Belly piercing 100083 set of 10 mixed pieces

Ghid complet: Belly piercing 100083 set of 10 mixed pieces

Pierce Buric 100083 is a set of 10 navel piercings of the "banana barbell" type, with a bar made of surgical stainless steel 316L and a simple, polished lower ball. The distinctive element is the decorative upper ball, with an image or logo protected under a transparent resin dome — varied models (flags, yin-yang symbols, emoticons, clovers, tribal motifs, etc.), randomly distributed in the set. It suits both those who already have a navel piercing and want to change their look often, as well as piercers who keep a varied stock for clients.

Cum se folosește

1. Check the dimensions against your existing piercing or ask your piercer to confirm: according to the product sheet, the needle is 12G, the bar is 10.4 mm, the small ball is 5 mm in diameter, and the large ball is 8 mm in diameter.
2. Wash your hands thoroughly with soap and water or disinfect them with rubbing alcohol before touching the piercing or jewelry.
3. Disinfect the bar and the lower ball made of 316L steel with 70% isopropyl alcohol or another disinfectant solution before insertion.
4. If replacing the existing jewelry, unscrew the old ball carefully and remove the bar while keeping the piercing stable.
5. Insert the new bar through the channel and screw on the chosen decorative ball, checking that the thread matches and that the ball is firmly attached without any play.
6. Choose the desired piece from the 10 in the set — the designs are randomly mixed, so visually check all pieces before deciding what to wear.
7. Periodically clean the area around the piercing according to your usual routine, without abrasive materials on the image ball.
8. Store unused pieces protected, in a box or bag, to avoid scratches on the resin dome.

Sfaturi de la noi

• Do not autoclave the decorative balls with image under resin — heat can damage them; only the bar and lower ball made of 316L steel withstand autoclaving.
• For daily cleaning, use 70% isopropyl alcohol or cold disinfectant solutions, not abrasive products.
• The balls can be interchanged between bars only if they have the same standard thread — check compatibility before mounting.
• After swimming, especially in saltwater or chlorinated water, rinse with fresh water, especially the decorative ball, to protect the resin.
• Avoid direct contact of the jewelry with sunscreens or abrasive cosmetics.
• 316L steel contains chemically bonded nickel with minimal release — if you have known nickel sensitivity, take this into account when choosing.

Întrebări frecvente