Set of 50 Silicone Skeleton caps 12mm Pink

Complete guide: Set of 50 Silicone Skeleton caps 12mm Pink

This product is a set of 50 silicone ink caps, Ø12mm diameter, skull-shaped, designed to keep ink within reach while working. They are useful for any artist who needs stable containers on the work surface that do not slip or spill ink upon accidental contact. Being made of silicone, they offer extra protection for the needle tip compared to classic rigid caps.

How to use

1. Prepare the work surface (table or articulated arm) disinfected and, if applicable, covered with a protective barrier, according to the studio's hygiene protocol.
2. Remove the caps from the packaging with clean hands or gloves, avoiding touching the inner part that will come into contact with the ink.
3. Place the cap on the work surface — the base shape molds to the table and provides a stable grip, so it does not tip over easily.
4. Pour the ink into the cap without filling it completely — leave a safety margin at the edge to avoid spillage upon sudden movement.
5. Dip the needle tip into the ink, being careful not to hit the edge of the cap with the needle to avoid damaging the tip.
6. As the ink is used up, add the necessary amount, but do not mix new ink with leftover ink from a previous session.
7. At the end of the session, discard the cap and remaining ink according to hygiene norms — do not keep or reuse.

Tips from us

• Pour ink gradually, in the amount needed for the session, so as not to waste unused ink left in the cap.
• Always keep a spare set on hand, as it is a consumable that runs out quickly if you work often.
• If you use multiple colors in the same session, arrange the caps grouped on the work surface for better organization.
• Handle the caps with clean hands or gloves before filling to avoid ink contamination.
• Visually inspect each cap before use — if it appears damaged or the packaging is compromised, do not use it.

Frequently asked questions