Complete guide: Dispenser pump for disinfectant 500ml/1000ml
This accessory screws onto the mouth of 500 ml or 1000 ml bottles and turns your disinfectant or liquid soap container into a practical dispenser, operated with a simple press. It is designed for tattoo studios and for any space where hand hygiene between clients matters, because it eliminates the need to tilt or overturn the bottle. It is part of the Schulke range and, according to the product description, is made in Germany.
How to use
- Unscrew the cap of your 500 ml or 1000 ml disinfectant or liquid soap bottle.
- Insert the pump tube into the bottle, almost to the bottom, so it draws the liquid down to the last drop.
- Screw the pump mechanism onto the bottle's thread and tighten firmly to prevent leaks.
- Prime the pump: press a few times until the liquid fills the tube and comes out steadily.
- For one dose, fully press the head once — according to the description, about 1-3 ml is released — and rub the solution on your hands.
- You can operate the head with one hand or even with your forearm, when your hands are already contaminated and you don't want to touch the container.
- When the bottle is empty, unscrew the pump and move it to a new bottle of the same size, reusing it.
Tips from us
- Rinse the tube and mechanism with a little new solution (or warm water) before mounting the pump on a fresh bottle.
- Dedicate a separate pump for each product type — do not alternate disinfectant and soap on the same pump without cleaning, to avoid mixing solutions.
- Periodically check that the mechanism is not dripping and tighten again on the thread if you notice leaks.
- If pressing becomes hard, rinse the pump with warm water to dissolve any deposits.
- Keep the bottle with pump within reach, near the work area, so disinfection between clients is quick and effortless.
Warning: Before purchase, check the thread diameter of your bottle. According to the description, the pump has a standard 28 mm thread — most common on professional 500 ml and 1000 ml containers — but this may vary by brand, so measure it to be safe. Remember that this is just a dispensing accessory: it does not contain or replace the actual disinfectant. Do not mix different products in the same bottle without cleaning the pump beforehand, and always follow the solution manufacturer's instructions regarding dosage and contact time.
Frequently asked questions
Which bottles is the pump compatible with?▾
It is designed for standard 500 ml and 1000 ml bottles used by professional disinfectant manufacturers. According to the description, it has a standard 28 mm thread and is tested with Schulke containers (e.g., Desderman Care and Mikrozid). Since the thread may vary between brands, check the diameter of your bottle's mouth before ordering.
How much solution does it release per press?▾
According to the product description, one full press releases approximately 1-3 ml, a suitable amount for a hand disinfectant application. Press the head all the way down to get the full dose.
How do I maintain the pump and can I reuse it?▾
Yes, the pump can be transferred from an empty bottle to a new one of the same size. Rinse the tube and mechanism with a little new solution before mounting, and if pressing becomes hard, wash it with warm water. Replace the pump if you notice damage to the mechanism or persistent leaks.
Is disinfectant included with the pump purchase?▾
No. The dispensing pump is an accessory that is purchased separately from the disinfectant or soap bottles. The advantage is that you can move it from an emptied container to a new one, reusing it multiple times.
Does it work with liquid soap as well?▾
Yes, it can also be used with liquid soap or other solutions with similar viscosity, as long as the bottle has a compatible thread. However, do not mix different products in the same container without cleaning the pump between them — ideally, dedicate one pump for each product type.
What do I do if the pump drips or gets stuck?▾
If it drips, first check that the mechanism is tightly screwed onto the thread and tighten it again. If it is hard to operate, rinse it with warm water to dissolve deposits. If the problem persists or the mechanism is damaged, replace the pump.
Product description
Dispenser pump for disinfectant 500ml/1000ml Dispenser pump for liquid soap - 500 ml and 1 liter bottle - for products from the Schulke range Made in Germany
Dosing Pump for Disinfectant 500ml/1000ml is an essential accessory for tattoo studios using liquid disinfectants in 500ml or 1000ml containers. This pump is mounted by screwing onto the container opening and allows precise and hygienic dosing of hand disinfectant or other liquid solutions, eliminating the need to tip or tilt the container. The pump mechanism releases approximately 1-3ml of product with each full press, ensuring the correct dosing recommended by professional disinfectant manufacturers. Using the dosing pump prevents spills, product waste, and contamination of the container contents. The ergonomic design allows operation with one hand or even with the forearm, which is particularly useful when hands are contaminated and you don't want to touch the container. The pump is compatible with standard 500ml and 1000ml containers used by professional disinfectant manufacturers, including Schulke (Desderman Care, Mikrozid, and other products in the range). The pump's durable material ensures a long service life and can be transferred from an empty container to a new one, reducing costs and plastic waste. The standard 28mm threading ensures compatibility with most professional containers available on the market. The dosing pump is a small but significant investment in improving studio hygiene and efficiency, facilitating compliance with hand disinfection protocols between clients. Available on tatuat.ro, this accessory is a must-have for every professional studio committed to maintaining impeccable hygiene standards.
Frequently Asked Questions What containers is the pump compatible with? The pump is compatible with standard 500ml and 1000ml containers used by professional disinfectant manufacturers. It is tested with Schulke containers (Desderman Care, Mikrozid) and other brands with standard threading. Check thread compatibility before purchase. How much disinfectant does the pump release per press? The pump releases approximately 1-3ml of product per full press, depending on the specific model. This amount corresponds to the recommended dose of disinfectant for one hand application. A full press ensures the optimal amount for hygienic disinfection. Can the pump be reused on a new container? Yes, the pump can be transferred from an empty container to a new one of the same size. Rinse the pump with a little new solution before mounting on a fresh container. Replace the pump if you notice mechanism deterioration or leaks. Why is the pump better than direct pouring? The pump offers several advantages: precise and consistent dosing, one-hand operation, prevention of content contamination, elimination of spills and waste, and the ability to operate with the forearm when hands are contaminated. It is the hygiene standard in professional environments. Does the pump get clogged? Quality pumps are designed not to clog under normal use conditions with liquid disinfectants. If the pump becomes difficult to operate, rinse it with warm water. Disinfectant crystallization around the mechanism can be prevented through regular use and periodic cleaning. Is the pump included with the disinfectant purchase? No, the dosing pump is purchased separately from the disinfectant containers. This allows customers to choose whether they want the pump and to reuse it on multiple containers. It is a one-time investment that serves long-term. Does the pump fit containers from other brands? The pump is designed for containers with standard 28mm threading, which is the most common in the industry. Most professional disinfectant containers of 500ml and 1000ml use this threading. Check your container's thread diameter for compatibility. How much does the dosing pump cost? The dosing pump has an accessible price, representing a minimal investment compared to the hygiene and economy benefits it provides. Check the current price on tatuat.ro. Considering that one pump can be reused on multiple containers, the cost per use is negligible. How is the pump mounted on the container? Installation is simple: unscrew the disinfectant container cap, insert the pump tube into the container, and screw the pump mechanism onto the container threading. Ensure the pump is securely fastened to prevent leaks. Press several times to fill the tube. Does the pump also work with liquid soap? Yes, the pump can also be used with liquid soap or other solutions of similar viscosity, as long as the container has compatible threading. However, do not mix different products in the same container without prior pump cleaning. Dedicate separate pumps for different products.
