Complete guide: Inkmachines nr. 25 - Circlip - 1pcs
The retaining ring (circlip) is an original InkMachines spare part, marked with reference number 25 and sold individually. Although it is one of the smallest components, its role is to axially fix parts on the shaft or in the bore, ensuring nothing shifts laterally during operation. It is made of spring steel with controlled elasticity and is intended for artists and technicians who maintain their own Dragonfly machine and want a spare part at the manufacturer's standard.
How to use
- Stop and disconnect the machine, then disassemble it until you reach the area where the circlip is installed, following the InkMachines component diagram.
- Prepare a retaining ring pliers of the appropriate size. InkMachines recommends ring pliers No. 55 for this part.
- Adjust the pliers opening so that you open the ring just enough to release the seat, without overstretching it; excessive stretching permanently deforms the circlip and renders it unusable.
- Carefully remove the old circlip and inspect it; clean any debris from the groove (channel) where it sits.
- Position the new circlip in the corresponding groove and release it controllably from the pliers so that it seats completely in the seat.
- Visually and tactilely check that the ring is perfectly round, evenly seated, and firmly retains the component.
- Reassemble the machine and test it dry before starting work.
Tips from us
- Buy several spare pieces; this is a very small part, easy to lose during assembly, and it's useful to always have one on hand.
- Use a quality circlip pliers; unsuitable tools can deform the ring or launch it forcefully.
- Work on a clean, light-colored surface, ideally over a tray or container, as small rings tend to jump easily.
- Do not reuse a ring that has lost its elasticity or appears deformed; the retaining force decreases with each installation and removal.
- Consult the InkMachines component diagram before assembly to ensure you place the ring in the correct position.
Warning: Wear eye protection during installation and removal; a circlip can spring out forcefully if it slips from the pliers. Do not stretch the ring more than necessary; if you deform it, it loses its retaining force. A worn circlip that no longer holds firmly can allow components to shift during operation, so replace it at the first sign of loosening, cracking, or deformation.
Frequently asked questions
Which machine is this circlip for?▾
This is the original InkMachines spare part No. 25, intended for the mechanism of Dragonfly machines, with the X2 version explicitly mentioned. Since the same reference may appear in multiple positions on a machine, check the part number on your model's component diagram before ordering.
What tools do I need to install it?▾
You need a retaining ring (circlip) pliers of the appropriate size. InkMachines recommends ring pliers No. 55 for replacing this part; it is a separate purchase but essential for safe assembly.
Can I reuse the old circlip after removal?▾
Sometimes yes, if it shows no deformation or loss of elasticity. However, each installation and removal stresses the ring and reduces its retaining force, so the safe option is to install a new part with each reassembly, which is why it's worth having a few spares.
Will a generic circlip from the hardware store work?▾
It is not recommended. The dimensions and material of a generic ring may differ from InkMachines specifications, and a slightly different diameter or thickness will not ensure proper retention. The risk of damaging the mechanism does not justify the minimal savings.
How can I tell if it needs to be replaced?▾
Inspect it visually: a good ring is perfectly round, with uniform thickness, and returns to shape after compression. If it is deformed, cracked, flattened, or no longer firmly retains the component, replace it. When disassembling, also clean the groove where it sits so the new ring seats correctly.
What happens if I use the machine with a worn circlip?▾
A circlip that no longer retains can allow components to shift during operation, leading to imprecise needle movement, additional wear on the mechanism, or even jamming. It is a small part, but preventive replacement protects your machine.
Product description
Inkmachines nr. 25 - Circlip Note that you will also need the No. 55 - Circlip pliers to replace this part. Hint! Make sure to adjust the Circlip pliers gap so that it does not over stretch the Circlip or the Circlip will become useless. It should open just enougt so that the Circlip clears the pin.
Circlip for InkMachines Dragonfly X2 tattoo machine, original spare part no. 25, 1 piece. The circlip is an elastic retaining ring used for axial fixation of components on shafts or in bores within the Dragonfly X2 machine mechanism. This small but vital part prevents lateral displacement of critical components, ensuring each element remains in the correct position during operation. Manufactured from superior quality spring steel with controlled elasticity, the circlip maintains constant retention force even after repeated installations and removals. Elastic fatigue resistance is essential for the long-term reliability of this component. InkMachines uses precision circlips manufactured to tight tolerances, as any play in axial fixation propagates through the mechanism and affects needle movement precision. The Dragonfly X2 is a professional tattoo machine where every component, regardless of size, contributes to overall performance. The circlip should be replaced when it loses elasticity, deforms, or no longer firmly retains components. Using worn circlips presents the risk of part displacement during operation. Original InkMachines part at an extremely accessible price. Attention to every detail regardless of size is what defines InkMachines quality. Circlip no. 25, although one of the smallest parts, plays an essential role in the machine's mechanical integrity. Available on tatuat.ro, the authorized InkMachines distributor in Romania, with fast delivery. Even the smallest components deserve the same quality standards as the largest assemblies in professional tattoo equipment.
Frequently Asked Questions What does circlip no. 25 fix in the Dragonfly X2 machine? Circlip no. 25 provides axial fixation of components on shafts or in bores within the Dragonfly X2 drive mechanism. It prevents lateral displacement of critical parts, maintaining correct alignment and positioning of the entire mechanism during operation. How much does circlip no. 25 cost? InkMachines circlip no. 25 is available at approximately 0.50 EUR, making it one of the most affordable spare parts. The minimal cost makes preventive replacement an obvious decision. We recommend purchasing multiple spare circlips to always have parts available. Can the circlip be reused after removal? Circlips can be reused if they show no signs of deformation or elasticity loss after removal. However, each installation-removal cycle subjects the circlip to stress that can reduce retention force. At 0.50 EUR, we recommend using a new circlip for each reassembly. What tools do I need to install the circlip? Circlip pliers of the appropriate size are needed for circlip installation and removal. Using improper tools can deform the circlip or cause it to fly off, creating an accident risk. Invest in a quality circlip plier set for safe tattoo machine maintenance. Can a worn circlip cause serious problems? Yes, a worn circlip that no longer retains correctly can allow component displacement during operation, potentially causing mechanism damage, imprecise needle movement, or even machine jamming. Circlip inspection and preventive replacement are simple measures with major impact on reliability. Is the circlip the same for all Dragonfly versions? Circlip no. 25 is specified for Dragonfly models, including the X2 version. Verify compatibility with your specific machine version if you have an older model. InkMachines maintains cross-generation compatibility for many standard components. Will a generic circlip from a hardware store work? We do not recommend generic circlips because dimensions and material may differ from InkMachines specifications. A circlip with slightly different diameter or thickness will not ensure correct retention. Although a generic circlip price is similar, the risk of machine damage is not worth the minimal savings. How many circlips does the Dragonfly X2 have? The Dragonfly X2 machine uses circlips in multiple mechanism positions. Part no. 25 refers to the specific circlip in the InkMachines component diagram. Consult the complete diagram to identify all circlips and their reference numbers. Each circlip may have different dimensions. How do I check the circlip condition? Visually inspect the circlip for deformation, loss of roundness, cracks, or thickness reduction. A circlip in good condition should be perfectly round, have uniform thickness, and return to its initial shape after compression. If the circlip appears deformed or weakened, replace it. Can I lose the circlip during disassembly? Yes, circlips are small elastic parts that can fly off during removal if proper tools and technique are not used. Work on a clean, enclosed surface to easily find the circlip if it escapes. Always have spare parts on hand.
