Se potrivește pedala cu sursa mea de tensiune?

Pedala este gândită pentru mașinile de tatuat standard și se conectează la intrarea de pedală a sursei printr-un cablu cu mufă de 0,5 cm în diametru. Înainte de comandă, verifică două lucruri la sursa ta: că are intrare dedicată pentru pedală (footswitch) și că aceasta acceptă acest tip de mufă. La sursele standard din industrie, conexiunea se face direct, fără adaptoare — introduci mufa în portul de pedală și ești gata de lucru.

Ce avantaj are forma rotundă față de alte pedale?

Acționarea la 360°. La o pedală clasică, dreptunghiulară, trebuie să calci dintr-o direcție anume; la cea rotundă poți apăsa din față, din lateral sau din spate, fără să te uiți în jos ca să aliniezi piciorul. Este un avantaj real când te miști cu scaunul în jurul clientului pe parcursul ședinței. Suprafața cu design „stea” și baza anti-alunecare completează pachetul: pedala rămâne pe loc, iar piciorul nu alunecă de pe ea.

Cum întrețin și igienizez pedala?

După fiecare ședință, deconectează pedala de la sursă și șterge-o cu o lavetă umezită cu dezinfectant de suprafețe standard de studio. Nu o scufunda în lichid și nu pulveriza soluție direct pe ea — umezeala poate pătrunde la mecanismul intern. Verifică periodic cablul pentru fisuri sau îndoituri și depoziteaz-o fără a înfășura cablul strâns. Cu această întreținere minimă, o pedală simplă ca aceasta, fără funcții complicate, rămâne funcțională mult timp.

Sunt la început — îmi ajunge o pedală simplă ca aceasta?

Da. Pedala de tatuaj este, în esență, un întrerupător: apeși — mașina pornește, ridici piciorul — se oprește. Nu are reglaje proprii și nici nu are nevoie de ele, pentru că voltajul îl setezi din sursa de tensiune. Tocmai simplitatea o face fiabilă și ușor de folosit din prima ședință. Mulți artiști cu experiență păstrează o astfel de pedală ca rezervă, mai ales că dimensiunea de 9 x 3 cm și greutatea de 175 g o fac ușor de purtat în geantă.

Este suficient cablul de 142 cm?

Pentru configurația tipică de studio — sursa așezată pe masa de lucru și pedala pe podea, sub masă — cei 142 cm acoperă lejer distanța. Dacă sursa ta este montată mai departe de locul unde stai cu piciorul, măsoară traseul real înainte de comandă. Un sfat practic: nu lăsa cablul întins la maximum sau tensionat în mufă, pentru că solicitarea permanentă a conexiunii îi scurtează viața.

Pot lucra și fără pedală?

Depinde de sursa ta: unele surse au mod de funcționare continuă, în care mașina merge fără pedală. Pedala îți oferă însă un control pe care modul continuu nu îl are — oprești mașina într-o fracțiune de secundă doar ridicând piciorul, fără să atingi nimic cu mâinile. Este util când ștergi excesul de tuș, schimbi culoarea sau clientul se mișcă. Pentru mulți artiști, pedala rămâne modul preferat de lucru tocmai pentru acest control instant.

Foot Pedal Round

Cod produs: 371087

24,70 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Specifications

Weight: Light
Material: Premium
Length: 142 cm
Dimensions: 9cm * 3cm
Compatibility: Bronc, Hurricane
Shape: Round
Color: Black

Ghiduri utile:Sursa de alimentare pentru tatuaj — ghid pe înțeles Pedale și clipcord pentru tatuaj: rol, tipuri și conectică Critical: surse de alimentare și baterii wireless pentru mașini

Presentation video

Guide & full description

Complete guide: Foot Pedal Round

A circular foot pedal that starts and stops the tattoo machine, leaving both hands free during work. It connects to the power supply via a 142 cm cable and is suitable for standard tattoo machines. Thanks to 360-degree activation, you can press it from any angle, and the compact 9 x 3 cm size and only 175 g weight make it easy to transport. It is a practical choice for both beginners and as a backup pedal in an experienced artist's kit.

How to use

Unpack the pedal and visually inspect the cable along its entire length, as well as the plug, before first use.
Place it on the floor on a flat surface under the work table or chair — the non-slip base keeps it stable in the chosen spot.
Connect the cable plug (0.5 cm diameter) to the dedicated pedal input of your power supply.
Turn on the power supply and set the desired voltage from the power supply — the pedal has no adjustments of its own, it works as a switch.
Press the pedal with your foot to start the machine; thanks to the round shape and 360-degree activation, you can press it from any direction without aligning your foot.
Release the pedal to stop the machine instantly — for example, when wiping excess ink or changing colors.
At the end of the session, disconnect it from the power supply, wipe it with surface disinfectant, and store it without tightly bending the cable.

Tips from us

Test the pedal together with your power supply before the first client session to ensure everything communicates properly.
Always keep the pedal in the same spot under the work table — the foot reflex becomes natural and you won't look for the pedal with your eyes during work.
When moving it, grab the body, not the cable — this protects the connection between the cable and the pedal.
Due to the compact size and 175 g weight, it is a good candidate for a convention or guest spot bag, including as a backup pedal.
Periodically check the 142 cm cable along its entire length — tight kinks and cracks in the insulation are the first signs to watch out for.
Do not stretch the cable to the maximum between the power supply and the pedal; leave a little slack so the plug is not under tension.

Warning: The pedal sits on the floor in the work area, so it becomes part of the station's sanitization routine: after each client, wipe it with a cloth with surface disinfectant. Do not pour liquid directly on the pedal and do not submerge it in solution — liquid can reach the internal mechanism and electrical connections. Always disconnect it from the power supply before cleaning.

Frequently asked questions

Does the pedal fit my power supply?▾

The pedal is designed for standard tattoo machines and connects to the power supply's pedal input via a cable with a 0.5 cm diameter plug. Before ordering, check two things on your power supply: that it has a dedicated pedal (footswitch) input and that it accepts this type of plug. On standard industry power supplies, the connection is direct, without adapters — insert the plug into the pedal port and you're ready to work.

What is the advantage of the round shape over other pedals?▾

360-degree activation. With a classic rectangular pedal, you have to step from a specific direction; with the round one, you can press from the front, side, or back without looking down to align your foot. This is a real advantage when you move your chair around the client during the session. The star-design surface and non-slip base complete the package: the pedal stays in place, and your foot doesn't slip off.

How do I maintain and sanitize the pedal?▾

After each session, disconnect the pedal from the power supply and wipe it with a cloth moistened with standard studio surface disinfectant. Do not submerge it in liquid or spray solution directly on it — moisture can reach the internal mechanism. Periodically check the cable for cracks or kinks and store it without tightly coiling the cable. With this minimal maintenance, a simple pedal like this, without complicated features, remains functional for a long time.

I'm a beginner — is a simple pedal like this enough for me?▾

Yes. A tattoo pedal is essentially a switch: press it — the machine starts, lift your foot — it stops. It has no adjustments of its own and doesn't need them because you set the voltage on the power supply. It is precisely this simplicity that makes it reliable and easy to use from the very first session. Many experienced artists keep such a pedal as a backup, especially since the 9 x 3 cm size and 175 g weight make it easy to carry in a bag.

Is the 142 cm cable enough?▾

For a typical studio setup — the power supply on the work table and the pedal on the floor under the table — the 142 cm easily covers the distance. If your power supply is mounted further from where your foot rests, measure the actual path before ordering. A practical tip: do not leave the cable stretched to the maximum or tensioned at the plug, as constant strain on the connection shortens its life.

Can I work without a pedal?▾

It depends on your power supply: some power supplies have a continuous operation mode where the machine runs without a pedal. However, the pedal gives you control that continuous mode doesn't — you stop the machine in a split second just by lifting your foot, without touching anything with your hands. This is useful when wiping excess ink, changing colors, or the client moves. For many artists, the pedal remains the preferred working mode precisely for this instant control.

Product description

Foot Pedal Round Durable footswitch for tattoo machine, suitable for all standard tattoo machine. Designed with anti-skid, non-marring base. Compact size and light weight, easy to carry. Round shaped black 360Â° tattoo footswitch with "star" design. Standard power cord with the length of about 142cm. 5mm diameter plug, suitable for all standard tattoo power supply. Power cable length: 142cm Power cable plug diameter: 0.5cm Foot pedal size: 9cm * 3cm The Round Foot Switch is a classic tattoo foot pedal with circular design that offers accessibility from any direction and a slim profile ideal for compact workspaces. The traditional round shape allows activating the pedal from any angle, eliminating the need for precise foot positioning and providing total flexibility during tattoo sessions. The construction from durable materials ensures long-term reliability, and the calibrated internal mechanism provides a clear and responsive trigger point. The pedal surface is designed for comfortable foot grip, preventing slipping during use. The anti-slip base keeps the pedal stable on any type of floor surface, from tile to hardwood or linoleum. The connection cable with standard jack plug ensures universal compatibility with all professional power supplies featuring a foot switch input. The slim pedal profile allows comfortable positioning under the work desk without taking excessive space. The black housing finish gives a professional and discreet appearance. The Round Foot Switch is a popular choice among tattoo artists thanks to its simplicity, reliability, and accessible price. It's the ideal foot switch for studios wanting a functional and durable accessory without investing in the premium segment. Compatible with Bronc, Hurricane, and other standard power supplies with jack connection. Frequently Asked Questions What power supplies is the Round Foot Switch compatible with? The Round Foot Switch is compatible with all power supplies featuring a foot switch input with standard jack connection, including Hummingbird Bronc model 1/2/3, Hurricane, and other standard industry power supplies. The universal jack connection ensures broad compatibility with professional equipment. What is the advantage of the round shape? The round shape allows activating the pedal from any direction, without needing to position your foot at a specific angle. You can press the pedal from the front, side, or back, offering natural flexibility and comfort. You don't need to look down to align your foot with the pedal. Is the Round Foot Switch suitable for beginners? Yes, the Round Foot Switch is an excellent choice for beginners thanks to its simplicity, reliability, and accessible price. It has no complicated features, is easy to use from the first session, and connects simply to any standard power supply. It's the minimum investment needed to start tattooing professionally. Does the Round Foot Switch slide on the floor? No, the Round Foot Switch has a base equipped with anti-slip material that keeps it stable on any floor surface. The circular design distributes weight evenly, additionally contributing to stability. The pedal stays in position even on smooth surfaces like tile. How durable is the Round Foot Switch? The Round Foot Switch is built from durable materials that withstand daily professional use. The internal mechanism is designed for a large number of press cycles, ensuring long-term reliability. With minimal maintenance, the pedal will serve faithfully for years. What differences are there between the Round and Trigo Foot Switches? The Round Foot Switch has a circular shape with accessibility from any angle, while the Trigo Foot Switch has a triangular shape with superior stability. Both are quality foot switches at accessible prices. The choice depends on preference: directional flexibility (round) or maximum stability (trigo). How is the Round Foot Switch connected to the power supply? The Round Foot Switch connects to the power supply through its integrated cable with standard jack plug. Insert the jack plug into the power supply's foot switch port and the pedal is ready to use. The connection is simple, quick, and requires no tools or special configuration. Can the Round Foot Switch be cleaned? Yes, the Round Foot Switch can be cleaned with a damp cloth and standard studio disinfectant after each session. Avoid immersion in liquid. The housing materials are resistant to common disinfectants and do not degrade over time with regular cleaning. Is the Round Foot Switch portable? Yes, the Round Foot Switch has a slim profile and reduced weight that make it easy to transport. It fits comfortably in any tattoo equipment bag and adds minimal weight to luggage. It's a practical choice for conventions and travel. How much does the Round Foot Switch cost? The Round Foot Switch is positioned in the most accessible segment of tattoo foot switches on tatuat.ro, offering an exceptional quality-to-price ratio. It's the minimum investment needed for a reliable and functional accessory. For the updated price, check the product page on tatuat.ro.