Cu ce mașină este compatibilă această piesă?

Este ansamblul eccentric X2 pentru mașina rotativă Dragonfly de la Ink Machines. Conform producătorului se potrivește mașinilor Dragonfly, fiind versiunea destinată modelului Dragonfly X2. Dacă nu ești sigur ce excentric ai montat, verifică modelul mașinii tale înainte de comandă.

Ce cursă are și pentru ce stiluri este potrivită?

Vine pre-setată la cursa STANDARD de 3,7 mm, configurația universală: potrivită pentru lining, shading, color packing și lucru general. Este alegerea recomandată ca punct de plecare pentru majoritatea stilurilor.

Pot regla cursa după ce o montez?

Da. Deși vine pre-setată la 3,7 mm, cursa poate fi ajustată între 2,6 și 4,5 mm folosind trusa de scule de precizie Nr. 90 (comercializată separat).

De ce scule am nevoie pentru montaj?

Pentru înlocuire ai nevoie de cleștele pentru inele Nr. 55 (ca să scoți inelul și să împingi știftul de conectare) și de cea mai mică cheie hexagonală, de 0,9 mm, pentru șurubul de pe arborele motorului. Aceste scule nu sunt incluse cu piesa.

Cum întrețin corect această componentă?

Fiind o piesă mecanică internă, ține-o curată și fără reziduuri, monteaz-o cu mașina oprită și nu strânge excesiv șurubul. După montaj verifică mereu alinierea bielei cu canelura din piston și pornește mașina scurt în gol înainte de a tatua.

Dacă am nevoie de un singur excentric, pe acesta să îl aleg?

Da, varianta STANDARD de 3,7 mm este cea mai versatilă opțiune ca unic excentric, pentru că acoperă lining, shading și umplere. Pentru specializare pe linii fine sau pe packing foarte agresiv poți completa ulterior cu o cursă mai scurtă, respectiv mai lungă.

Inkmachines nr. 41B - X2 Eccenter assy (Preset STANDARD 3.7MM) - 1pcs

Ink Machines

Cod produs: 375581

217,00 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Specifications

Brand: Ink Machines
Packaging: 1 pc
Stroke: 3.7 mm
Compatibility: Dragonfly X2
Quantity: 1 pc
Material: Original InkMachines
Adjustment: 2.6-4.5 mm
Motor Type: Eccentric

Ghiduri utile:Piese de schimb Ink Machines — Dragonfly, Stingray, Scorpion, Cobra: ghid InkMachines — mașini suedeze și piese de schimb (Dragonfly, Scorpion, Stingray, Cobra)Întreținerea mașinii de tatuat: piesele de schimb esențiale

Guide & full description

Complete guide: Inkmachines nr. 41B - X2 Eccenter assy (Preset STANDARD 3.7MM) - 1pcs

This is the replacement eccentric assembly for the Dragonfly rotary machine by Ink Machines, X2 version, delivered pre-set at the STANDARD stroke of 3.7 mm. The original part No. 41B is the component that converts the motor's rotation into the linear movement of the needle, so it directly affects how the machine works. It is intended for artists who maintain their own equipment and want either to replace a worn eccentric or to return to a versatile stroke suitable for most styles.

How to use

Turn off and disconnect the machine, then prepare the necessary tools for installation: Ring Pliers No. 55 and the smallest hex key, 0.9 mm (these are not included with the part).
Using the Ring Pliers No. 55, remove the retaining ring and push out the connecting pin.
Loosen the old eccentric from the motor shaft with the 0.9 mm hex key. On the standard eccentric, there are two screws (one for the motor shaft, one for the bearing shaft) - use only the one for the motor shaft.
Mount the new assembly onto the motor shaft, ensuring the screw reaches the flat part of the shaft, then tighten it securely.
Check if the connecting rod aligns correctly with the piston groove. Alignment is essential: if it does not fit, the machine will not function properly and you may need to readjust the motor position (consult the manual or send the part to service).
If everything is aligned, fit the upper bearing with the piston hole, insert the connecting pin, and put the ring back in place.
Before tattooing, briefly run the machine without load and check that it runs smoothly and without abnormal play.

Tips from us

The STANDARD 3.7 mm stroke is the universal configuration recommended by InkMachines: it covers lining, shading, color packing, and general work well, being a compromise between the fine 2.6 mm stroke and the aggressive 4.5 mm stroke.
If you want a different behavior, the stroke can be adjusted between 2.6 and 4.5 mm with the Precision Tool Kit No. 90.
For ultra-fine lines or dotwork, a shorter stroke is more precise, and for intense packing, a longer stroke gives more power; keep 3.7 mm as a versatile baseline setting.
During installation, do not force or overtighten the screw - it is important that it catches on the flat part of the motor shaft.
Keep small parts (the ring and connecting pin) handy and safe during the operation to avoid losing them.

Warning: This is an internal mechanical part, not a consumable. Always work with the machine off and disconnected, use only the screw intended for the motor shaft, and check the alignment of the connecting rod with the piston before use - incorrect alignment can prevent proper operation. Ring Pliers No. 55 and Precision Tool Kit No. 90 are separate tools, required for replacement and adjustment respectively.

Frequently asked questions

Which machine is this part compatible with?▾

This is the X2 eccentric assembly for the Dragonfly rotary machine by Ink Machines. According to the manufacturer, it fits Dragonfly machines, being the version intended for the Dragonfly X2 model. If you are unsure which eccentric you have installed, check your machine model before ordering.

What stroke does it have and what styles is it suitable for?▾

It comes pre-set at the STANDARD stroke of 3.7 mm, the universal configuration: suitable for lining, shading, color packing, and general work. It is the recommended starting choice for most styles.

Can I adjust the stroke after installing it?▾

Yes. Although it comes pre-set at 3.7 mm, the stroke can be adjusted between 2.6 and 4.5 mm using the Precision Tool Kit No. 90 (sold separately).

What tools do I need for installation?▾

For replacement, you need the Ring Pliers No. 55 (to remove the ring and push out the connecting pin) and the smallest hex key, 0.9 mm, for the screw on the motor shaft. These tools are not included with the part.

How do I properly maintain this component?▾

Being an internal mechanical part, keep it clean and free of residue, install it with the machine off, and do not overtighten the screw. After installation, always check the alignment of the connecting rod with the piston groove and run the machine briefly without load before tattooing.

If I need only one eccentric, should I choose this one?▾

Yes, the STANDARD 3.7 mm version is the most versatile option as a single eccentric, because it covers lining, shading, and filling. For specialization in fine lines or very aggressive packing, you can later complement it with a shorter or longer stroke respectively.

Product description

Inkmachines nr. 41B - X2 Eccenter assy (Preset STANDARD 3.7MM) Fits all Dragonfly machines. Pre-set to Standard stroke 3.7mm Can also be adjusted with the No.90 Precision tool kit From 2.6 - 4.5mm Note that you will also need the No. 55 - Circlip pliers to replace this assembly. Hint! Use the Circlip Pliers to remove the Circlip and push out the Connecting pin. Loosen the excenter from the motor shaft with the smallest allen key 0.9mm. There are two screws on the standard excenter, one for the motor shaft and one for the bearing shaft. You only need to use the one for the motor shaft. Install the new assembly on the motor shaft and make sure that the screw ends up on the flat part of the shaft and tighten it securely. Check that the Connecting rod aligns properly with the groove in the Piston. This is important, if it does not align correctly it will not run properly and you might have to readjust the location of the motor. In that case please refer to the manual or send for service. If ok align the upper bearing with the hole in the piston and insert the Connecting pin and install the Circlip. X2 Eccentric assembly with preset STANDARD stroke of 3.7mm for InkMachines Dragonfly X2 tattoo machine, original spare part no. 41B, 1 piece. The STANDARD variant with 3.7mm stroke is the universal configuration recommended by InkMachines, offering the ideal balance between precision and power for most tattoo styles. This versatile stroke successfully covers lining, shading, color packing, and general work, making it the optimal choice for both experienced artists and those starting out. The 3.7mm stroke provides moderate penetration that works well on most skin types and all body areas, representing an ideal compromise between the fine 2.6mm stroke and the aggressive 4.5mm stroke. Manufactured with legendary InkMachines precision, the STANDARD eccentric assembly guarantees a stroke of exactly 3.7mm at each cycle, ensuring the consistency and repeatability necessary for professional tattoos. The Dragonfly X2 with STANDARD eccentric is the most popular configuration, being the machine on which thousands of artists worldwide build their careers. Original InkMachines part priced at approximately 38 EUR, the most versatile investment in tattoo equipment. The versatility of the STANDARD stroke makes this configuration the number one choice of professional artists worldwide. The STANDARD eccentric is available on tatuat.ro, the authorized InkMachines distributor in Romania, with fast delivery nationwide and Swedish manufacturer guarantee. This is the most recommended starting configuration for any artist looking to get the most versatile performance from their Dragonfly X2. Frequently Asked Questions Why is the STANDARD 3.7mm stroke the most popular? The 3.7mm stroke offers the perfect balance between precision and power, being fine enough for quality lines and long enough for efficient fills. It is the InkMachines recommended configuration as a starting point and can successfully cover over 80% of typical tattoo work. Is the STANDARD stroke sufficient for color packing? Yes, the 3.7mm stroke can achieve quality color packing for most work. For projects requiring extremely intense saturation or for very resistant skin types, the LONG 4.5mm eccentric may be more efficient. For general use, STANDARD excellently covers filling needs as well. Is the STANDARD stroke good for fine lines too? The 3.7mm stroke can produce good quality lines but is not as precise as the SHORT 2.6mm stroke for ultra-fine lines or dotwork. For an artist wanting a single versatile configuration, STANDARD is the optimal choice. For specialization in fine lines, complement with the SHORT eccentric. Does the STANDARD eccentric come pre-installed in the Dragonfly X2? The Dragonfly X2 machine comes with one of three eccentrics pre-installed depending on the variant chosen at purchase. The STANDARD 3.7mm eccentric is most frequently requested and is the default configuration for most orders. Check specifications at purchase to confirm the included stroke. How much does the STANDARD 3.7mm eccentric cost? The X2 eccentric assembly STANDARD 3.7mm InkMachines no. 41B is available at approximately 38 EUR. The same price applies to all stroke variants. It is the most recommended first investment in eccentrics for artists building their configuration collection. If I can only have one eccentric, which should it be? If you can only have one eccentric, STANDARD 3.7mm is the clear choice. It is the most versatile, successfully covering all basic styles: lining, shading, and filling. It offers the best compromise between finesse and power, making it ideal as the sole eccentric in an artist's arsenal. How does the STANDARD eccentric compare to other machines? The InkMachines 3.7mm stroke is comparable to standard strokes of other premium manufacturers. The difference lies in manufacturing precision - InkMachines guarantees each eccentric delivers exactly the specified stroke, every cycle, without variation. This consistency is what differentiates professional equipment from generic. Does the STANDARD eccentric need maintenance? The eccentric assembly is a precision component that benefits from periodic cleaning and light lubrication. Visually inspect for wear at regular intervals. With proper maintenance, the STANDARD eccentric can last years of professional use without performance degradation. Can I use the STANDARD eccentric for realistic tattoo? Yes, the STANDARD 3.7mm stroke is excellent for realistic tattoos. It offers sufficient precision for details and subtle gradients, combined with the power needed for fills and shadow work. Many renowned artists specializing in realism use the Dragonfly X2 with STANDARD eccentric as their main machine. Does the STANDARD eccentric wear at the same rate as other variants? The wear rate is similar for all three eccentric variants, as materials and manufacturing are identical. Wear depends more on usage intensity and maintenance quality than on stroke length. All variants are designed for durability under professional use conditions.