Complete guide: Inkmachines nr. 96 - Cover for Dragonfly - 1pcs
This is the original Ink Machines replacement part no. 96 — the plastic protective cap for the Dragonfly rotary machine. It mounts over the machine body for more hygienic operation, keeping the mechanism away from direct contact with ink, wash water, and transfer spray. It is useful for any artist with a Dragonfly machine who wants to replace a damaged, cracked, or lost cap, or to have a spare in their kit. Sold individually (1 piece).
How to use
- Check your machine model — cap no. 96 fits the Dragonfly.
- Clean and dry the area of the machine body where the cap sits.
- Align the cap with the machine body in the correct position.
- Snap it into place — no tools are needed for installation.
- Check that it sits firmly, without play during normal handling.
- For service (cleaning or access to internal components), remove it by reversing the procedure, also without tools.
- Clean and disinfect the cap after each session before putting it back.
Tips from us
- Keep a spare cap in your kit — if the mounted one cracks, you can swap it on the spot without interrupting your schedule.
- The cap complements hygiene, it does not replace it: still use a protective bag/wrap on the machine and cables during tattooing.
- Periodically check that the part has no play — a loose cap may vibrate during work.
- Do not use a cracked or damaged cap: it no longer properly covers the machine compartment.
- Order the original Ink Machines part to be sure of dimensional fit with the machine body.
Warning: Clean and disinfect the cap with 70% isopropyl alcohol after each client to remove ink and spray residue. Being plastic, it withstands common disinfectants well, but avoid aggressive scrubbing that could scratch it. The cap does not replace standard hygiene measures — continue to use disposable barriers (machine bag, cable wraps) and disinfect the entire machine at the end of the session. Do not install a cracked or damaged part.
Frequently asked questions
Does it fit any Dragonfly machine?▾
Cap no. 96 is the original Ink Machines part for Dragonfly. However, there are different machine versions — for example, the Dragonfly X2 uses a separate part (X2 Cap no. 94), which is not interchangeable. Check the exact model of your machine before ordering to ensure correct fit.
Do I need tools to install or remove it?▾
No. The cap is installed and removed without tools: you align it and snap it into place, and removal for service is done by reversing the procedure, in seconds.
What material is it made of and how many pieces do I receive?▾
It is a plastic cap and is sold individually, as a replacement part — one piece per order.
What exactly is it used for?▾
It covers the machine compartment for more hygienic operation and protects the mechanism from direct contact with ink, wash water, and transfer spray. Essentially, it keeps contaminants away from internal components and maintains a clean, professional appearance.
How do I properly clean and disinfect it?▾
Wipe it with 70% isopropyl alcohol after each session to remove ink and spray residue. Being plastic, it withstands common disinfectants well; however, avoid abrasive products or aggressive scrubbing that could scratch it.
Can I use the machine without the cap?▾
Technically it works without it, but it is not recommended: the mechanism remains exposed to ink, water, and dust. For tattooing sessions, always install the cap, both for protection and for a professional appearance.
Product description
Inkmachines nr. 96 - Cover for Dragonfly Plastic cover for more hygienic operation. Fits the Dragonfly. No tools required to fit or remove.
The InkMachines Cover for Dragonfly nr. 96 is the original protective cover designed for the InkMachines Dragonfly rotary machine, the exterior piece that covers and seals the mechanical compartment of the machine, protecting internal components from contaminants and contributing to the equipment's professional aesthetics. Unlike the X2 Cap (nr. 94) which is specific to the Dragonfly X2 model, this cover is designed for earlier or complementary Dragonfly models, with geometry and fixing system adapted to the specific body of the respective version. The cover fulfills critical functions: protecting the internal mechanism (cams, motor shaft, damper, springs) from ink, wash water, transfer spray, and other contaminant ingress; reducing operating noise through encapsulation of moving mechanical components; maintaining structural rigidity of the assembly; and presenting a clean professional appearance to clients. Manufactured from anodized aerospace aluminum alloy or high-strength engineered polymer, the cover withstands accidental impacts, chemical cleaning substances, and repeated mounting-dismounting cycles required for machine service. The fixing system is designed for quick tool-free mounting, allowing easy access to internal components for cam changes, damper replacement, or periodic cleaning. The product is sold individually (1 piece), as a replacement part for a damaged, cracked, scratched, or lost cover. The original InkMachines part guarantees perfect dimensional compatibility with the Dragonfly machine body.
Frequently Asked Questions
