Ce conține exact kit-ul?

Kit-ul conține 8 șuruburi din oțel inoxidabil, în următoarele dimensiuni metrice: 1 bucată M3*3, 1 bucată M2*6, 3 bucăți M2*2, 2 bucăți M2*5 și 1 bucată M2*10. Este sortimentul complet de șuruburi folosite la asamblarea și întreținerea mașinii Dragonfly.

Se potrivește și la alte mașini, de exemplu Stingray?

Acest set este specificat de producător pentru mașina InkMachines Dragonfly („Screw kit Dragonfly”, „pentru a se potrivi Dragonfly”). Dacă ai un alt model, cel mai sigur este să folosești setul de șuruburi dedicat acelui model, deoarece punctele de fixare și dimensiunile pot diferi. Nu presupune compatibilitatea doar pentru că șuruburile au aceeași filetare metrică.

Pot folosi șuruburi generice M2 și M3 din comerț?

Din punct de vedere al filetării, un șurub metric M2 sau M3 de aceeași dimensiune se potrivește fizic. Producătorul recomandă însă explicit „nu folosiți alte șuruburi”: șuruburile generice pot avea toleranțe și duritate diferite, iar folosirea lor riscă să uzeze filetul mașinii sau să nu mențină strângerea. Pentru siguranță, folosește setul original.

Ce chei îmi trebuie pentru aceste șuruburi?

Îți trebuie chei imbus (Allen) metrice, de dimensiuni foarte mici, potrivite exact pe capul fiecărui șurub. Folosește întotdeauna cheia de mărimea corectă și în stare bună — o cheie prea mare, prea mică sau uzată rotunjește capul șurubului și îl face aproape imposibil de scos ulterior.

Trebuie să dezinfectez mașina după ce înlocuiesc șuruburile?

Da. Deși șuruburile în sine nu ating pielea clientului, orice demontare și remontare a mașinii se încheie cu curățarea și dezinfecția mașinii conform protocolului de igienă din studio, înainte de următoarea ședință. Lucrează pe o suprafață curată și cu mâinile curate pentru a nu contamina componentele.

De câte kit-uri de rezervă am nevoie?

Recomandăm cel puțin un kit complet de rezervă în studio. Motivul principal: șuruburile M2 sunt foarte mici și se pot pierde ușor în timpul demontării, iar un singur șurub lipsă poate bloca reasamblarea mașinii. Dacă ai mai multe mașini Dragonfly sau faci service frecvent, e utile să ai două-trei seturi.

Inkmachines nr. 50 - Screw kit Dragonfly - 8pcs (M33 - 1, M26 - 1, M22 - 3, M25 - 2, M2*10 - 1)

Ink Machines

Cod produs: 375588

17,00 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Specifications

Brand: Ink Machines
Material: Stainless steel
Quantity: 8 pieces
Dimensions: M3*3, M2*6, M2*2, M2*5, M2*10
Compatibility: Dragonfly
Usage: Assembly/Maintenance

Ghiduri utile:Piese de schimb Ink Machines — Dragonfly, Stingray, Scorpion, Cobra: ghid InkMachines — mașini suedeze și piese de schimb (Dragonfly, Scorpion, Stingray, Cobra)Întreținerea mașinii de tatuat: piesele de schimb esențiale

Guide & full description

Complete guide: Inkmachines nr. 50 - Screw kit Dragonfly - 8pcs (M33 - 1, M26 - 1, M22 - 3, M25 - 2, M2*10 - 1)

This set brings together the original screws you need to assemble, maintain, or repair the InkMachines Dragonfly rotary machine. There are 8 stainless steel screws in the exact metric dimensions required by the machine's construction: 1x M3*3, 1x M2*6, 3x M2*2, 2x M2*5, and 1x M2*10. It is a service part, not a consumable — keep it in the studio as a spare for when you disassemble the machine for cleaning or lose a screw during work. It is intended for artists and studios working with a Dragonfly who do not want to get stuck during reassembly.

How to use

Work on a clean, light-colored surface, with a small container to place the screws as you remove them — the M2 parts are tiny and very easy to lose.
Identify each size before assembly (1x M3*3, 1x M2*6, 3x M2*2, 2x M2*5, 1x M2*10); each screw type goes into a specific point in the machine assembly.
Use a metric hex (Allen) key of the exact size of the screw head, fully seated in the socket, to avoid rounding the head.
Start the screw by hand, straight, without forcing; if you feel resistance, stop and realign it — do not force it, to avoid damaging the machine's threads.
Tighten firmly, but not excessively: follow the manufacturer's instruction 'do not overtighten', to avoid damaging the thread or component.
Finally, check that no socket is left without a screw and briefly run the machine to confirm there are no vibrations or abnormal play.
Store the remaining screws from the kit in their packaging, labeled, as a spare set for future servicing.

Tips from us

Keep at least one complete spare kit in the studio — a single lost M2 screw on the floor or in the sink can completely block the reassembly of the machine.
Use only the screws from this set, fitted for Dragonfly; do not mix screws leftover from other machines or kits.
Always disassemble over a tray or a light-colored towel, so you can immediately see any dropped part.
Do not reuse a screw with worn threads or a deformed hex head — replace it from the kit, otherwise it will no longer hold the tightness.
Check the condition of the hex keys before work; a worn or wrong-sized key rounds the screw head and makes it hard to remove.

Warning: This is a service part for the machine, not an item that touches the skin, but hygiene remains important: after any disassembly and reassembly, clean and disinfect the machine according to your usual protocol before tattooing again. Do not overtighten the screws — excessive tightening can wear out or destroy the machine's threads or deform the screw head. Use the set only on the machine it is specified for (Dragonfly) and only the correct size hex keys to avoid damaging the socket.

Frequently asked questions

What exactly does the kit contain?▾

The kit contains 8 stainless steel screws in the following metric dimensions: 1 piece M3*3, 1 piece M2*6, 3 pieces M2*2, 2 pieces M2*5, and 1 piece M2*10. It is the complete assortment of screws used for the assembly and maintenance of the Dragonfly machine.

Does it fit other machines, for example Stingray?▾

This set is specified by the manufacturer for the InkMachines Dragonfly machine ('Screw kit Dragonfly', 'to fit Dragonfly'). If you have a different model, it is safest to use the dedicated screw set for that model, as the mounting points and dimensions may differ. Do not assume compatibility just because the screws have the same metric threading.

Can I use generic commercial M2 and M3 screws?▾

From a threading standpoint, a metric M2 or M3 screw of the same size physically fits. However, the manufacturer explicitly recommends 'do not use other screws': generic screws may have different tolerances and hardness, and using them risks wearing the machine's threads or not maintaining the tightness. For safety, use the original set.

What tools do I need for these screws?▾

You need metric hex (Allen) keys of very small sizes, fitting exactly on the head of each screw. Always use the correct size key in good condition — a key that is too big, too small, or worn rounds the screw head and makes it nearly impossible to remove later.

Do I need to disinfect the machine after replacing the screws?▾

Yes. Although the screws themselves do not touch the client's skin, any disassembly and reassembly of the machine should end with cleaning and disinfecting the machine according to the studio's hygiene protocol before the next session. Work on a clean surface with clean hands to avoid contaminating the components.

How many spare kits do I need?▾

We recommend at least one complete spare kit in the studio. The main reason: M2 screws are very small and can easily be lost during disassembly, and a single missing screw can block the reassembly of the machine. If you have multiple Dragonfly machines or do frequent service, it is useful to have two or three sets.

Product description

Inkmachines nr. 50 - Screw kit Dragonfly 8pcs (M3*3 - 1, M2*6 - 1, M2*2 - 3, M2*5 - 2, M2*10 - 1)Hint! Stainless steel screws to fit the Dragonfly. Do not use other screws and do not over tighten. The Dragonfly Screw Kit InkMachines (part no. 50) is the complete set of original screws for the InkMachines Dragonfly rotary machine, containing 8 essential pieces in the exact dimensions needed for machine assembly and maintenance: 1x M3*3, 1x M2*6, 3x M2*2, 2x M2*5, and 1x M2*10. This kit represents the complete assortment of metric screws used in the Dragonfly machine construction, each dimension corresponding to a specific function in the mechanical assembly — from housing and internal component fixing to motor and drive mechanism mounting. All screws are manufactured to original InkMachines specifications from quality steel with surface treatment resistant to corrosion and mechanical wear. The precision metric dimensions (M2 and M3) are calibrated with exact tolerances to fit the machine threads without play or excessive force. Using generic screws with different tolerances can cause: damaged machine threads, insufficient tightening leading to vibrations, or excessive tightening that can crack aluminum components. The kit is indispensable for service operations, parts replacement, or complete reassembly after deep cleaning. We recommend keeping a complete spare kit in your studio — losing a single M2 screw during disassembly can block machine reassembly. Screws should be replaced whenever they show worn threads, deformed heads (damaged hex/Allen), or no longer maintain firm tightness. The quality of material and surface treatment of original screws is crucial for protecting the anodized aluminum threads of the Dragonfly machine. Non-original screws may have excessive hardness that damages the softer aluminum thread, or insufficient hardness leading to Allen head deformation during tightening. InkMachines specification ensures optimal hardness — sufficient for maintaining long-term tightness, yet compatible with machine materials. The complete kit eliminates the need to search for individual dimensions in specialty stores, where M2x2 or M2x5 availability is often limited. Frequently Asked Questions