Pe ce tipuri de mașini de tatuat se potrivesc aceste înveliroare?

Formatul de 14,5 × 13 cm este gândit pentru mașinile clasice — coil și rotative — pe care le acoperă ca o pungă trasă peste corpul mașinii și fixată la bază. Pentru mașinile tip pen, care au corp lung și tubular, există și înveliroare dedicate, mai lungi și mai înguste; dacă lucrezi cu pen, compară dimensiunea de 14,5 × 13 cm cu lungimea mașinii tale înainte de a comanda.

De ce e nevoie de învelitoare dacă oricum dezinfectez mașina după fiecare client?

Mașina de tatuat are componente și zone greu accesibile care nu pot fi curățate la fel de riguros ca o suprafață netedă, iar unele nu suportă imersie sau sterilizare. Bariera fizică previne de la bun început contactul cu tuș, sânge și fluide, așa că dezinfectarea de după sesiune rămâne o măsură de siguranță suplimentară, nu singura linie de apărare. Este abordarea standard de prevenire a contaminării încrucișate în studiourile profesioniste.

Plasticul de pe mașină nu mă încurcă la lucru? Mai văd setările?

Materialul este transparent (nuanță albastră), deci vezi mașina și zona de prindere prin barieră fără să o dai jos. Folia subțire nu împiedică manevrarea; important e să fixezi bine înveliroarea la bază, ca să nu alunece din cauza vibrațiilor și să nu-ți fluture pe mână în timpul lucrului.

Cum arunc corect înveliroarele folosite?

După sesiune, scoate înveliroarea cu mănușile pe mâini, rulează-o cu fața contaminată spre interior și elimin-o împreună cu restul consumabilelor potențial contaminate, conform procedurii de deșeuri a studioului și normelor sanitare în vigoare. Nu o arunca desfăcută la coșul obișnuit din zona de lucru și, evident, nu o refolosi niciodată.

Cât îmi ajunge un pachet de 250 de bucăți?

Consumul e de minimum o bucată per client — plus înlocuiri dacă schimbi mașina în timpul sesiunii sau dacă o barieră se deteriorează. Pentru un artist care lucrează constant, pachetul de 250 acoperă câteva luni bune de activitate, motiv pentru care formatul mare este mai economic per sesiune decât pachetele mici.

Trebuie schimbată înveliroarea și în timpul unei sesiuni lungi cu același client?

Pentru același client, aceeași învelitoare poate rămâne pe mașină pe durata sesiunii, cât timp e intactă și fixată corect. O schimbi însă imediat dacă se rupe, se deplasează de pe mașină sau dacă faci o pauză în care echipamentul iese din zona de lucru controlată. La client nou — întotdeauna barieră nouă.

Disposable tattoo machine covers 250 pieces

Cod produs: 375269

24,70 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Quick:

Specifications

Packaging: 250 pcs
Dimensions: 14.5cm*13cm
Material: high quality plastic
Color: transparent blue
Quantity: 250 pcs
Usage: disposable
Compatibility: coil, rotary, pen

Ghiduri utile:Consumabile de tatuaj — lista completă și la ce folosesc Consumabile pentru un studio de tatuaj: lista completă lunară Consumabile de unică folosință pentru studioul de tatuaj: ghid complet

Presentation video

Guide & full description

Complete guide: Disposable tattoo machine covers 250 pieces

Disposable protective barriers that cover the tattoo machine during work, creating a physical layer between the equipment and splashes of ink, blood, or fluids. They are a basic consumable in any professional studio: they protect the machine from cross-contamination and save you from deep disinfection of the equipment after each client. The set of 250 pieces (14.5 × 13 cm, transparent blue plastic) covers an active artist's stock for a long period at a low cost per session.

How to use

Wash your hands and put on clean gloves before setup, so the cover remains uncontaminated during application.
Take a single cover from the pack and unfold it without touching the interior more than necessary.
Pull the cover over the machine body so that it completely covers the areas you touch during work.
Secure it at the base with an elastic band or adhesive tape, so it does not slip due to machine vibrations.
Check through the transparent plastic that you can see the machine and that nothing hinders its normal handling.
At the end of the session, remove the cover with gloves still on, rolling it with the contaminated side inward.
Dispose of the used cover according to your studio's waste procedure — never reuse it.
Disinfect the machine surfaces according to your hygiene routine before storing or re-covering for the next client.

Tips from us

Use a new cover for each client, without exception — even if the old one looks clean, the single-use rule is non-negotiable.
Combine the machine cover with other protective barriers (film on clip cord, grip covers, film on surfaces) — protection works only as a complete system.
Check the fit on your machine at first use: at 14.5 × 13 cm, make sure the format completely covers your machine body before relying on it for long sessions.
If the cover tears or shifts during work, stop, disinfect the machine, and apply a new one — do not continue with a compromised barrier.
Store the pack in a clean, dry place away from the work area so unused covers are not splashed or contaminated.
The transparent blue color helps you see the machine through the barrier and, at the same time, quickly distinguish barrier consumables from other materials on the work station.

Warning: The cover is strictly single-use: it must be changed after each client, even if it shows no visible signs of contamination. Remove and dispose of it while wearing gloves, and manage the resulting waste as potentially contaminated waste, according to the health regulations applicable to your studio. The barrier does not replace machine disinfection — it complements it.

Frequently asked questions

What types of tattoo machines do these covers fit?▾

The 14.5 × 13 cm format is designed for classic machines — coil and rotary — covering them like a bag pulled over the machine body and secured at the base. For pen-type machines, which have a long, tubular body, there are dedicated covers that are longer and narrower; if you work with a pen, compare the 14.5 × 13 cm size with your machine's length before ordering.

Why do I need a cover if I disinfect the machine after each client anyway?▾

Tattoo machines have components and hard-to-reach areas that cannot be cleaned as thoroughly as a smooth surface, and some do not withstand immersion or sterilization. The physical barrier prevents contact with ink, blood, and fluids from the start, so disinfection after the session remains an additional safety measure, not the sole line of defense. It is the standard approach to prevent cross-contamination in professional studios.

Won't the plastic on the machine get in the way? Can I still see the settings?▾

The material is transparent (blue tint), so you can see the machine and grip area through the barrier without removing it. The thin film does not hinder handling; the important thing is to secure the cover well at the base so it does not slip due to vibrations and does not flap on your hand during work.

How do I properly dispose of used covers?▾

After the session, remove the cover with gloved hands, roll it with the contaminated side inward, and dispose of it along with other potentially contaminated consumables, following your studio's waste procedure and applicable health regulations. Do not throw it open into the regular trash in the work area, and obviously never reuse it.

How long does a pack of 250 pieces last?▾

Consumption is at least one piece per client — plus replacements if you change machines during the session or if a barrier gets damaged. For an artist who works consistently, a pack of 250 covers several months of activity, which is why the large format is more economical per session than small packs.

Do I need to change the cover during a long session with the same client?▾

For the same client, the same cover can remain on the machine for the duration of the session, as long as it is intact and properly secured. However, you should change it immediately if it tears, shifts off the machine, or if you take a break where the equipment leaves the controlled work area. For a new client — always a new barrier.

Product description

Disposable tattoo machine covers Size: 14.5cm*13cm Disposable tattoo machine covers that are indispensable for any professional artist. It helps keep the tattoo machine clean and offers protection against cross-contamination. Material: high quality plastic Color: transparent blue Set of 250 pieces Tattoo machine covers in a 250-piece pack are the fundamental cross-contamination protection barriers in any professional tattoo studio environment operating under sanitary regulations. Made from medical-grade transparent polyethylene, these protective bags completely cover the tattoo machine creating a physical barrier between expensive equipment and potential contamination with blood, ink and bodily fluids during tattooing procedures. Generously sized to fit all types of tattoo machines including traditional coil, rotary and modern pen style devices, the covers apply quickly before each session and are discarded immediately after client completion. The transparent material allows clear viewing of the machine, its buttons, settings and any visual indicators without compromising protection integrity at any point during the session. The 250-piece pack ensures months of consistent supply at an excellent per-unit price, making it the economically sound choice for studios with regular client flow. Using machine covers is mandatory according to current sanitary standards and prevents the costly and time-consuming deep disinfection of the machine after each client, streamlining the between-client preparation process significantly. An indispensable consumable that protects both expensive professional equipment and client health simultaneously. The material does not affect machine performance, heat dissipation or the artist's ability to control the device during work. Compatible with all standard clip cord and RCA cable connections. Frequently Asked Questions What types of machines do the covers fit? The covers are universally sized and fit coil machines, classic rotary and pen machines. The elastic material adapts to different machine shapes and sizes. Why are they transparent and not colored? Transparency allows the artist to see the machine, buttons, settings and any issues without removing the cover. This is essential for machine control during work. How many covers are used per session? One new cover is used per client. If the machine is changed during the session or there's a long break, changing the cover is recommended as an additional precaution. How is the cover secured on the machine? Pull the cover over the machine and secure at the base with a rubber band or adhesive tape. Ensure it fully covers the machine and cannot accidentally shift. Does the cover affect machine performance? No, the thin material doesn't affect machine operation, heat dissipation or maneuverability. The machine functions identically with or without the cover. Can I use the same cover for two clients? Absolutely not. The cover is single-use and must be changed after each client, even if not visibly contaminated. This is a fundamental hygiene rule. How long does the 250-piece pack last? At an average of 3 clients per day, 5 days per week, an artist uses approximately 60-75 covers per month. The 250-piece pack covers 3-4 months of work for one artist. Are they different from pen machine covers? The covers in this set are sized for classic machines. For pen-style machines there are dedicated covers, longer and thinner, perfectly fitting the pen's tubular shape. What do I do if the cover tears during work? Stop immediately, remove the damaged cover, fully disinfect the machine with professional solution and apply a new cover. Note the incident in the hygiene register. How are used covers properly disposed of? Used covers are disposed of in the yellow medical waste bag, not in household waste. They are considered contaminated waste and must be managed according to sanitary legislation.