Klinomed Wipes - Surface Wipes 85% Alcohol 120pcs/tube - BOX 6 PCS
Specifications
- Packaging
- 80 buc
- Quantity
- 18 packs/carton
- Size
- 200×200 mm
- Material
- Polyester + viscose
Ghiduri utile:Dezinfectanți pentru studio: mâini, instrumentar, suprafețe — ghidul categorieiTimp de contact și spectru la dezinfectanți: cum citești eticheta corectIgienă și sterilizare în studioul de tatuaj — bazele
Guide & full description
Complete guide: Klinomed Wipes - Surface Wipes 85% Alcohol 120pcs/tube - BOX 6 PCS
Pre-impregnated wet wipes with disinfectant solution, ready to use, for cleaning and disinfection of surfaces, instruments, and medical devices. The box contains 18 packs of 80 pieces each (1440 wipes total), an economical format designed for constant professional use. Suitable for tattoo studios, offices, clinics, and any workspace where frequently touched surfaces and points need rapid disinfection by simple wiping, without dilution and without rinsing.
How to use
- Open the pack and remove one impregnated wipe, then immediately reseal the self-adhesive foil or cap to prevent the solution from evaporating.
- Wipe the target surface so as to form a continuous and uniform film of liquid — not just a superficial pass.
- Dose correctly: approximately 2 wipes/m², depending on the degree of dirt and the surface texture.
- Observe the contact time according to the desired disinfection level: 5 minutes for bactericidal and virucidal effect, 10 minutes for yeasticidal and fungicidal effect, 60 minutes for mycobactericidal, tuberculocidal, and sporicidal effect.
- For instruments and equipment (e.g., device surfaces, work tables), fully cover with the liquid film and let it act for 5–60 minutes, depending on the intended disinfection level.
- Do not rinse after application — the product is used as is, undiluted, and does not require rinsing.
- Dispose of the used wipe in the trash; do not reuse it on another surface to avoid cross-contamination.
Tips from us
- For high-level disinfection (sporicidal, mycobactericidal, tuberculocidal spectrum) ensure the full contact time of 60 minutes — the surface must remain moist for the entire duration.
- Use a new wipe for each distinct area or object; the 'one wipe, one surface' rule reduces the risk of cross-contamination.
- In the studio, integrate them into the routine between clients for frequently touched points: handles, countertops, work tables, external equipment.
- The product effectively cleans and degreases even on dirty surfaces, but on abundant visible dirt it is more efficient to wipe off the bulk first and then disinfect with a new wipe.
- The box format of 18 packs allows you to keep one pack at each work station, with the rest sealed in stock — the solution remains active only in closed packaging.
- It does not stain or discolor, so it can be used worry-free on common work surfaces.
Frequently asked questions
Do they need to be diluted or rinsed after use?▾
No. The wipes are pre-impregnated and ready to use: they are used as is, undiluted, and the surface does not require rinsing after application. You apply by wiping, let the liquid film act for the necessary contact time, and that's it.
How long does the solution need to act to effectively disinfect?▾
It depends on the desired disinfection level: bactericidal and virucidal effect is achieved in 5 minutes, yeasticidal and fungicidal effect in 10 minutes, and mycobactericidal, tuberculocidal, and sporicidal effect requires 60 minutes of contact. It is important that the surface remains covered with a liquid film for the entire duration.
Are they suitable for a tattoo studio?▾
Yes. They are intended for cleaning and disinfection of surfaces, instruments, and devices in medical and non-medical settings, including studios. In practice, you use them on work tables, countertops, handles, chair arms, external equipment — i.e., surfaces touched between clients. However, note: for instruments that come into contact with broken skin, disinfectant wiping does not replace sterilization or single-use consumables.
How many wipes do I use for one disinfection?▾
The indicative consumption is 2 wipes/m², depending on how dirty the surface is and its texture. One pack contains 80 pieces, and the box contains 18 packs (1440 wipes), so it easily covers daily professional use.
How do I store the pack to prevent the wipes from drying out?▾
The packaging is impermeable and fitted with a lid or self-adhesive foil precisely for good sealing between uses. Close it immediately after removing a wipe and open packs from the box one by one as you use them — this keeps the impregnation solution active.
Does it stain or discolor surfaces?▾
No — according to the manufacturer, the product does not stain or discolor, and the wipe material (polyester + viscose) together with low-foaming surfactants ensures effective cleaning and degreasing without visible residues. However, avoid surfaces that come into direct contact with food.
Product description
You might also like
Reviews
No reviews yet. Bought this product? Be the first to leave one.







