Cum se aplică Aloe Tattoo Plus Spray, pas cu pas?

Curățați și uscați complet zona, apoi pulverizați uniform de la 15-20 cm distanță, într-un strat subțire. Așteptați 5-10 secunde până devine ușor lipicios, aplicați stencil-ul cu cerneala în jos și apăsați ferm. Îndepărtați hârtia cu grijă și lăsați stencil-ul să se usuce 5-10 minute înainte de a începe tatuarea.

Ce avantaje are formatul spray față de soluțiile lichide aplicate cu prosopul sau mâna?

Formatul spray oferă o acoperire mai uniformă, fără zone cu exces sau lipsă de produs, și elimină contactul direct al mâinii cu pielea clientului, ceea ce înseamnă igienă superioară. E și mai rapid de aplicat, dozează exact cât e nevoie și e mai ușor de folosit pentru artiștii la început de drum. Singurul minus e că necesită un spațiu ventilat și atenție la suprapulverizare pe zonele din jur.

Funcționează bine pe piele grasă?

Da, dar ca la orice soluție de transfer, rezultatul depinde de pregătirea pielii. Pe piele grasă, curățați suplimentar cu alcool izopropilic sau un gel de curățare, uscați complet, apoi aplicați spray-ul. Dacă stencil-ul nu se transferă complet din prima încercare, repetați aplicarea.

Cât ține un flacon de 100ml?

Un flacon de 100ml oferă aproximativ 80-120 aplicări, ceea ce înseamnă în jur de 2-4 luni pentru un artist cu 4-5 sesiuni pe săptămână. Consumul real depinde de dimensiunea stencil-urilor — unul mic are nevoie de 1-2 pulverizări, unul mare (spate, piept) poate necesita 4-6.

Cum se păstrează spray-ul între folosiri?

Păstrați flaconul bine închis, ferit de lumină directă și de surse de căldură, la loc uscat, așa cum se recomandă pentru orice produs cosmetic în format spray. Verificați aspectul și mirosul produsului înainte de fiecare utilizare și nu folosiți flaconul dacă observați modificări neobișnuite.

E compatibil cu orice tip de hârtie termală de stencil?

Da, este compatibil cu tipurile standard de hârtie termală folosite în tatuaj, inclusiv Spirit, S8 și ReproFX. Dacă folosiți un tip de hârtie mai puțin obișnuit, testați aderența pe o zonă mică înainte de aplicarea completă.

Transfer solution Aloe Tattoo Plus Spray 100ml

Cod produs: 4723234

67,00 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Quick:

Specifications

Volume: 100 ml
Format: Spray
Quantity: 100ml
Content: Aloe vera extract
Compatibility: Standard thermal paper
Applications: 80-120
Origin: Europe
Key ingredients: Toxin-free

Ghiduri utile:Consumabile de tatuaj — lista completă și la ce folosesc Consumabile pentru un studio de tatuaj: lista completă lunară Consumabile de unică folosință pentru studioul de tatuaj: ghid complet

Presentation video

Guide & full description

Complete guide: Transfer solution Aloe Tattoo Plus Spray 100ml

Aloe Tattoo Plus Spray 100ml is a transfer solution for tattoo stencils in spray format, designed for quick and hygienic application without direct hand contact with the client's skin. It contains aloe vera extract, which helps the stencil adhere and has a soothing effect on the skin prepared for tattooing. It is suitable both for beginner artists looking for a predictable and easy-to-control transfer, and for experienced ones who want a faster workflow than traditional methods using towels or manual application.

How to use

Clean and dry completely the area of skin where the stencil will be placed.
On oilier skin, additionally clean with isopropyl alcohol or a cleansing gel, then dry thoroughly before spraying.
Hold the bottle 15-20 cm away from the skin and spray evenly over the entire area in a single thin layer — avoid overspray.
Wait 5-10 seconds until the product becomes slightly tacky to the touch.
Place the thermal stencil with the ink facing down onto the prepared area and press firmly and evenly over the entire surface.
Carefully remove the paper, keeping the skin taut, for a clean transfer without slipping.
Allow the stencil to dry for 5-10 minutes before starting the tattoo so that the lines set well.
For large areas (back, chest), spray successively in stages to cover the entire surface evenly before the product dries.

Tips from us

A thin, even layer is sufficient — excess product can cause the paper to slip or the stencil to transfer unevenly.
On very oily skin, if the stencil does not transfer completely the first time, clean again and repeat the application.
Keep the bottle 15-20 cm from the skin when spraying for even coverage without excess in one area.
For curved or tricky areas (ribs, joints), spray a bit more generously and work quickly while the product is still tacky.
A 100ml bottle covers approximately 80-120 applications — plan your consumption based on your studio’s workload.
Work in a ventilated space and protect surrounding areas (clothing, work surfaces) when spraying to avoid unwanted overspray.

Warning: Clean and disinfect the skin area before application, following the usual pre-tattoo hygiene protocol. Apply the spray in a ventilated space and avoid contact with eyes or mucous membranes. If working with clients who have sensitive skin or known allergies to cosmetic ingredients, test on a small area before applying to the entire surface. The product is a transfer solution, not a disinfectant — it does not replace the standard steps of cleaning and preparing the skin before tattooing.

Frequently asked questions

How to apply Aloe Tattoo Plus Spray step by step?▾

Clean and dry the area completely, then spray evenly from 15-20 cm away in a thin layer. Wait 5-10 seconds until it becomes slightly tacky, apply the stencil with the ink facing down and press firmly. Carefully remove the paper and allow the stencil to dry for 5-10 minutes before starting the tattoo.

What advantages does the spray format have over liquid solutions applied with a towel or by hand?▾

The spray format provides more even coverage without areas of excess or lack of product, and eliminates direct hand contact with the client's skin, meaning superior hygiene. It is also faster to apply, dispenses exactly what is needed, and is easier to use for beginner artists. The only downside is that it requires a ventilated space and attention to overspray on surrounding areas.

Does it work well on oily skin?▾

Yes, but as with any transfer solution, the result depends on skin preparation. On oily skin, additionally clean with isopropyl alcohol or a cleansing gel, dry completely, then apply the spray. If the stencil does not transfer completely the first time, repeat the application.

How long does a 100ml bottle last?▾

A 100ml bottle provides approximately 80-120 applications, meaning around 2-4 months for an artist with 4-5 sessions per week. Actual consumption depends on stencil size — a small one needs 1-2 sprays, a large one (back, chest) may require 4-6.

How to store the spray between uses?▾

Keep the bottle tightly closed, away from direct light and heat sources, in a dry place, as recommended for any cosmetic product in spray format. Check the product's appearance and smell before each use and do not use the bottle if you notice any unusual changes.

Is it compatible with any type of thermal stencil paper?▾

Yes, it is compatible with standard types of thermal paper used in tattooing, including Spirit, S8 and ReproFX. If using a less common type of paper, test adhesion on a small area before full application.

Product description

Stencil Plus is a high-quality product that transfers the design to the skin in a convenient and safe way, without stains. Benefits:- Easier and faster application- Lasting effect Instructions for use: Spray once or twice on the skin and spread the product. Transfer the pattern to the skin and wait five minutes before starting the tattoo. Aloe Tattoo Plus Spray 100ml is a tattoo stencil transfer solution in an innovative spray format, offering a fast, uniform, and hygienic application method. Unlike traditional transfer solutions applied with towels or by hand, the spray format allows uniform coverage of the work area with a single spray, eliminating application inconsistencies that can cause partial or incomplete transfers. The formula contains aloe vera extract providing a dual benefit: optimal stencil adhesion on skin and a soothing, moisturizing effect that prepares the skin for the tattoo session. Aloe vera is recognized in the cosmetics industry for its anti-inflammatory and regenerative properties, making this transfer solution gentler on the skin than alcohol-based alternatives. The spray dries quickly on the skin, leaving a thin, uniform, slightly tacky layer that firmly anchors the thermal stencil ink. Works excellently on all skin types, including oily skin which is traditionally problematic for stencil adhesion. The 100ml format provides approximately 80-120 applications, depending on area size. Compared to Stencil Stuff or Spirit, Aloe Tattoo Plus Spray offers the unique advantage of no-contact application — ideal for maximum hygiene. Compatible with all standard thermal paper types. Produced in Europe, free from toxic ingredients. The quality of the stencil transfer directly impacts the quality of the final tattoo. Artists who invest in premium transfer solutions report more precise line work, fewer corrections, and more confident execution. In professional tattooing, the stencil is the blueprint — and this solution ensures that blueprint remains clear throughout the entire build. Frequently Asked Questions