Trebuie diluate sau clătite după utilizare?

Nu. Șervețelele sunt pre-impregnate și gata de utilizare: se folosesc ca atare, nediluate, iar după ștergere nu este necesară clătirea. Lași filmul de lichid să acționeze și suprafața să se usuce. Produsul nu pătează și nu decolorează suprafețele.

Cât timp trebuie să acționeze ca să dezinfecteze efectiv?

Depinde de efectul urmărit, conform tabelului de eficiență al produsului: 5 minute pentru efect bactericid și virucid, 10 minute pentru efect levuricid și fungicid și 60 de minute pentru efect micobactericid, tuberculocid și sporicid. Regula practică: menține suprafața vizibil umedă (film continuu de lichid) pe toată durata timpului de contact.

Pot să șterg cu ele mașina de tatuat, clip cord-ul sau blatul de lucru?

Da, sunt destinate exact acestui tip de utilizare: suprafețe, instrumentar și echipamente externe — blaturi, mânere, aparatură. În studio le folosești la pregătirea și demontarea stației de lucru. Atenție însă: ștergerea nu ține locul barierelor de protecție (folii) în timpul ședinței și nici al sterilizării pentru instrumentarul reutilizabil care intră în contact cu pielea lezată.

Sunt eficiente și împotriva virusurilor?

Da. Eficiența virucidă este testată conform standardului EN 14476, iar spectrul acoperit în testele producătorului include atât virusuri anvelopate, cât și neanvelopate — printre care virusurile hepatitice B și C, HIV, virusuri gripale, adenovirusuri și norovirusuri. Pentru efectul virucid, timpul de contact indicat este de 5 minute.

Cât acoperă un pachet și cum îl aleg față de un dezinfectant lichid cu pulverizare?

Pachetul are 80 de bucăți, iar consumul orientativ este de 2 șervețele/m², deci un pachet acoperă orientativ până la 40 m² de suprafață ștearsă — mai puțin dacă suprafețele sunt foarte murdare sau texturate. Șervețelele sunt alegerea practică atunci când vrei dozaj controlat, fără dispozitive suplimentare și fără risc de a turna prea mult sau prea puțin; un lichid cu pulverizare rămâne util pentru suprafețe mari, unde reîncarci flaconul.

Cum păstrez șervețelele ca să nu se usuce între utilizări?

Închide capacul sau folia autoadezivă imediat după fiecare extragere — ambalajul este impermeabil și rezistent tocmai ca să sigileze bine între utilizări și să mențină șervețelele impregnate. Scoate un singur șervețel o dată și nu lăsa pachetul deschis pe stație în timpul lucrului.

Klintensiv Disinfectant Surface Wipes 80 pcs

Cod produs: 4724498

21,70 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Quick:

Specifications

Packaging: 80 buc
Quantity: 80 pieces
Dimensions: 190×160 mm
Material: Polyester + viscose
Format: Pack
Use: Surface disinfection

Ghiduri utile:Dezinfectanți pentru studio: mâini, instrumentar, suprafețe — ghidul categoriei Timp de contact și spectru la dezinfectanți: cum citești eticheta corect Igienă și sterilizare în studioul de tatuaj — bazele

Guide & full description

Complete guide: Klintensiv Disinfectant Surface Wipes 80 pcs

Pre-impregnated wet wipes, ready to use, for cleaning and disinfection of surfaces, instruments and medical devices — applied by simple wiping, without dilution and without rinsing. The pack contains 80 pieces, and the controlled dosage (one uniformly impregnated wipe) reduces the risk of cross-contamination compared to solutions poured onto cloths. In the tattoo studio, they are useful for the work station, countertops, chair arms, and frequently touched points, and the virucidal efficiency is tested according to EN 14476.

How to use

Open the pack and extract a single impregnated wipe, then immediately reseal the cap or self-adhesive foil so the remaining wipes do not dry out.
Wipe the targeted surface so as to form a continuous and uniform film of liquid — the product is used as is, undiluted, on clean or dirty surfaces.
Dose correctly: the indicative consumption is 2 wipes/m², depending on the degree of dirtiness and the surface texture.
Respect the contact time according to the desired effect: 5 minutes for bactericidal and virucidal effect, 10 minutes for yeasticidal and fungicidal effect, 60 minutes for mycobactericidal, tuberculocidal and sporicidal effect.
For instruments and external equipment (e.g., apparatus that does not come into contact with injured skin), completely cover the surface with a film of liquid and maintain the contact time of 5–60 minutes, depending on the disinfection level targeted.
Do not rinse after application — let the surface dry; the product does not stain or discolor surfaces.
Discard the wipe after use: a used wipe should not be reused on another area, so as not to transfer dirt from one place to another.

Tips from us

In a tattoo studio, focus on frequently touched points: countertops, handles, work tables, chair arms and external equipment — exactly the areas recommended by the manufacturer for this type of product.
Wipe first in clean areas and only then in visibly dirty ones, and on heavily loaded surfaces increase the number of wipes — the consumption of 2 pcs/m² is indicative.
If you want coverage also for spores (the most demanding level in the efficiency table), plan disinfection at the end of the day: the required contact time is 60 minutes.
Reclose the packaging immediately after each extraction — good sealing between uses is what keeps the wipes impregnated throughout the pack's lifespan.
Wear disposable gloves during disinfection, as with any biocidal product — you protect your skin and maintain the hygiene chain of the station.
Wiping disinfection does not replace protective barriers (foils for clip cord, machine, countertop): use them together — barrier during work, wiping when preparing and dismantling the station.

Warning: Biocidal product — efficacy tests approved by the National Commission for Biocidal Products no. 2394BIO/02/12.30. Do not apply directly on surfaces that come into contact with food. The wipes disinfect surfaces, equipment and instruments by wiping, but do NOT replace sterilization (autoclaving) of reusable instruments that come into contact with injured skin — reusable grips and metal tips are cleaned, disinfected and then sterilized. Do not dilute the product, do not rinse after application and keep the packaging closed, out of reach of children.

Frequently asked questions

Do they need to be diluted or rinsed after use?▾

No. The wipes are pre-impregnated and ready to use: they are used as such, undiluted, and after wiping rinsing is not necessary. Let the liquid film act and the surface dry. The product does not stain or discolor surfaces.

How long should they act to effectively disinfect?▾

It depends on the desired effect, according to the product's efficiency table: 5 minutes for bactericidal and virucidal effect, 10 minutes for yeasticidal and fungicidal effect, and 60 minutes for mycobactericidal, tuberculocidal and sporicidal effect. Practical rule: keep the surface visibly wet (continuous liquid film) for the entire contact time.

Can I wipe the tattoo machine, clip cord, or work surface with them?▾

Yes, they are intended exactly for this type of use: surfaces, instruments and external equipment — countertops, handles, apparatus. In the studio you use them for preparing and dismantling the work station. However, note: wiping does not replace protective barriers (foils) during the session nor sterilization for reusable instruments that come into contact with injured skin.

Are they effective against viruses as well?▾

Yes. The virucidal efficiency is tested according to standard EN 14476, and the spectrum covered in the manufacturer's tests includes both enveloped and non-enveloped viruses — including hepatitis B and C viruses, HIV, influenza viruses, adenoviruses and noroviruses. For the virucidal effect, the indicated contact time is 5 minutes.

How much area does one pack cover and how do I choose it versus a liquid disinfectant with spray?▾

The pack has 80 pieces, and the indicative consumption is 2 wipes/m², so one pack covers indicatively up to 40 m² of wiped surface — less if surfaces are very dirty or textured. Wipes are the practical choice when you want controlled dosage, without additional devices and without the risk of pouring too much or too little; a liquid spray remains useful for large surfaces, where you refill the bottle.

How do I keep the wipes from drying out between uses?▾

Close the cap or self-adhesive foil immediately after each extraction — the packaging is waterproof and resistant precisely to seal well between uses and keep the wipes impregnated. Take out only one wipe at a time and do not leave the pack open on the station during work.

Product description

Klintensiv pre-impregnated wet disinfectant wipes for surfaces, ready to use, designed for cleaning and disinfecting surfaces, instruments, and medical devices. Wipe-on application, no additional equipment required, no rinsing; reduced risk of cross-contamination thanks to controlled dosing. Pack of 80 wipes. Key Benefits Easy to use, high disinfection efficiency (including in soiled conditions). Ready to use; no dilution required, no rinsing required. Does not stain, does not discolor; the wipe material combined with low-foaming surfactants ensures effective cleaning and degreasing. Waterproof and durable packaging with lid or self-adhesive seal (good closure between uses). Virucidal efficacy according to EN 14476 for clinically relevant strains. Recommended For Hospitals, clinics, laboratories, polyclinics, medical offices, ambulances, office and canteen areas. Risk zones and frequently touched points: triage/waiting areas, locker rooms, examination tables, ambulance surfaces. Caution: avoid direct application on surfaces in contact with food. Physico-Chemical Characteristics Impregnation solution: colorless liquid, fragranced; pH 10.8 ± 0.5; soluble in water. Wipe dimensions: 190×160 mm / 250×150 mm / 200×200 mm. Material: polyester + viscose. Quantity: 80 wipes / pack. Instructions for Use Use as is (undiluted), on clean or soiled surfaces. Apply by wiping with the impregnated wipes, ensuring a uniform liquid film on the surface. Step-by-Step Application Open the pack and pull out one impregnated wipe. Wipe the target surface to form a continuous liquid film. Indicative consumption: 2 wipes/m², depending on the level of soiling and surface texture. Medical instruments/equipment (e.g. ECG electrodes, stethoscope, ultrasound probes, monitoring bracelets, examination tables): cover entirely with a liquid film; contact time 5–60 min depending on the disinfection level required. High level (HLD): ensure 60 min contact time for sporicidal, mycobactericidal, and tuberculocidal spectrum. Rinsing: not required. Recommended Uses Cleaning and disinfection of surfaces, instruments, and medical devices in medical and non-medical environments. High-traffic areas and contact points (handles, tables, countertops, external equipment). Mobile interventions (e.g. ambulance) and satellite spaces (offices/canteens) in medical units. Note: The product is used undiluted and does not require rinsing. Lab Validated. Field Effective. Efficacy testing: National Biocidal Products Commission Approval – No. 2394BIO/02/12.30 Efficacy and Contact Times Activity5 min10 min60 min Bactericidal Yes–– Yeasticidal Yes Yes– Fungicidal Yes Yes– Mycobactericidal––Yes Tuberculocidal––Yes Virucidal Yes–– Sporicidal––Yes Spectrum of Activity Pathogen Type Relevant Species/Strains Eliminated Notes Gram-positive bacteria Staphylococcus aureus, Enterococcus hirae, Enterococcus faecium, Staphylococcus aureus (MRSA)Extended spectrum Gram-negative bacteria Pseudomonas aeruginosa, Escherichia coli K12, Klebsiella pneumoniae High efficacy Mycobacteria Mycobacterium avium, Mycobacterium terrae Full coverage Yeasts and Fungi Candida albicans, Candida auris, Aspergillus brasiliensis, Aspergillus niger Including resistant strains Enveloped and non-enveloped viruses Poliovirus type 1, Adenovirus type 5, Murine norovirus, Coronavirus, Enterovirus, Hepatitis A virus, Herpesviridae, Hepatitis B virus (HBV), Hepatitis C virus (HCV), Hepatitis Delta virus (HDV), Human Immunodeficiency virus (HIV), Human T-cell lymphotropic virus (HTLV), Parvovirus B19, Influenza virus, Rotavirus, Paramyxoviridae, Rhinovirus, Rubella virus, Papillomavirus, Measles virus, Polyomavirus, Rabies virus, Poxviridae, Caliciviridae, Astrovirus Broad spectrum Spores Bacillus cereus, Bacillus subtilis, Clostridium difficile Full sporicidal efficacy Application Guidelines Method / Efficacy Application Dose Contact Time Spray/wipe – bactericidal/yeasticidal/fungicidal, virucidal2 wipes/m²5 min Spray/wipe – mycobactericidal/tuberculocidal/sporicidal2 wipes/m²60 min Instrument wiping – bactericidal/virucidal As is5 min Instrument wiping – yeasticidal/fungicidal As is10 min Instrument immersion – mycobactericidal/tuberculocidal/sporicidal As is60 min