Complete guide: Inkmachines nr. 18 - Adjustment screw - 1pcs
Adjustment screw no. 18 is the original InkMachines spare part, manufactured in Sweden, which allows you to fine-tune the mechanism of the Dragonfly X2 rotary machine. It is made of stainless steel, with precision thread, and is sold individually. It is intended for artists who want to keep the machine at optimal parameters or replace a worn or damaged screw.
How to use
- Turn off and disconnect the machine from power before any intervention.
- Pull off the cap to access the adjustment screw.
- Remove the old or worn screw with a precision screwdriver of the appropriate size.
- Mount the new adjustment screw no. 18 in place, engaging the thread correctly without forcing.
- Put a little oil on the hexagon before pushing the cap back into place.
- Push the cap back until it is fully seated.
- Check the adjustment and operation on a test surface before working on skin.
Tips from us
- Always keep a spare screw — it's a small part but essential for the machine's adjustability.
- Use a precision screwdriver exactly the size of the head, otherwise you risk damaging the screw and being unable to adjust it.
- A drop of oil on the hexagon makes reassembling the cap easier and protects the mechanism.
- Periodically check the screw's tightness and adjustment as part of routine maintenance, especially after heavy use.
- Choose the original InkMachines part for a correct thread fit and avoid generic screws that may play or wear out quickly.
Warning: Always work with the machine turned off and disconnected. Keep the machine body clean and use barrier film during the tattoo session to avoid contaminating the mechanism. Do not confuse this screw with the main stroke adjustment: the needle stroke on the Dragonfly X2 is given by the eccentric assembly (part no. 41B), available in SHORT 2.6 mm, STANDARD 3.7 mm, and LONG 4.5 mm variants — the adjustment screw only makes fine adjustments. Do not force the screw head with an unsuitable screwdriver.
Frequently asked questions
Does it fit my machine?▾
Adjustment screw no. 18 is designed for Dragonfly models, including the X2 version. InkMachines has maintained cross-generation compatibility for many components, but if you have an older version, we recommend confirming compatibility with your exact machine version before ordering. You can write to us and we'll help.
What does this screw actually adjust?▾
It allows fine adjustment of the mechanical parameters of the Dragonfly X2 machine. The main needle stroke does not come from it, but from the eccentric assembly (part no. 41B), available in 2.6 mm, 3.7 mm, and 4.5 mm variants; the adjustment screw complements this setting with subtle adjustments tailored to your style.
How do I know when to replace it?▾
Clear signs are: you can no longer maintain the adjustment (the screw moves on its own), the thread is visibly worn, or the screw head is damaged and can no longer be gripped by the screwdriver. At the first signs of wear, replace it — a functional screw is essential for precise control.
What screwdriver do I need?▾
A precision screwdriver of the correct head size. An unsuitable tool can damage the screw head and make further adjustment impossible, so a quality set of precision screwdrivers for tattoo machine maintenance is worth it.
How do I properly maintain the screw and machine?▾
Always work with the machine turned off and disconnected, keep the machine body clean, and use barrier film during work to avoid contaminating the mechanism. Put a little oil on the hexagon when reassembling the cap and periodically check the tightness as part of your maintenance routine.
Can it come loose due to vibrations?▾
The original InkMachines screw has a thread designed to resist self-loosening caused by vibrations. After prolonged use, a worn thread may allow loosening, so check the tightness from time to time and replace the part at the first signs of wear.
Product description
Inkmachines nr. 18 - Adjustment screw Hint! To replace the adjustment screw just pull the cap off and exchange. Put a little bit of oil on the hexagon before you push the cap back on.
Adjustment screw for InkMachines Dragonfly X2 tattoo machine, original spare part no. 18, 1 piece. The adjustment screw is a fundamental component that allows fine-tuning of the Dragonfly X2 mechanical parameters, giving the tattoo artist precise control over equipment performance. This part enables optimal calibration of needle stroke and mechanism tension, adapting the machine to different tattoo styles and personal preferences. Manufactured from superior quality stainless steel with precision threading, the adjustment screw offers micrometric adjustment without play or imprecision. The fine thread allows subtle setting modifications with excellent resolution. The InkMachines Dragonfly X2 is a legendary rotary tattoo machine, valued by professional artists worldwide for its reliability, versatility, and consistent performance. Available with three preset stroke options (2.6mm, 3.7mm, and 4.5mm), the Dragonfly X2 covers all tattoo styles. The adjustment screw should be replaced when the thread is worn and no longer allows precise adjustment or when the screw head is damaged. Original InkMachines part, manufactured in Sweden with the highest level of engineering precision. The Dragonfly X2 is one of the best-selling rotary tattoo machines in the world, and the adjustment screw contributes to the versatility that made it legendary. The original InkMachines part is available on tatuat.ro with fast delivery in Romania and Swedish manufacturer guarantee. The Dragonfly X2 is one of the most acclaimed rotary machines globally, and proper maintenance ensures its legendary performance continues.
Frequently Asked Questions What does adjustment screw no. 18 adjust on the Dragonfly X2? Adjustment screw no. 18 allows fine-tuning of the Dragonfly X2 mechanical parameters, including needle stroke calibration and mechanism tension. This adjustment enables machine adaptation to different tattoo styles and individual preferences of each tattoo artist. How much does adjustment screw no. 18 cost? InkMachines adjustment screw no. 18 is available at approximately 2 EUR. It is an affordable but important spare part for maintaining the Dragonfly X2 adjustment capability. We recommend keeping a spare screw for emergency situations. Is the adjustment screw compatible with Dragonfly X2 and older versions? Adjustment screw no. 18 is designed for Dragonfly models, including the X2 version. Verify compatibility with your specific machine version by contacting authorized distributor tatuat.ro. InkMachines has maintained cross-generation compatibility for many components, but confirmation is recommended. How do I know the adjustment screw needs replacing? Signs indicating the need for replacement include: inability to maintain settings (screw moves on its own), visibly worn threading, damaged screw head that no longer allows screwdriver grip, or inability to achieve the necessary fine adjustment. A functional adjustment screw is essential for machine performance. What screwdriver do I need for the adjustment screw? InkMachines adjustment screw no. 18 requires a precision screwdriver with the appropriate size. Using an improper screwdriver can damage the screw head, making subsequent adjustment impossible. We recommend using a quality precision screwdriver set for tattoo machine maintenance. Can I adjust the Dragonfly X2 machine without the adjustment screw? No, the adjustment screw is essential for fine-tuning the Dragonfly X2 machine. Without a functional adjustment screw, the machine will only operate at factory-preset parameters without customization possibility. This significantly limits machine versatility and the artist's ability to adapt it to specific needs. Does the adjustment screw affect needle stroke? The adjustment screw allows fine calibration of mechanical parameters, but the main needle stroke on the Dragonfly X2 is determined by the eccentric assembly (part no. 41B) available in three variants: SHORT 2.6mm, STANDARD 3.7mm, and LONG 4.5mm. The adjustment screw complements this setting with subtle adjustments. Can the adjustment screw loosen due to vibrations? The original InkMachines adjustment screw is designed with threading that resists vibration-induced self-loosening. However, after prolonged use, worn threading may allow loosening. Periodically check screw tightening and adjustment as part of routine maintenance. Replace at the first signs of wear. Is the Dragonfly X2 a good machine for beginners? The Dragonfly X2 is an excellent machine for both beginners and experienced professionals. Its versatility with three stroke options (2.6mm, 3.7mm, 4.5mm), light weight, and quiet operation make it ideal for learning. The adjustment screw allows fine adjustments as the artist develops their style and preferences. What other Dragonfly X2 spare parts should I have on hand? In addition to adjustment screw no. 18, we recommend stocking: inner piston spring (no. 19), noise reduction O-ring (no. 22), connecting pin (no. 23), stay up spring (no. 24), and circlip (no. 25). These wear parts ensure continuous Dragonfly X2 machine operation.
