Complete guide: Inkmachines nr. 135 - Motor Assy - 1pcs
This is the complete motor assembly — an original Ink Machines replacement part, marked with number 135 — for the Scorpion X2 rotary tattoo machine. The motor is the component that converts electrical energy into needle movement, so line consistency, shading, and filling directly depend on it. It is intended for artists who maintain their own equipment and for service centers that repair Ink Machines machines, when the original motor has worn out. Delivered as an assembly (motor together with fastening and connecting elements), you replace the entire drive area in one go, not just an isolated component.
How to use
- Before any intervention, turn off the machine and fully disconnect it from the power supply and clip cord.
- Confirm that the motor is indeed the issue: noticeable power loss, excessive noise persisting even after complete maintenance, abnormal vibrations, or overheating. First perform standard cleaning and checks.
- Work on a clean, well-lit, and organized surface, with the official Ink Machines guide at hand.
- Disassemble the housing and remove the old motor assembly following the steps in the guide, noting the order of parts.
- Install the new #135 assembly, reconnect the electrical connections, and fix it firmly without forcing components.
- Reconnect the machine to the power supply and start it at a low voltage, gradually increasing, to check for smooth operation and lack of vibrations.
- Do a short test session (e.g., on synthetic skin) before working on a client, to re-familiarize yourself with the machine's behavior.
Tips from us
- Check the model before ordering: part #135 is for the Scorpion X2. For the Dragonfly X2, the corresponding motor is part #42.
- If you don't have experience disassembling the machine, leave the replacement to a technician or an authorized Ink Machines service center — incorrect mounting can affect other components.
- Correctly adjust the voltage on the power supply: overstressing prematurely wears out any motor.
- Regularly clean the area around the motor to prevent residue buildup and avoid letting the machine run idle for long periods.
- Keep the original packaging and proof of purchase until you confirm everything works correctly after installation.
Warning: Intervention should only be done with the machine disconnected from the power supply. Since it is a mechanical and electrical repair, incorrect installation may damage other parts or affect performance — if you are not sure, contact a technician. Do not force components during installation and strictly follow the official Ink Machines guide. After replacement, test the machine before working on a client. During tattooing, protect the machine with barrier film and a clip cord cover: the motor is a reusable part, not a sterile consumable, so the barrier is what maintains hygiene in the work area.
Frequently asked questions
How do I know when to replace the motor?▾
Typical signs are noticeable loss of power, excessive noise that persists even after a complete maintenance, abnormal vibrations, rapid overheating, or inconsistent operation at the speed setting. A healthy motor runs quietly and delivers consistent power. If these symptoms appear and don't resolve with regular cleaning and checks, replacement is justified.
Can I mount the motor myself or do I need service?▾
Replacement is possible for an experienced user, but it is recommended to contact an authorized Ink Machines service center or a skilled tattoo machine repair technician. Incorrect installation can damage other components. If you choose to install it yourself, strictly follow the official guide and work with the machine disconnected from the power supply.
Does it fit other Ink Machines machines?▾
No. The #135 assembly is designed for the Scorpion X2 machine. Each Ink Machines model uses a motor adapted to its construction — for the Dragonfly X2, for example, the motor is part #42. Check your machine model before ordering to avoid an incompatible part.
What does the #135 motor assembly include?▾
This is a complete replacement solution: it includes the motor along with the fastening and connecting elements. This way you don't have to buy other parts separately for the drive area — you replace the entire assembly in one go.
Does the new motor need break-in?▾
The original motor is tested and calibrated at the factory, so it doesn't require a proper break-in period. However, it is recommended to do a short test session after installation, gradually increasing the voltage, to confirm proper operation and familiarize yourself with the machine's behavior before working on a client.
How do I maintain the motor to make it last as long as possible?▾
Correctly adjust the voltage to avoid overloading the motor, regularly clean the area around it to prevent residue buildup, do not let the machine run idle for long periods, and store it in proper conditions. During work, use barrier film on the machine and a clip cord cover — hygiene is maintained through disposable barriers, not by internal motor cleaning.
Product description
Inkmachines nr. 135 - Motor Assy
Complete motor assembly for InkMachines Scorpion X2 tattoo machine, original spare part no. 135, 1 piece. The motor is the heart of the Scorpion X2 machine, the component responsible for converting electrical energy into precise tattoo needle movement. This original InkMachines motor assembly is manufactured to the highest standards of Swedish engineering, delivering an exceptional power-to-weight ratio and extremely quiet operation. The motor delivers consistent torque across the entire speed range, ensuring uniform skin penetration regardless of tattooing style - from fine lines to dense fills and complex shading. The assembly includes the motor, mounting components, and connection elements, representing a complete replacement solution. The Scorpion X2 is recognized for its versatility, allowing conversion between Neo cartridges with magnetic non-contact system and standard cartridges in just 5 minutes. Motor replacement is necessary when significant power loss is detected, excessive noise that cannot be remedied through regular maintenance, or abnormal vibrations. We recommend motor replacement by an experienced technician or in accordance with the official InkMachines guide. Original part with performance guaranteed by the Swedish manufacturer. Motor quality directly reflects in every line drawn and every fill completed. InkMachines invests significant resources in developing and testing motors to guarantee long-term professional performance. Available on tatuat.ro with fast delivery throughout Romania.
Frequently Asked Questions When should the Scorpion X2 motor be replaced? The motor should be replaced when significant power loss is observed, excessive noise persists even after complete maintenance, abnormal vibrations occur, or inconsistent operation is detected. Also, if the motor overheats quickly or no longer responds to speed adjustments, replacement is necessary. A motor in good condition operates quietly and delivers constant power. Can I replace the motor myself or should I use a service center? While motor replacement is possible by an experienced user, we recommend using an authorized InkMachines service center or a technician experienced in tattoo machine repair. Incorrect installation can damage other components or affect machine performance. If you opt for self-replacement, strictly follow the official guide. What does the motor assembly no. 135 include? Motor assembly no. 135 includes the complete motor, all necessary mounting components, and electrical connection elements. It is a complete replacement solution that does not require separate purchase of other parts. All components are pre-assembled and factory-tested to guarantee correct operation. How much does the Scorpion X2 motor cost? The original InkMachines motor assembly no. 135 is available at approximately 145 EUR. While it is one of the more expensive spare parts, investing in an original motor guarantees machine performance and durability. Non-original motors may be cheaper but compromise tattoo quality. What is the lifespan of the Scorpion X2 motor? Motor lifespan depends on usage intensity and maintenance quality. For normal professional use with regular maintenance, the motor can operate for years without issues. Factors that reduce lifespan include overloading, lack of maintenance, and use at inappropriate voltages. Is motor no. 135 compatible with other InkMachines machines? No, motor no. 135 is designed exclusively for the Scorpion X2 tattoo machine. Each InkMachines model uses a specific motor adapted to its design and mechanical requirements. For the Dragonfly X2, the corresponding motor is part no. 42. Do not attempt to install an incompatible motor. What difference does an original motor make versus a compatible one? The original InkMachines motor is manufactured to exact specifications, with premium materials and rigorous quality control. Compatible motors may have wider tolerances, inferior materials, and inconsistent performance. Differences manifest in speed stability, noise level, heat generation, and lifespan. Does the new motor need a break-in period? The original InkMachines motor is factory-tested and calibrated, so it does not require a proper break-in period. However, we recommend a short testing session after installation to verify correct operation and familiarize yourself with the new motor's characteristics before working on clients. How do I maintain the motor to maximize lifespan? To maximize motor lifespan: avoid overloading by correctly adjusting voltage, regularly clean the area around the motor to prevent residue accumulation, do not let the machine run without load for extended periods, and store the machine in appropriate temperature and humidity conditions. What warranty does InkMachines offer for the replacement motor? The original InkMachines replacement motor comes with warranty against manufacturing defects. The warranty is valid only for parts purchased from authorized distributors and installed according to manufacturer instructions. Contact tatuat.ro for specific details regarding warranty conditions and return procedures.
