A black silicone power cable that connects the coil tattoo machine to the power supply, with classic alligator clip attachment and a length of 1.63 m. The silicone casing makes it much more flexible than rigid cables, so it no longer gets in your hand every time you reposition the machine. It is a basic piece for any artist working with coil machines — either as the main cable or as a safety backup in the studio.
Does this clipcord work on rotary machines as well?▾
Not directly. The clipcord is designed for coil machines, which have exposed binding posts for the alligator clips. Modern rotary machines typically use RCA connection or their own cable. There are adapters that make the transition, but if you work predominantly on rotary, a dedicated RCA cable is the natural choice — the clipcord remains the standard solution for coils.
How do I properly sanitize it between clients?▾
The basic rule: barrier, not sterilization. The cable is covered with a disposable sleeve (clipcord sleeve) for the entire session, and the sleeve is thrown away at the end. Then you wipe the cable with a surface disinfectant solution. Do not put the clipcord in an autoclave and do not submerge it in liquids — surface disinfection plus a new sleeve for each client covers the hygiene requirements in a studio.
Why silicone and not a regular rigid plastic cable?▾
Silicone remains flexible during use, so it doesn't get in your hand when you move the machine and doesn't resist repositioning. Rigid cables tend to stiffen over time, and repeated bending leads to breaking of the internal wires and intermittent contact loss. The flexibility of silicone reduces exactly this type of wear, so the cable withstands daily use better.
What length does it have and will it reach my workstation?▾
The cable is 1.63 m — enough for the typical setup where the power supply sits on the work table or on a stand next to the chair. You have freedom of movement around the client without pulling on the cable. If your power supply is unusually far from the work area, measure the distance beforehand, as with any power cable.
Can I use the same clipcord on both liner and shader?▾
Yes. The classic alligator clip attachment fits on the binding posts of any coil machine, whether liner or shader. Many artists move a single clipcord from one machine to another during the session. The important thing is that the clips make firm contact each time, without play — otherwise interruptions in operation occur.
By what signs do I realize it needs to be replaced?▾
The three classic signs: the machine operates intermittently even though the clips are well attached, the cable heats up abnormally during work, or you see cracks or fissures in the silicone insulation. Any of these means the internal wires or insulation have failed. Do not delay replacement — a faulty cable can ruin your rhythm in the middle of a tattoo, and the price of a new clipcord does not justify the risk.
