Complete guide: Clipcord RCA INKJECTA
This is a professional clipcord from Inkjecta that connects the tattoo machine to the power supply. It stands out with its 90° angled RCA plug, designed to keep the cable pointing downward, away from the work area, so it doesn't interfere with your hand during tattooing. With a length of 2.5 m, it gives you freedom of movement and allows you to place the power supply further from your work table. It is suitable for any artist using a machine with an RCA connection, regardless of skill level.
How to use
- Make sure the power supply is turned off or set to zero voltage before connecting the cable.
- Insert the 6.3 mm jack plug into the output of the power supply.
- Connect the 90° RCA plug into the RCA port of the tattoo machine, orienting the cable downward, away from your working area.
- Push firmly but without forcing until the connector is securely seated in the port.
- Turn on the power supply and adjust the voltage to your usual working value.
- Arrange the cable with a little slack, without tension on the connector, so it doesn't pull on the machine's port.
- At the end, turn off the power supply and disconnect by pulling the plug, never the cable.
Tips from us
- Always disconnect by gripping the plug, not pulling the cable — this protects both the cable connector and the machine's RCA port.
- Take advantage of the 90° plug: orient it with the cable pointing downward so it doesn't get in your way while working.
- Always leave a little slack in the cable so that hand movements don't put mechanical stress on the connector.
- Keep a spare clipcord in your kit — a loose plug in the middle of a session can ruin your rhythm.
- Avoid sharp bends right at the base of the plug; that's where any cable wears out fastest.
Warning: The clipcord is not disposable, but it enters the work area, so it must be handled hygienically. Cover it with a protective barrier (clipcord sleeve/cover) during the session and disinfect it after each client, paying attention to the areas around the connectors where ink residue can accumulate. Do not insert liquids or spray directly into the plugs and wipe the cable with a damp cloth only, not soaked. Periodically check the integrity of the cable and plugs; a damaged connector or a cable with cracked insulation must be replaced, not used further.
Frequently asked questions
Is it compatible only with Inkjecta machines?▾
No. Although it is made by Inkjecta and fits perfectly with their machines (e.g., Flite Pen, Nano Elite, Ultralite), the cable works with any tattoo machine that has a standard RCA connection, regardless of manufacturer. RCA is a universal connector type, so the only condition is that your machine has an RCA port.
Which end connects where?▾
The RCA plug connects to the RCA port of the tattoo machine, and at the other end, the 6.3 mm jack plug goes into the output of the power supply. If your power supply has a standard 6.3 mm jack input, the cable fits.
Why does it have a 90° plug instead of a straight one?▾
The 90° plug orients the cable perpendicular to the machine, downward and away from the work area. This way the cable doesn't get in your way during tattooing and reduces mechanical stress on the connector, which protects both the cable and the machine's port. For pen-style and rotary machines, this orientation is usually more ergonomic than a straight plug.
How long is the cable?▾
It is 2.5 meters long, a length that gives you generous freedom of movement. You can place the power supply on the table, on a side shelf, or even further away without feeling restricted while working.
How do I clean and maintain it?▾
Wipe the cable with a damp cloth and disinfectant after each session, gently focusing around the connectors where ink residue can accumulate. Do not pour or spray liquid directly into the plugs. While working, it is ideal to use a protective barrier over the cable. Handled with care and disconnected by pulling the plug, a quality clipcord lasts a long time.
What color is it?▾
The version in this listing is black. If you want a different color, check the available options directly on the product page on tatuat.ro — color does not affect the performance or technical specifications of the cable.
Product description
Clipcord RCA Inkjecta2.5m RCA to TS Cable for use with RCA compatible tattoo machines. Comes in Right Angled configurations. This cable is sturdy and thick and should hold up against a regular amount of running over with your chair!
The INKJECTA 90-degree RCA Clipcord is a professional connection cable with a 90-degree angled RCA plug, produced by Inkjecta, one of the most innovative tattoo equipment manufacturers in the world. The 90-degree RCA plug is ergonomically designed to prevent cable interference with the artist's hand movement, keeping the cable oriented downward and away from the work area. This orientation significantly reduces mechanical stress on the machine connector, extending the lifespan of both the cable and the tattoo machine's RCA port. The 2.5-meter length provides generous freedom of movement, allowing comfortable positioning of the power supply away from the work area. The connector at the other end connects to the power supply's 6.3mm jack plug. The RCA connectors used in this cable are individually tested to ensure superior quality and functionality. The cable is compatible with all tattoo machines with RCA connection, including Inkjecta Flite Pen, Nano Elite, and Ultralite machines, as well as machines from other manufacturers. The quality of materials and professional construction ensure a constant current flow without losses or interruptions, essential for optimal tattoo machine performance.
Frequently Asked Questions Why is the RCA plug at 90 degrees? The 90-degree RCA plug orients the cable downward and away from the work area, preventing interference with the artist's hand movement. This reduces mechanical stress on the machine connector, extends the RCA port lifespan, and improves the overall ergonomics of the work setup. Is it only compatible with Inkjecta machines? No, the INKJECTA 90° RCA Clipcord is compatible with any tattoo machine using standard RCA connection, including machines from FK Irons, Bishop, Kwadron, Cheyenne with adapter, and other manufacturers. The plug at the other end connects to power supplies with 6.3mm jack input. How long is the Inkjecta clipcord? The Inkjecta clipcord is 2.5 meters long, providing generous freedom of movement. This length is sufficient to position the power supply on the work table, on a side shelf, or even under the table without restricting the artist's movement during tattooing. What quality are the Inkjecta connectors? The Inkjecta clipcord's RCA connectors are individually tested by the manufacturer to ensure superior quality and functionality. This individual testing guarantees optimal electrical contact, secure connection, and long-term durability, reducing the risk of weak connections or interruptions. Advantages of 90-degree plug vs straight plug? The 90-degree plug orients the cable perpendicular to the machine, preventing hand interference and reducing connector stress. The straight plug orients the cable in line with the machine, which can interfere with the grip. For pen and rotary machines, the 90-degree plug is usually more ergonomic. Who is Inkjecta? Inkjecta is an Australian manufacturer of professional tattoo equipment, internationally recognized for innovation and quality. They are famous for the Flite Nano and Flite X1 machines, considered among the most advanced rotary machines on the market. Their accessories reflect the same high quality standards. Can I use this clipcord with the Kwadron Nemesis power supply? Yes, the INKJECTA 90° RCA Clipcord connects to any power supply with a standard 6.3mm jack input, including Kwadron Nemesis. The jack plug at the power supply end and the RCA plug at the machine end ensure universal connectivity with professional equipment. Does the 90-degree plug deteriorate faster? No, the Inkjecta clipcord's 90-degree plug is structurally reinforced at the bend point and individually tested for durability. In fact, the 90-degree orientation reduces mechanical stress on the connector compared to the straight plug, extending the lifespan of both pieces of equipment. What colors are available for this clipcord? The INKJECTA 90° RCA Clipcord is available in multiple color variants, including black and red. Check color availability on the product page on tatuat.ro. Color does not affect the cable's performance or technical specifications. How is the Inkjecta clipcord cleaned? Wipe the cable with a damp cloth and standard disinfectant after each session. Pay special attention to areas around connectors where ink residue can accumulate. Avoid immersing connectors in liquid and dry the cable before storage.
