Ce avantaj are față de o rolă simplă de hârtie?

Combină două funcții pe care hârtia simplă nu le poate oferi împreună: stratul de hârtie absoarbe lichidele de la suprafață (tuș, sânge, vaselină, soluții de curățare), iar stratul de polietilenă de dedesubt formează o barieră impermeabilă care nu lasă nimic să treacă spre saltea. Cu hârtia simplă, lichidele pot penetra până la pat; aici salteaua rămâne protejată complet, ceea ce îi prelungește durata de viață și reduce costurile de întreținere a echipamentului.

Câte ședințe îmi ajunge o rolă de 50 m?

Orientativ, aproximativ 25–28 de utilizări complete, dacă socotești circa 1,8–2 m de material per client pentru un pat de lucru standard. Pentru un studio cu volum mediu de clienți, asta înseamnă de regulă una până la două săptămâni de activitate cu o singură rolă.

Cum elimin corect materialul după ședință?

Rulezi folia folosită cu partea contaminată spre interior, astfel încât suprafața care a intrat în contact cu clientul și cu lichidele să rămână închisă în interiorul sulului, apoi o elimini conform reglementărilor de gestionare a deșeurilor din studioul tău. După contaminare, materialul nu se reciclează. Nu uita că, separat de schimbarea foliei, patul se dezinfectează între clienți.

Se potrivește pe orice pat de lucru?

Lățimea de 50 cm este gândită să acopere eficient zona centrală a patului, adică exact suprafața pe care stă clientul. Materialul este flexibil și se adaptează la diverse configurații de pat: îl derulezi pe lungimea necesară și îl rupi la perforație sau îl tai la dimensiunea dorită. Dacă patul tău este mai lat și vrei acoperire completă pe margini, poți așeza două fâșii alăturate.

Stratul de polietilenă face zgomot când se mișcă clientul?

Nu. Folia de polietilenă este subțire și flexibilă, concepută să nu foșnească deranjant la mișcare, iar stratul de hârtie de deasupra atenuează suplimentar orice sunet. Clientul simte practic o suprafață de hârtie obișnuită, moale și neutră la atingere, fără să perceapă folia impermeabilă de dedesubt.

Pot folosi rola și în alt tip de cabinet, nu doar la tatuaj?

Da. Pe lângă studiourile de tatuaj și PMU, produsul este destinat și saloanelor de masaj și înfrumusețare, clinicilor, cabinetelor medicale și celor ginecologice — oriunde este nevoie de o suprafață igienică de unică folosință, absorbantă deasupra și impermeabilă dedesubt. Modul de utilizare este același: derulezi, rupi la dimensiunea dorită și schimbi folia după fiecare persoană.

Polyethylene roll + paper 50cmx50m

Cod produs: 371214

57,00 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Quick:

Specifications

Weight: 710 g
Material: Polyethylene + paper
Dimensions: 50cm x 50m
Format: Roll
Color: Blue
Lamination: 2 laminated layers
Perforation: 38 cm
Usage: Hygienic protection

Ghiduri utile:Consumabile de tatuaj — lista completă și la ce folosesc Consumabile pentru un studio de tatuaj: lista completă lunară Consumabile de unică folosință pentru studioul de tatuaj: ghid complet

Guide & full description

Complete guide: Polyethylene roll + paper 50cmx50m

Roll of hygienic protection made of two laminated layers — absorbent paper on top and waterproof polyethylene underneath — designed for covering beds and work surfaces. The paper layer retains ink, blood, Vaseline and cleaning solutions, and the polyethylene film completely blocks liquids from reaching the mattress. It is the natural choice for tattoo and PMU studios, but also for beauty salons, massage or medical offices, wherever the work bed needs to be protected between clients.

How to use

Mount the roll on a wall or table holder for even unrolling; if you don't have a holder, you can unroll it manually, directly on the bed.
Unroll the material along the length of the bed, enough to cover the entire contact area with the client.
Tear at one of the perforations placed every 38 cm or cut to the exact size you need.
Place the foil with the paper side up, towards the client, and the polyethylene down, towards the mattress — only this way the paper absorbs and the polyethylene insulates.
Work normally during the session; the polyethylene layer is thin and flexible, so it does not produce noise when the client moves.
At the end, roll up the used foil with the contaminated side inward.
Dispose of the material according to the waste management procedures of your studio, then disinfect the bed surface.
Spread a new foil before each client — the product is strictly single-use.

Tips from us

Calculate your stock: with an indicative consumption of 1.8–2 m per client, the 50 m roll covers approximately 25–28 sessions.
Use the perforations every 38 cm to quickly tear straight pieces without scissors when changing the foil between clients.
Always check the orientation of the layers before starting: if the polyethylene ends up on top, you lose both absorption and client comfort.
For procedures where more liquid is spilled, this double-layer construction is clearly superior to simple paper — liquid does not reach the mattress.
Store the roll in a clean, dry place, protected from splashes, so as not to compromise the paper layer before use.
A dedicated roll holder next to the bed visibly shortens the preparation time between clients.

Warning: Single-use product: never reuse an already used piece, even if it appears clean. The foil covers the bed, but does not replace disinfection — the bed surface is cleaned and disinfected between clients, according to the studio's hygiene protocol. The used material is rolled with the contaminated side inward and disposed of as waste according to applicable regulations; after contamination, the paper-polyethylene combination is not recyclable.

Frequently asked questions

What advantage does it have over a simple roll of paper?▾

It combines two functions that simple paper cannot offer together: the paper layer absorbs liquids from the surface (ink, blood, Vaseline, cleaning solutions), and the polyethylene layer underneath forms a waterproof barrier that lets nothing pass to the mattress. With simple paper, liquids can penetrate to the bed; here the mattress remains fully protected, which extends its lifespan and reduces equipment maintenance costs.

How many sessions does a 50 m roll last?▾

Approximately 25–28 full uses, if you count about 1.8–2 m of material per client for a standard work bed. For a studio with medium client volume, this usually means one to two weeks of activity with a single roll.

How do I properly dispose of the material after the session?▾

Roll up the used foil with the contaminated side inward, so that the surface that came into contact with the client and liquids remains enclosed inside the roll, then dispose of it according to your studio's waste management regulations. After contamination, the material is not recyclable. Don't forget that, separate from changing the foil, the bed is disinfected between clients.

Does it fit any work bed?▾

The 50 cm width is designed to effectively cover the central area of the bed, i.e., exactly the surface the client lies on. The material is flexible and adapts to various bed configurations: you unroll it to the needed length and tear at the perforation or cut to the desired size. If your bed is wider and you want full coverage on the edges, you can place two strips side by side.

Does the polyethylene layer make noise when the client moves?▾

No. The polyethylene film is thin and flexible, designed not to rustle annoyingly during movement, and the paper layer on top further attenuates any sound. The client essentially feels a regular paper surface, soft and neutral to the touch, without perceiving the waterproof film underneath.

Can I use the roll in other types of offices, not only for tattooing?▾

Yes. Besides tattoo and PMU studios, the product is also intended for massage and beauty salons, clinics, medical and gynecological offices — anywhere a single-use hygienic surface is needed, absorbent on top and waterproof underneath. The usage method is the same: unroll, tear to the desired size, and change the foil after each person.

Product description

Polyethylene roll + paper 50cmx50m2 laminated layers (1 paper layer + 1 PE (polyethylene) very well attached to each other by the point-to-point system)To facilitate their breaking, they are perforated from 38 cm to 38 cm Cosmetic applications: - in massage parlors, clinics and medical offices, gynecological offices, beauty salons. Instructions for use: Unroll the roll and tear to the desired size. Color: blue The dual-layer polyethylene and paper sheet roll, dimensions 50cm width and 50m length, represents the premium hygienic protection solution for beds in tattoo and PMU studios. The innovative two-layer construction combines the advantages of both materials: the upper paper layer provides an absorbent and comfortable surface for the client, while the lower polyethylene layer ensures total waterproofing, preventing any liquid penetration to the mattress. This combination is ideal for tattoo procedures where contact with ink, blood, petroleum jelly, and cleaning solutions is inevitable. Guaranteed waterproofing protects the investment in studio equipment, extending the bed mattress lifespan. The 50-meter roll provides a generous number of uses, and the 50cm width effectively covers the central area of the work bed. The material unrolls easily and cuts to desired size, facilitating quick replacement between clients. The polyethylene layer is thin but resistant, does not produce unpleasant noises with client movement, and does not compromise comfort. The choice of professionals who make no compromises on hygiene and protection. The dual-layer construction is the result of understanding the specific needs of tattoo studios, where liquid contact is a constant of every session. The absorbent paper layer retains ink, blood, petroleum jelly, and cleaning solutions, preventing liquid accumulation on the work surface. The polyethylene layer underneath acts as an absolute barrier, protecting the bed mattress from any liquid penetration. This dual protection significantly extends mattress life and reduces equipment maintenance costs. The material unrolls smoothly and cuts easily, and the paper-polyethylene combination flexibility allows adaptation to various bed and work surface configurations. Frequently Asked Questions What advantage does the dual-layer roll offer over simple paper? The dual-layer roll combines paper absorbency with polyethylene waterproofing. The paper layer absorbs surface liquids and provides comfort, while the polyethylene layer prevents any liquid penetration to the mattress, offering complete protection. Does the polyethylene layer make noise? No, the polyethylene layer is thin and flexible, specially designed not to produce unpleasant noises with client movement. The paper layer on top further attenuates any potential sound, ensuring acoustic comfort during the session. Is the roll suitable for procedures with heavy liquid spillage? Yes, this roll is ideal for procedures where contact with large amounts of liquids is inevitable. The polyethylene layer guarantees that no liquid will reach the mattress, protecting equipment and facilitating quick cleaning. Can I use the roll without a wall holder? Yes, the roll can be manually unrolled onto the desired surface without being mounted on a holder. However, mounting on a wall or table holder is recommended for increased efficiency and uniform material unrolling. How many uses does the 50m roll provide? The 50m roll provides approximately 25-28 complete uses, considering 1.8-2 meters per client length. This is sufficient for approximately 1-2 weeks of activity in a medium-volume studio. Is the paper layer comfortable for the client? Yes, the paper layer provides a soft and neutral surface that is comfortable to touch. The client does not feel the polyethylene layer underneath, benefiting from an experience similar to a regular paper surface. Is it more expensive than the simple paper roll? Yes, the dual-layer roll has a higher per-meter price than the simple paper roll due to additional materials and manufacturing process. However, the investment is justified by the superior waterproof protection that extends the bed mattress lifespan. How is the material disposed of after use? Used material is rolled with the contaminated side inward and disposed of as medical waste according to studio regulations. The paper-polyethylene combination is not recyclable after use in a medical environment. Does the material tear easily? No, the paper-polyethylene combination is more resistant than simple paper. The polyethylene layer adds additional tear resistance, making the material durable for the entire session duration. Is it recommended for all types of procedures? Yes, the dual-layer roll is recommended for any procedure in tattoo, PMU, and cosmetic studios. It is especially important for procedures involving significant amounts of liquids, where waterproof protection is essential.