Pot băga această cutie în autoclav sau e doar pentru depozitare?

Este proiectată special pentru autoclav: rezistă la temperaturi de până la 134 °C și la presiunile ridicate din ciclul de sterilizare. Orificiile de ventilare permit pătrunderea aburului în interior, astfel încât instrumentele din cutie să fie sterilizate complet. După ciclu, aceeași cutie servește și ca depozitare sterilă până la utilizare.

Ce instrumente încap în dimensiunea 20x10x4 cm?

Dimensiunea medie de 20x10x4 cm este potrivită pentru grip-uri, tuburi, pense, foarfece și seturi de instrumente de dimensiuni standard. Dacă ai instrumentar mai mic sau mai voluminos, există și variantele 17x7x3 cm și 26x15x5 cm — alege în funcție de ce folosești cel mai des.

Cum se curăță și se întreține cutia între sterilizări?

Se spală cu apă caldă și săpun, apoi se poate dezinfecta cu orice soluție profesională de dezinfecție. Suprafața netedă și lustruită nu reține bacterii și se curăță ușor. Oțelul inoxidabil rezistă la substanțele chimice de curățare uzuale, deci nu se degradează în timp cu întreținere normală.

Cât rezistă în timp? Se uzează după multe cicluri de autoclavare?

Cutia poate fi sterilizată de un număr nelimitat de ori fără să își piardă proprietățile sau integritatea structurală. Oțelul inoxidabil (cu minimum 11% crom în compoziție) este rezistent la coroziune, la temperaturi extreme și la îngheț, deci practic este o investiție pe termen foarte lung.

Capacul se închide etanș? Instrumentele rămân protejate după sterilizare?

Da, capacul are un sistem de prindere sigură care asigură închiderea fermă a cutiei. Asta protejează instrumentele de contaminare după sterilizare și în timpul depozitării — cu condiția să nu deschizi cutia decât în momentul în care ai nevoie de instrumente.

E potrivită și pentru un cabinet medical, nu doar pentru studio de tatuaj?

Da. Cutia poate fi folosită pentru depozitarea și sterilizarea diferitelor tipuri de instrumente chirurgicale, deci este la fel de utilă într-un cabinet medical, de piercing sau de cosmetică profesională — oriunde există un protocol de sterilizare în autoclav.

Stainless steel box for sterilization 20x10x4 cm

Cod produs: 371437

57,00 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Specifications

Weight: 245 g
Dimensions: 20x10x4 cm
Material: Stainless steel
Resistance: Corrosion, heat, frost
Use: Autoclave sterilization
Maximum temperature: 134°C

Ghiduri utile:Mobilier și lampă de studio pentru tatuaj Scaunul de tatuat: cum îl alegi pe cel potrivit pentru studio Ergonomia la tatuat: scaun, taburet și braț de lucru fără dureri de spate

Presentation video

Guide & full description

Complete guide: Stainless steel box for sterilization 20x10x4 cm

A stainless steel instrument box, designed for sterilization and sterile storage of instruments in tattoo studios and professional clinics. With dimensions of 20x10x4 cm, it covers the needs for grips, tubes, forceps, and scissors of standard sizes. It withstands repeated autoclave cycles and common disinfectant solutions, making it a long-term investment for the hygiene protocol of any artist working with reusable instruments.

How to use

First clean the instruments of visible residues (pigment, ointment) according to your pre-cleaning protocol — sterilization does not replace prior mechanical cleaning.
Place the instruments in the box without excessive overlapping, so that steam can circulate around each piece.
Close the lid with the locking system — secure closure prevents contamination of instruments after sterilization.
Insert the box into the autoclave and run the sterilization cycle according to your device's instructions; the ventilation holes allow steam to penetrate inside.
Let the box cool down before handling — after the cycle, the metal is hot.
Keep the instruments in the closed box until the moment of use: after autoclaving, the box also functions as a sterile storage system.
After each use, wash the box with warm water and soap, then disinfect it before the next cycle.

Tips from us

Choose the size according to your instruments: the range also includes the 17x7x3 cm and 26x15x5 cm variants, so opt for the 20x10x4 cm version if you work with standard grips, tubes, and forceps.
Do not overload the box — steam must reach all surfaces of the instruments for complete sterilization.
Label or note the date of the last sterilization (for example with autoclave indicator tape on the outside), so you always know what is sterile and what is not.
The smooth, polished surface is easy to clean with any professional disinfectant solution — avoid abrasive sponges that can scratch the finish.
At 245 g, the box is light enough to handle comfortably, but sturdy enough for heavy daily use.
If you have multiple instrument sets, take multiple boxes: one in the autoclave, one in use, one in sterile storage — the workflow becomes much simpler.

Warning: The box is a sterilization accessory, not a sterilizer itself — instruments become sterile only after a complete and correct autoclave cycle. Always follow the pre-cleaning and disinfection protocol before autoclaving and do not open the box until the moment of instrument use, so as not to compromise sterility. Handle the box with care immediately after the cycle: the metal retains heat.

Frequently asked questions

Can I put this box in the autoclave or is it only for storage?▾

It is specially designed for the autoclave: it withstands temperatures up to 134 °C and the high pressures of the sterilization cycle. The ventilation holes allow steam to penetrate inside, so that the instruments in the box are completely sterilized. After the cycle, the same box also serves as sterile storage until use.

What instruments fit in the 20x10x4 cm size?▾

The average size of 20x10x4 cm is suitable for grips, tubes, forceps, scissors, and standard-sized instrument sets. If you have smaller or bulkier instruments, there are also the 17x7x3 cm and 26x15x5 cm variants — choose according to what you use most often.

How do you clean and maintain the box between sterilizations?▾

It is washed with warm water and soap, then can be disinfected with any professional disinfection solution. The smooth, polished surface does not retain bacteria and is easy to clean. Stainless steel resists common cleaning chemicals, so it does not degrade over time with normal maintenance.

How long does it last? Does it wear out after many autoclave cycles?▾

The box can be sterilized an unlimited number of times without losing its properties or structural integrity. Stainless steel (with at least 11% chromium in its composition) is resistant to corrosion, extreme temperatures, and frost, so it is practically a very long-term investment.

Does the lid close tightly? Do the instruments remain protected after sterilization?▾

Yes, the lid has a secure locking system that ensures the box is firmly closed. This protects the instruments from contamination after sterilization and during storage — provided you only open the box when you need the instruments.

Is it suitable for a medical office as well, not just for a tattoo studio?▾

Yes. The box can be used for storing and sterilizing various types of surgical instruments, so it is equally useful in a medical office, piercing studio, or professional cosmetics clinic — anywhere there is an autoclave sterilization protocol.

Product description

Stainless steel box for sterilization Size 20x10x4 cm The composition of the material is: Carbon: 0.07%, manganese: 2%, phosphorus: 0.045%, sulfur: 0.030%, silicon: 1%, chromium: 17-19%; nickel: 8-11%. The box is made of stainless steel, it is easy to maintain, and the microscopic structure of stainless steel gives it a high degree of hardness. Being made of stainless steel (contains at least 11% chromium), the box is resistant to corrosion and heat/frost. The instrument box can be used to store different types of surgical instruments. The stainless steel sterilization box measuring 20x10x4 cm is an indispensable accessory in any professional tattoo studio or medical office hygiene protocol. Made from high-quality surgical stainless steel, this box is specially designed for instrument sterilization in autoclaves at high temperatures and pressures. The medium 20x10x4 cm dimension is ideal for grips, tubes, tweezers, scissors, and standard-sized instrument sets. The secure-locking lid ensures airtight closure during the autoclaving process, preventing instrument contamination after sterilization. The smooth polished surface doesn't harbor bacteria and cleans easily with any professional disinfectant solution. Stainless steel is resistant to corrosion, extreme temperatures, and chemical cleaning agents, guaranteeing long-lasting life without degradation. The box can be sterilized unlimited times without losing properties or structural integrity. The ventilation hole design allows steam penetration inside the box during autoclaving, ensuring complete sterilization of all instruments. After autoclaving, the box also serves as a sterile storage system, maintaining instruments in hygienic conditions until use. Investing in a stainless steel sterilization box is a fundamental professional equipment component demonstrating the studio's commitment to the highest safety and hygiene standards. Frequently Asked Questions What material is the box made of? The box is made from high-quality surgical stainless steel, resistant to corrosion, extreme temperatures, and chemical disinfectants. Can it be used in an autoclave? Yes, the box is specially designed for autoclave use, withstanding temperatures up to 134 degrees Celsius and high pressures during the sterilization cycle. What instruments fit in the 20x10x4 cm size? The 20x10x4 cm size is suitable for grips, tubes, tweezers, scissors, and standard-sized instrument sets. Choose the size based on instruments you use most frequently. How many times can it be sterilized? The stainless steel box can be sterilized unlimited times without losing properties or structural integrity. It's a lifetime investment. How is the box cleaned? Wash with warm water and antibacterial soap, then disinfect with any professional solution. The smooth surface doesn't harbor bacteria and allows easy cleaning. Does the lid close airtight? Yes, the lid has a secure locking system ensuring airtight closure, protecting instruments from contamination after sterilization and during storage. Does it have ventilation holes? Yes, the box is designed with holes allowing steam penetration inside during autoclaving, ensuring complete sterilization of all instruments. Is it corrosion resistant? Yes, surgical stainless steel is extremely resistant to corrosion, moisture, and chemical substances used in tattoo studios and medical offices. Can it also be used for storage? Yes, after sterilization, the box also serves as a sterile storage system, maintaining instruments in hygienic conditions until use. Are other sizes available? Yes, stainless steel sterilization boxes are available in multiple sizes: 17x7x3 cm, 20x10x4 cm, and 26x15x5 cm. Choose according to your needs.