Complete guide: Microneedling Dr Pen Ultima A1-C
Dr Pen Ultima A1-C is a corded electric microneedling device used for controlled skin puncturing procedures with needles mounted on an interchangeable cartridge. The needle length is adjustable via the ring on the device body, between 0 and 3.00 mm, the motor speed ranges from 8,000 to 12,000 rpm, and there are 5 electroporation levels, all controllable from the device button. It comes with two spare cartridges (12 needles each), individually packaged. It is intended for technicians and professionals who perform microneedling procedures and already have the necessary knowledge to safely work with a device that penetrates the skin.
How to use
- Before each session, verify that you are using a new, individually sealed needle cartridge — do not reuse cartridges between clients.
- Mount the needle cartridge onto the device head, ensuring it is properly secured and the needles slide freely.
- Adjust the needle length using the adjustment ring: turn clockwise to increase and counterclockwise to decrease, depending on the treatment area.
- Turn on the device by pressing and holding the On/Off button for 2 seconds.
- Adjust the motor speed (range 8,000-12,000 rpm) and the electroporation level (one of the 5 available) directly from the device controls, according to the procedure being performed.
- Work with controlled movements on the treated area, respecting the depth settings appropriate for the skin type and region.
- When finished, turn off the device using the button, remove the used cartridge, and dispose of it according to regulations for sharps waste.
- Store the device unplugged, away from direct sunlight.
Tips from us
- Choose the needle length according to the area and skin thickness — the device allows fine adjustment between 0 and 3 mm.
- Use a new individually sealed cartridge for each client; cartridges are single-use and must not be reused.
- Check the cartridge is securely attached before starting to avoid needle play during work.
- Keep the device turned off via the button between uses and store it away from direct sunlight, as recommended by the manufacturer.
- Do not set the speed or electroporation level to maximum by default — choose them according to the procedure and area being treated.
- Clean and disinfect the device body after each use, following standard hygiene practices for equipment that comes into contact with skin.
Warning: This is a device that penetrates the skin with needles, so hygiene is mandatory: work only with new, individually sealed cartridges, use gloves, and disinfect the client's skin before the procedure. Never reuse a needle cartridge on another client, and dispose of used cartridges as sharps waste according to applicable regulations. The device is intended for use by individuals trained in microneedling procedures — if you are a beginner, thoroughly inform yourself about the technique and contraindications before using it on clients.
Frequently asked questions
What exactly is a microneedling device and what is it used for?▾
It is a device with fine needles mounted on an interchangeable cartridge, which performs controlled micro-perforations in the skin. The Dr Pen Ultima A1-C adjusts both the speed (8,000-12,000 rpm) and the needle length (0-3 mm) and the electroporation level (5 levels), to adapt to different areas and procedures.
How do I adjust the needle length on the Dr Pen Ultima A1-C?▾
Using the adjustment ring on the device body: turn clockwise to increase the needle length and counterclockwise to decrease it. The adjustable length ranges from 0 to 3.00 mm.
Can the needle cartridges be reused on multiple clients?▾
No. The cartridges are single-use, individually packaged, and must be used once on a single client, then disposed of as sharps waste. The device comes with 2 spare cartridges (12 needles each) included, but for regular salon use you will need additional stock.
What speed and power supply does the device have?▾
The motor operates between 8,000 and 12,000 rpm, with 5 adjustable electroporation levels from the device controls. It is a corded model with a 110-220V power supply.
How do I choose the needle length for different areas of the face?▾
The manufacturer provides a guideline for adjustment by area: shorter lengths (around 0.25-0.5 mm) for sensitive areas such as the eye area or upper lip, and longer lengths (over 1 mm) for areas with thicker skin or for scars. The final choice must be made carefully, depending on each client's skin type and the intended procedure.
How should I store the device correctly when not in use?▾
Keep it unplugged and avoid storing it in direct sunlight or in places with high temperatures, as recommended by the manufacturer.
Product description
Dr Pen Ultima A1-CIt is a device for applying microneedling therapies. The machine has an On/Off button, which can be used to adjust the speed. Press and hold for 2 seconds to start the car. The length of the needle can be adjusted by turning the adjustment ring clockwise or counterclockwise. Used in: Hair Regeneration Improvement of surface scars and deep scars Aging of the skin Skin hardening Contraction of pores Improvement of wrinkles Specifications: Type: Needle Electroporation System Speed: 8000-12000rpm Electroporation steps: 5Voltage: 110-220VNeedle length: 0-3.00mm Total weight: 400gr Dermapen weight: 65gr Spares included: 2x cartridges of 12 needles Wired Characteristics: Adjustable control with needle penetration depths up to 3.0mm Direct access to assembly and disassembly Individual packaging Prevents backflow into the device Spare needles included (2 cartridges of 12 needles)Scar treatment The Derma Pen scar reduction procedure works by releasing old scar tissue, deep in the skin. Scar tissue is what creates the visible scars on the surface of the skin. The treatment will repair the skin naturally, working under the surface of the skin (in the dermis). This requires time for new collagen and elastin fibers to form, smoothing scars, generating new skin cells and improving blood circulation. The results can be seen within 6 weeks, and a 70-80% improvement of the scars. Treatment of Stretch Marks Stretch marks are caused by the stretching of the skin during rapid growth during puberty and pregnancy. About 80% of all pregnant women face stretch marks. This stretching of the skin results in tears, which eventually turn into scars. New stretch marks appear as irregular purple lines and gradually change color to white or silver. Stretch marks are permanent, and to the touch they are smoother than the surrounding skin. Glucocoricoid hormones are responsible for stretch marks. They prevent the transformation of fibroblasts into collagen and elastin fibers. Although stretch marks do not compromise the function of the body, in most cases, stretch marks can be an aesthetic mutilation and can often lead to depression. Until now, the healing of stretch marks has been very "difficult" and the improvement of creams and laser treatments limited. The Micro-Ace Derma Pen pencil stimulates cell regeneration and the dramatic proliferation of collagen and elastin fibers. Many dermatologists have started treating stretch marks since 2007. The results were amazing and you can expect a 70% improvement. Wrinkle treatment The first signs of aging are, in general, the formation of fine lines, especially around the eyes and upper lip. The layers of the epidermis become thinner and harder, and the previous transparency begins to fade. The dermis loses its elasticity through the degradation of collagen and elastin fibers. The cells of the dermal tissue begin to shrink. In addition, the skin faces a dramatic loss of hydration. All these factors participate in skin degradation. What can be done to stop this degradation? The answer is cellular regeneration! This can be achieved with Collagen Induction Therapy (TIC). TIC is a simple microneedling procedure with the Micro-Ace Derma Pen. It is absolutely effective and stimulates the creation of new collagen cells that stimulate the skin by remodeling the structure of the dermis and epidermis. In the case of medical dermatological rolls, depending on the skin condition of each individual, 1 to 3 procedures, separated by 6 to 8 weeks, are sufficient to restore the skin's surface. Against hair loss Because Derma Pen stimulates regeneration in the areas where it is applied, it can also stimulate hair growth (in places where hair loss has occurred). Stimulating blood circulation is proven to be a way to stop hair loss and hair regeneration, increasing the supply of raw materials to the hair follicles and thus encouraging growth. Improved blood circulation to the scalp can also help reduce DHT levels in the scalp. Adjustment reference: Forehead - thin skin 0.25-0.5mm, thick skin 0.5-0.75mm Between the eyebrows - thin skin 0.25-0.5mm, thick skin 0.5-1.0mm Nose - thin skin 0.25mm, thick skin 0.5mm Eye area - thin skin 0.25mm, thick skin 0.25-0.5mm Cheekbones - thin skin 0.5mm, thick skin 0.5-1.0mm Barbie - thin skin 0.5-1.0mm, thick skin 1.0-2.0mm Upper lip - thin skin 0.25mm, thick skin 0.25-0.75mm Facial scars - thin skin 1.0-1.25mm, thick skin 1.5-2.0mm Surgical scars and burns - thin skin or thick skin 2.0-3.0mm It is recommended that the car be powered off when not in use, and not stored in direct sunlight or at high temperatures and humidity. In the box you will receive: Dr. Pen's car2 microneedling needlesbattery User manual1 year warranty
The Dr. Pen Ultima A1-C microneedling machine is a compact electric pen-style device designed for professional and semi-professional microneedling treatments. The A1-C model (wired variant, cable connection) provides continuous power without battery autonomy limitations, ideal for long consecutive sessions in the office. The device works through rapid oscillation of a piston that moves the needle cartridge at adjustable speeds, creating controlled micro-perforations in the skin to stimulate collagen production (Collagen Induction Therapy). Penetration depth is adjustable between 0.25mm and 2.5mm by rotating the ring on the device body, allowing treatment customization for any zone and indication. The electric motor offers multiple speed levels for adapting to treated zone sensitivity and skin type. The ergonomic pen-style design allows excellent maneuverability, including on hard-to-reach areas such as the periocular zone, nasolabial fold, and scalp. Compatible with all standard Dr. Pen microneedling cartridges: F5, 9 pin, 12 pin, 24 pin, 36 pin, 42 pin, and nano pin. Dr. Pen Ultima A1-C is the ideal entry point into professional microneedling — it delivers reliable performance at an accessible price, making it the preferred choice for offices beginning to integrate microneedling into their service portfolio.
Frequently Asked Questions
