Complete guide: Inkmachines nr. 143 - Slide Screw (2 buc)
This set contains two original InkMachines slide screws (replacement part no. 143), intended for the InkMachines Scorpion X2 tattoo machine. The slide screws are part of the machine's sliding mechanism and allow adjustment and fixation of the position of moving parts. Being wear components, a spare set is useful for any artist working on the Scorpion X2 who wants to keep the machine at optimal parameters.
How to use
- Stop and disconnect the tattoo machine before any intervention and work on a clean, well-lit surface.
- Locate the slide screws in the Scorpion X2's sliding mechanism, following the diagram and manufacturer's guide for your model.
- Carefully loosen and remove the old screws using a precision screwdriver that fits exactly into the screw head.
- Clean the housing of any debris or old lubricant residue before installation.
- Install the two new screws and tighten them evenly and symmetrically, in small steps.
- Adjust gradually, checking the mechanism's movement after each adjustment, so that there is neither play nor binding.
- Perform a final check of the tightness and proper operation of the sliding parts before putting the machine back into use.
- Sanitize the external surfaces of the machine before reuse, according to your usual protocol.
Tips from us
- Replace both screws simultaneously, even if only one appears worn, to maintain the mechanical balance of the movement.
- Use a precision screwdriver that fits perfectly into the head to avoid damaging the screw when tightening.
- Avoid both excessive tightening (which can lock the mechanism) and insufficient tightening (which leaves play).
- A minimal lubrication with specific tattoo machine oil can ease adjustment and prevent corrosion; avoid excess, which attracts dust into the mechanism.
- Periodically check the tightness of the screws as part of routine maintenance.
- Keep a spare set in your kit for quick replacements between sessions.
Warning: Always stop and disconnect the machine before working on the mechanism. As this is a tattoo machine used near the work area, follow your hygiene protocol: disinfect external surfaces and use protective barriers on the machine during the session. Do not exceed the manufacturer's recommendations when tightening and do not improvise with uncalibrated parts.
Frequently asked questions
Which machine are these screws compatible with?▾
Slide screws no. 143 are original replacement parts for the InkMachines Scorpion X2 tattoo machine. According to the manufacturer's data, they are the same regardless of whether the machine is configured for Neo cartridges (magnetic system, contactless) or standard cartridges, so a single set covers both configurations.
How many screws are in the set?▾
The set contains 2 slide screws, exactly the quantity needed for a complete replacement. It is recommended to replace both at the same time to maintain the balance and uniformity of the sliding mechanism.
Can I use generic screws from another manufacturer?▾
It is not recommended. Original slide screws have threads and dimensions calibrated for the Scorpion X2 machine's tolerances. Generic parts may have different threads or imprecise dimensions, which affects the adjustment and proper fixation of the mechanism.
How do I know when the screws need to be replaced?▾
Typical signs of wear are: screws loosen on their own and no longer hold adjustment, the thread appears visually damaged, the screw head is worn and can no longer be gripped properly with a screwdriver, or you can no longer achieve precise adjustment. In these cases, replacement with new original parts is the solution.
Do the screws require lubrication or other maintenance?▾
A light lubrication with specific tattoo machine oil, applied in minimal quantity to the thread, can facilitate adjustment and prevent corrosion. Avoid lubricants that attract dust or impurities into the sliding mechanism. Otherwise, maintenance involves periodic checking of tightness.
What screwdriver do I need for installation?▾
You need a precision screwdriver whose tip fits exactly into the screw head to avoid damaging it when tightening. The product data does not indicate an exact size, so physically check the screw or consult the InkMachines guide for your machine.
Product description
Inkmachines nr. 143 - Slide Screw (2 buc)Includes 2pcs
Slide screw for InkMachines Scorpion X2 tattoo machine, original spare part no. 143, set of 2 pieces. Slide screws are precision mechanical components that allow adjustment and fixation of the sliding elements' position in the Scorpion X2 mechanism. These adjustment screws ensure controlled movement of moving parts on the correct trajectory, contributing to the precision and repeatability of tattoo needle movement. Manufactured from superior quality stainless steel with precision threading, slide screws provide secure fixation without risk of self-loosening due to vibrations. The fine thread allows micrometric adjustments, giving the tattoo artist maximum control over the mechanism configuration. The InkMachines Scorpion X2 is a versatile professional tattoo machine that can be configured for both Neo cartridges with magnetic non-contact system and standard cartridges, with a conversion time of just 5 minutes. Slide screws are wear components that should be periodically checked and replaced when the thread shows signs of deterioration or when they no longer allow precise adjustment. The set contains 2 screws per manufacturer specifications. Original InkMachines part with guaranteed quality. Precise control of the sliding mechanism is essential for professional performance. InkMachines designs every screw with attention to detail, from thread quality to manufacturing material. The original slide screw set is available on tatuat.ro with fast delivery in Romania. These precision-machined screws demonstrate InkMachines commitment to quality in every component of their professional machines.
Frequently Asked Questions What function do slide screws no. 143 serve in the Scorpion X2? Slide screws allow adjustment and fixation of sliding element positions in the Scorpion X2 drive mechanism. They control the trajectory and amplitude of movement, ensuring precision and repeatability of each needle stroke. Correct slide screw adjustment directly contributes to tattoo quality. Why are there 2 slide screws in the set? The Scorpion X2 machine uses 2 slide screws that work symmetrically to ensure balanced and uniform fixation of sliding elements. The set contains the exact quantity needed for a complete replacement. We recommend replacing both screws simultaneously to maintain mechanical balance. How do I correctly adjust the slide screws? Slide screw adjustment is done with a precision screwdriver in small, controlled steps. Tighten both screws evenly, checking mechanism operation after each adjustment. Avoid over-tightening which can lock the mechanism and under-tightening which allows play. Consult the InkMachines guide for optimal adjustment. Can slide screws self-loosen due to vibrations? Original InkMachines slide screws have threading designed to resist vibration-induced self-loosening. However, after prolonged use or if the thread is worn, there is a loosening risk. Periodic tightening checks are part of routine maintenance. Replace screws if you notice a tendency to self-loosen. How much does the slide screw set no. 143 cost? The set of 2 InkMachines slide screws no. 143 is available at approximately 0.50 EUR. This makes preventive replacement extremely accessible. The negligible cost of spare parts does not justify the risk of using worn screws that can affect tattoo machine precision. Do slide screws need lubrication? Light lubrication of slide screws can facilitate adjustment and prevent corrosion. Use tattoo machine-specific oil applied in minimal quantity on the screw threads. Avoid lubricants that can attract dust or impurities into the sliding mechanism, as these can cause accelerated wear. Can I use screws from another manufacturer? We do not recommend using screws from other manufacturers. Slide screws no. 143 have a specific thread with pitch and dimensions calibrated for the Scorpion X2 tolerances. Generic screws may have different threading, inferior material, or imprecise dimensions, affecting correct mechanism adjustment and fixation. When do I know slide screws are worn? Signs of wear include: difficulty maintaining adjustment (screws loosen on their own), visibly deteriorated threading, worn screw head that no longer allows screwdriver grip, or inability to achieve precise adjustment. In these cases, replacement with new original screws is necessary. Are slide screws the same for Neo and standard versions? Yes, slide screws no. 143 are the same regardless of whether the Scorpion X2 machine is configured for Neo cartridges or standard cartridges. These are structural mechanism components that do not differ between the two configurations. A single set is compatible with both variants. What screwdriver do I need for the slide screws? InkMachines slide screws no. 143 require a precision screwdriver with the appropriate size and type. Using an improper screwdriver can damage the screw head, making subsequent adjustment or removal impossible. Check InkMachines specifications for the exact screwdriver size needed.
