Complete guide: Adapter cable: 3.5 mm jack plug to banana socket
This is an original Cheyenne connectivity accessory that bridges a 3.5 mm jack plug and a banana connector. It is useful if you want to power a tattoo machine from another manufacturer through a Cheyenne power supply with banana terminals, or if you work with mixed equipment in the studio or at conventions. It is a cable, not a consumable, so you can use it for years if you take care of it; it weighs only about 19 g, making it easy to carry in your kit.
How to use
- Before connecting, set the power supply to zero (minimum voltage) or turn it off to avoid any current spikes.
- Identify the two ends of the cable: the 3.5 mm jack plug and the banana connector.
- Insert the banana connector into the banana binding posts (standard 4 mm diameter) of the power supply or foot pedal.
- Connect the 3.5 mm jack plug into the corresponding port on your equipment.
- Position the cable loosely, without stretching or twisting it, to avoid stressing the connector joints.
- Turn on the power supply and gradually increase the voltage; check that the machine receives stable power without interruptions.
- When finished, disconnect by pulling on the connector body, never on the wire.
Tips from us
- Before buying an adapter, check both ends of the power chain — what connector the power supply output has and what input the machine has — to choose the correct direction.
- Keep a spare adapter in your convention kit; mixed setups often occur when working on someone else's equipment.
- Always disconnect by gripping the connector, not the cable — this protects the internal joints.
- Store the cable loosely coiled, without sharp bends that can fatigue the wire over time.
- If you notice play in the connectors, voltage fluctuations, or exposed wires, remove the cable from use.
Warning: The cable is a reusable accessory, not a sterile consumable, and does not come into direct contact with the client or the tattooed area. Even so, periodically clean its surface with a disinfectant solution and, during the session, protect it with barrier film where you touch it with gloves. Check it before each use for exposed wires, oxidized connectors, or mechanical play; do not use a damaged cable, as it can cause intermittent contact.
Frequently asked questions
How do I know if I need this cable or the reverse version (from banana to jack)?▾
The direction of the connectors matters. Identify what type of connector your power supply output has and what type of input your machine has. This cable has a 3.5 mm jack plug on one end and a banana connector on the other — if your power chain has exactly these two types of connectors at the ends, this is the right cable. Check both ends before ordering.
What power supplies is it compatible with?▾
The banana end fits into any 4 mm banana binding post, which is the standard diameter used on most professional power supplies with exposed terminals. The 3.5 mm jack end connects to equipment that has the corresponding port. If your power supply only has an RCA or clipcord output, you need a different type of adapter cable, not this one.
Is the cable disposable? How do I maintain it?▾
No, it is a reusable accessory with a long lifespan and is not disposable after a session. You periodically disinfect its surface, protect it with barrier film during work, and check it for mechanical damage. With proper care, it works flawlessly for a long time.
Can I use an extension if the power supply is far from the work station?▾
It is not recommended. Each extension adds extra contact points, which can introduce losses or intermittent contact. It is better to reposition the power supply closer to the work station.
What warranty does the product have?▾
The product has a 6-month warranty. According to the manufacturer's information, after a warranty repair, you receive an additional 6 months.
Product description
Adapter cable: 3.5 mm jack plug to banana socket With this adapter cable tattoo machines from other manufacturers can be connected to Cheyenne Power units using banana plugs.
The Cheyenne Adapter Cable from 3.5mm jack to banana plug is the original connectivity accessory that enables the reverse connection — from a machine or source with 3.5mm jack output to equipment with 4mm banana plug input. This adapter completes the Cheyenne connectivity solutions range, addressing artists who need maximum flexibility in studio setup configuration. The 3.5mm jack connector at one end inserts into the corresponding port of Cheyenne equipment, while the banana plug at the other end inserts into the banana terminals of the power supply or foot pedal. Manufactured to the same quality standards as all original Cheyenne accessories — OFC (Oxygen-Free Copper) wiring for maximum conductivity, flexible wear-resistant insulation, and plated connectors for impeccable electrical contact and corrosion resistance. Cable length is calibrated to allow comfortable working distance without excess cable that could cause tangling. Each cable-to-connector junction is mechanically reinforced to withstand repeated pulling and bending. Ideal for artists migrating between ecosystems or attending conventions where setups are mixed. Original Cheyenne product with German quality assurance.
Frequently Asked Questions
