an ergonomic grip that's easy to sterilize between clients. The 25 mm diameter offers a thicker grip, especially appreciated during long shading and color packing sessions, where pressure needs to be evenly distributed in the palm. It fits most machines with a standard 8 mm backstem and allows precise needle protrusion adjustment even while working. Being reusable and autoclavable, it replaces disposable grips in the long term.
How to use
- Mount the grip onto the machine via the standard 8 mm backstem. Thanks to its construction, the grip does not pivot relative to the machine, so the position stays fixed during work.
- Insert the standard 8 mm tip — the manufacturer recommends disposable plastic tips — together with the needle/cartridge suitable for your setup.
- Adjust the needle protrusion by turning the adjustment nut on the grip; it remains accessible while working, with a 4 mm adjustment range.
- Use the reference marks on the tube to achieve exactly the same tip length with every setup, especially if you change needles during the session.
- Apply protective barriers (film/clip cord sleeve) according to the salon's hygiene protocol before starting.
- At the end, dispose of the disposable tip and needle/cartridge in the appropriate waste container.
- Clean the grip mechanically, then sterilize it in a steam autoclave (cycle B) at 134°C; keep the included hex key for tightening the tip when needed.
Tips from us
- Write down or memorize the adjustment position using the reference marks on the tube, so you can quickly reproduce the same needle protrusion with each setup.
- Use 8 mm disposable plastic tips and do not reuse them — this is the most hygienic solution and is recommended by the manufacturer.
- The anodized surface provides good grip with nitrile or latex gloves; avoid oils and lubricants on the grip body, as they reduce traction.
- For techniques with constant pressure on large areas (shading, fill), the 25 mm diameter distributes pressure better in the palm than a thinner grip.
- Clean the grip immediately after use, before ink and liquid residues dry, for more effective sterilization.
Frequently asked questions
What does the product include?▾
A 25 mm AptoGrip Aluminum grip and a hex key for tightening the tip. Disposable tips and needles/cartridges are sold separately.
Which machines is it compatible with?▾
It fits most tattoo machines that use a standard 8 mm backstem. The construction ensures the grip does not rotate relative to the machine, so the adjustment stays secure. If your machine uses a different connection type, check the specification before purchase.
How do I sterilize it properly?▾
First clean it mechanically, then sterilize it in a steam autoclave, cycle B, at 134°C. Important: DO NOT use hot air autoclaves, DO NOT clean with ultrasound, and avoid alkaline or strong acids — otherwise the grip will be damaged and you will lose the warranty.
What tips and needles can I use?▾
Standard 8 mm tips, and the manufacturer recommends disposable plastic tips. The tube (OD 8 mm / ID 6.5 mm) allows large needle configurations, up to 17 Mag / 0.35 according to the manufacturer's specification.
What's the difference compared to a thinner version (e.g., 22 mm)?▾
The grip diameter differs. The 25 mm offers a thicker grip, preferred by many artists for long shading and fill sessions, as it distributes pressure over a larger palm area. A thinner version offers a slimmer grip for fine control in lining and details. The choice depends on your hand size and predominant technique.
Why aluminum and not stainless steel?▾
Aluminum makes the grip lighter and more maneuverable during long sessions, and the anodized layer withstands repeated autoclaving without degrading. AptoGrip combines 7075-grade aluminum with stainless steel for durability, and unlike reusable silicone grips, it does not absorb pigment.
Product description
You might also like
Reviews
No reviews yet. Bought this product? Be the first to leave one.