Înlocuiește autoclava?

Nu. Autoclava rămâne standardul pentru sterilizarea instrumentelor care intră în contact cu pielea lezată, pentru că acționează prin abur sub presiune, inclusiv în zone unde lumina nu ajunge. Sterilizatorul UV este o metodă complementară: excelent pentru igienizarea suplimentară a accesoriilor reutilizabile și pentru păstrarea igienică a instrumentelor deja sterilizate, până la utilizare.

Ce instrumente pot pune în el?

Accesorii reutilizabile care încap în sertare: grip-uri metalice, tuburi, pense, foarfece și alte instrumente similare, inclusiv pentru micropigmentare. Nu are sens să-l folosești pentru consumabile de unică folosință (ace, cartușe, bariere) — acelea se aruncă după fiecare client, nu se reigienizează.

Cât durează un ciclu de igienizare?

Producătorul recomandă un timp minim de acționare de 1 oră, cu sertarele împinse complet până în spate. Dacă deschizi un sertar în timpul funcționării, lampa se oprește automat și repornește la închidere — dar e bine să lași ciclul să se desfășoare neîntrerupt.

La ce folosesc cele două sertare? N-ar fi fost suficient unul?

Cele două sertare separate îți permit să organizezi fluxul de igienizare: într-unul pui instrumentele care urmează să fie expuse la UV, în celălalt le păstrezi pe cele deja curate. Așa separi clar „murdar” de „curat”, reduci riscul de contaminare încrucișată și poți lucra cu două seturi de instrumente în paralel.

Cum întrețin aparatul ca să rămână eficient?

Șterge-l cu o cârpă umedă, fără produse pe bază de acetonă sau alcool. Menține interiorul curat, pentru că suprafețele curate reflectă mai bine lumina UV. Aparatul are un starter înlocuibil — dacă lampa nu mai pornește, acesta e primul suspect; schimbă-l doar cu aparatul oprit și deconectat de la curent. Lămpile UV au și ele o durată de viață limitată, deci înlocuiește-le periodic pentru a păstra eficiența.

Este periculoasă lumina UV pentru mine sau pentru clienți?

În utilizare normală, nu ești expus: lampa funcționează doar cu sertarele complet închise, iar tragerea unui sertar o oprește automat. Regula de bază este să nu privești direct în lampă și să nu forțezi mecanismul de siguranță. LED-ul verde te ajută să știi mereu când aparatul este sub tensiune, iar după utilizare e recomandat să-l oprești de la întrerupătorul principal.

UV sterilizer with 2 drawers

Cod produs: 371183

357,00 Lei-52%

170,00 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Specifications

Dimensions: 35 x 19 x 33 cm
Charging time: 1 hour
Format: 2 drawers
Resistance: 99.9% of germs
Material: Corrosion resistant
Usage: UV-C sterilization

Ghiduri utile:Mobilier și lampă de studio pentru tatuaj Scaunul de tatuat: cum îl alegi pe cel potrivit pentru studio Ergonomia la tatuat: scaun, taburet și braț de lucru fără dureri de spate

Guide & full description

Complete guide: UV sterilizer with 2 drawers

A UV (ultraviolet) sanitization unit with two separate drawers, designed for reusable studio accessories: metal grips, tubes, tweezers, and other tools. It is intended for tattoo artists and micropigmentation technicians who want an organized workflow — one drawer for instruments being sanitized, the other for those already clean. With dimensions of 35 × 19 × 33 cm, it fits easily on a work table or shelf in your station. Important to know from the start: UV light is a complementary sanitization method, not a replacement for the autoclave.

How to use

Pre-clean the instruments of visible residues (ink, petroleum jelly, organic debris) — UV light only acts on surfaces directly exposed, it does not penetrate through dirt.
Place the instruments in the drawers in a single layer, without stacking them, so the light reaches as many surfaces as possible.
Push the drawers fully in to the back — the UV lamp only activates with a proper closure.
Press the power switch; the green LED confirms the unit is powered.
Leave the instruments exposed for a minimum of 1 hour — this is the minimum exposure time recommended by the manufacturer.
If you pull a drawer during operation, the lamp stops automatically; when the drawer is reinserted, it restarts on its own without needing to press the main button again.
After use, turn off the main switch so the unit does not remain powered.

Tips from us

Use the two drawers with fixed roles: one for 'in-progress' instruments, the other for those already sanitized — this avoids cross-contamination and you always know what's clean.
Do not overcrowd the instruments: any area shaded by another object does not receive UV light, so it is not sanitized. Better two cycles than an overloaded drawer.
Keep the interior clean — clean interior surfaces reflect light better and maintain lamp efficiency.
Treat the unit as a link in the hygiene chain, not as the only one: for instruments that come into contact with broken skin, the autoclave remains the standard, and UV is ideal for additional sanitization and hygienic storage of instruments.
If the lamp does not turn on when the drawers are closed, first check the starter — it is a replaceable part. Perform the replacement only with the unit off and unplugged.
Note when you started using the lamp: UV lamps gradually lose efficiency over time, even if they still light up, so it's worth replacing them periodically.

Warning: Clean the unit only with a damp cloth, without substances containing acetone or alcohol — these can damage the surfaces. Before any intervention (e.g., replacing the starter), turn off the unit and unplug it. Do not look directly at the UV lamp and do not attempt to bypass the drawer safety mechanism — the unit is designed to stop the lamp automatically when opened precisely to protect you from direct exposure to UV radiation. Keep in mind: UV sanitization works under normal hygiene and cleanliness conditions — it does not compensate for dirty instruments and does not replace autoclave sterilization for critical instruments.

Frequently asked questions

Does it replace the autoclave?▾

No. The autoclave remains the standard for sterilizing instruments that come into contact with broken skin, because it works through pressurized steam, including in areas where light doesn't reach. The UV sterilizer is a complementary method: excellent for additional sanitization of reusable accessories and for hygienically storing already sterilized instruments until use.

What instruments can I put in it?▾

Reusable accessories that fit in the drawers: metal grips, tubes, tweezers, scissors, and other similar tools, including those for micropigmentation. It doesn't make sense to use it for single-use consumables (needles, cartridges, barriers) — those are disposed of after each client, not re-sanitized.

How long does a sanitization cycle take?▾

The manufacturer recommends a minimum exposure time of 1 hour, with the drawers pushed fully in to the back. If you open a drawer during operation, the lamp automatically turns off and restarts when closed — but it's best to let the cycle run uninterrupted.

What are the two drawers for? Wouldn't one have been enough?▾

The two separate drawers allow you to organize the sanitization flow: in one you put instruments to be exposed to UV, in the other you store those already clean. This clearly separates 'dirty' from 'clean', reduces the risk of cross-contamination, and lets you work with two sets of instruments in parallel.

How do I maintain the unit to keep it efficient?▾

Wipe it with a damp cloth, without acetone-based or alcohol-based products. Keep the interior clean, because clean surfaces reflect UV light better. The unit has a replaceable starter — if the lamp doesn't turn on, that's the first suspect; replace it only with the unit off and unplugged. UV lamps also have a limited lifespan, so replace them periodically to maintain efficiency.

Is UV light dangerous for me or for clients?▾

In normal use, you are not exposed: the lamp only operates with the drawers fully closed, and pulling a drawer stops it automatically. The basic rule is not to look directly at the lamp and not to bypass the safety mechanism. The green LED helps you always know when the unit is powered, and after use it's recommended to turn it off using the main switch.

Product description

UV sterilizer with 2 drawers Double UV sterilizer (ultraviolet lamp), anti-germ, antibacterial, for sterilizing accessories. Sterilizer dimensions: 35 x 19 x 33 cm GENERAL WARNINGS1. Cleaning the sterilizer with ultraviolet is done with a wet cloth, without substances containing acetone or alcohol.2. The sterilizer is provided with a starter, in case it breaks down and needs to be replaced, make sure that the device is turned off and disconnected from the power source.3. The sterilizer corresponds to EU Norms, entered into force on 01.01.1997. HOW TO USE1. Press the switch to start, and the green LED will indicate that the sterilizer is under voltage.2. The drawers of working tools must be pushed well to the back. Only when closed correctly, the UV lamp (ultraviolet lamp) comes into operation.3. This sterilizer guarantees the destruction of germs and bacteria that appear at the workplace, under normal conditions of hygiene and cleanliness. The minimum operating time is 1 hour.4. Pulling a drawer leads to the interruption of the operation of the UV (ultraviolet) lamp, inserting the drawer leads to the reactivation of the UV lamp, without the main start button of the sterilizer being pressed.5. After use, it is recommended to close the main switch, so that the sterilizer does not remain under voltage. The UV Sterilizer with 2 drawers is essential equipment for maintaining hygiene standards in any tattoo studio or micropigmentation salon. Equipped with high-performance UV-C germicidal lamps, this sterilizer eliminates up to 99.9% of bacteria, viruses, and fungi from instruments placed inside. The two separate drawers allow efficient instrument organization, enabling simultaneous sterilization of two different equipment sets or storing already sterilized instruments separately from those being sterilized. Construction from durable corrosion-resistant materials ensures long lifespan, while the reflective interior finish maximizes UV light exposure for uniform sterilization. The intuitive control panel allows sterilization time setting and provides visual operating status indicators. The compact design integrates easily into any professional workspace. Ideal for sterilizing metal grips, tubes, tweezers, and other reusable instruments. UV sterilization is a complementary hygiene method that, used alongside professional autoclaves, ensures maximum safety for clients and artists. Investing in a two-drawer UV sterilizer demonstrates the studio's commitment to the highest hygiene and health protection standards. The dual drawer functionality offers maximum flexibility in sterilization workflow organization. UV-C lamps are strategically positioned to ensure uniform irradiation of all instrument surfaces, and the interior is optimized for maximum germicidal radiation reflection. Frequently Asked Questions How effective is UV sterilization? UV-C sterilization eliminates up to 99.9% of bacteria, viruses, and fungi. It's an excellent complementary method, recommended for use alongside autoclaves for complete instrument hygiene. What instruments can be sterilized in this device? It can sterilize metal grips, tubes, tweezers, scissors, micropigmentation instruments, and other reusable accessories that fit in the sterilizer drawers. What is the advantage of 2 drawers? Two drawers allow separating sterilized instruments from those awaiting sterilization, preventing cross-contamination and improving studio workflow. Does it replace the autoclave? No, the UV sterilizer complements the autoclave, not replaces it. The autoclave remains the gold standard for sterilization. UV is ideal for hygienic storage and additional sterilization. How long does a sterilization cycle take? A UV sterilization cycle generally takes between 15 and 30 minutes, depending on chosen settings and desired sterilization level. Do the UV lamps need replacing? Yes, UV-C lamps have a limited lifespan, usually between 5,000 and 8,000 operating hours. Periodic replacement is recommended to maintain sterilization efficiency. Is it safe for studio use? Yes, the sterilizer is designed with safety systems that turn off UV lamps when drawers are opened, preventing direct UV-C radiation exposure. How is the sterilizer cleaned? The interior is wiped with a soft cloth and non-abrasive disinfectant solution. Reflective surfaces must be kept clean for maximum UV lamp efficiency. Does it consume a lot of electricity? No, UV sterilizers are very energy efficient, typically consuming between 15 and 30W, meaning minimal operating cost compared to the benefits provided. Can I sterilize tattoo cartridges in it? Tattoo cartridges are single-use and should not be reused or sterilized. The UV sterilizer is intended exclusively for reusable metal instruments, after their cleaning and autoclaving.