Este compatibilă cu orice mașină de tatuat?

Sursa are conectică RCA standard, deci se conectează la majoritatea mașinilor rotative și pen de pe piață. Este optimizată pentru acest tip de mașini; mașinile coil necesită de obicei un curent mai mare decât poate furniza formatul ultra-compact, așa că pentru coil este recomandată o sursă de dimensiune standard. Ieșirea este de 18V 1.5A, cu tensiune reglabilă între 1.25V și 17V.

Pot să o folosesc ca sursă principală sau doar ca backup?

Ambele variante sunt valabile. Dacă lucrezi exclusiv cu mașini rotative sau pen, poate fi sursa ta principală de zi cu zi — mulți artiști o folosesc așa, mai ales în studiouri mici sau la convenții, unde spațiul pe masa de lucru este limitat. În același timp, dimensiunile miniaturale și greutatea de 120 g o fac un backup ideal care nu ocupă loc în geantă.

Ce tensiune setez pentru mașina mea?

Tensiunea corectă depinde de mașina folosită și de tehnica de lucru, nu de sursă — consultă recomandările producătorului mașinii tale. Practic, pornești de la o valoare mică și crești treptat din potențiometrul rotativ până mașina rulează cum trebuie, testând în gol înainte de a lucra pe piele. Plaja de reglaj de 1.25V–17V acoperă nevoile uzuale ale mașinilor rotative și pen.

Cum igienizez sursa după o ședință de tatuat?

Regula de bază este prevenția: acoperă sursa și potențiometrul cu bariere de unică folosință (folie de protecție) pe durata lucrului și schimbă-le între clienți. După ședință, oprește sursa, scoate-o din priză, îndepărtează barierele și șterge carcasa metalică cu un șervețel cu dezinfectant de suprafețe. Nu pulveriza lichid direct pe unitate sau pe conectori — lichidele pot pătrunde în componentele electronice.

Funcționează la prize din străinătate, dacă merg la o convenție?

Da, intrarea de 90V–265V acoperă gamele de tensiune de rețea folosite în majoritatea țărilor, ceea ce o face potrivită pentru deplasări internaționale. În funcție de țară, este posibil să ai nevoie doar de un adaptor fizic de priză pentru ștecher. Folosește întotdeauna adaptorul de rețea original livrat cu sursa.

Ce cablu îmi trebuie ca să o conectez la mașină?

Ai nevoie de un clipcord cu mufă RCA, care se conectează direct între sursă și mașină. Un detaliu practic: la o sursă atât de compactă, un clipcord cu mufă la 90 de grade reduce tensiunea mecanică pe conector și este mai comod de poziționat pe masa de lucru. Alege un clipcord de calitate — contactul stabil înseamnă funcționare constantă a mașinii pe toată durata lucrării.

Power Supply Micro Black

Cod produs: 371107

107,00 Lei-65%

37,00 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Specifications

Weight: Light
Material: Aluminum Metal
Voltage: 90V-265V
Output Voltage: 1.25V - 17V
Format: Compact
Color: Black
Compatibility: Standard RCA

Ghiduri utile:Sursa de alimentare pentru tatuaj — ghid pe înțeles Pedale și clipcord pentru tatuaj: rol, tipuri și conectică Critical: surse de alimentare și baterii wireless pentru mașini

Presentation video

Guide & full description

Complete guide: Power Supply Micro Black

An ultra-compact power supply for tattoo machines, with a matte black aluminum metal casing and fine voltage adjustment via a rotary potentiometer. At only 120 grams, it fits in the palm of your hand and in any equipment bag, designed for artists working with rotary or pen machines — either as a main power source in a small studio, or as a reliable backup at conventions and on the go.

How to use

Connect the included external adapter to the main unit, then to the power outlet. Thanks to the 90V–265V input, the power supply works on a wide range of mains voltages.
Connect the RCA clipcord to the power supply and to your tattoo machine. The standard RCA connector ensures compatibility with most rotary and pen machines on the market.
Apply disposable protective barriers (film or cover) over the power supply and potentiometer before starting work with the client.
Turn on the power supply and set the voltage using the rotary potentiometer, starting from a low value. The adjustment range is 1.25V–17V.
Test the machine idle for a few seconds and fine-tune the voltage until you achieve the desired operation, according to your machine manufacturer's recommendations.
Between clients or when changing technique, quickly adjust the voltage using the potentiometer — over the protective barrier, not directly on the casing.
At the end of the session, turn off the power supply, disconnect it from the outlet, remove the barriers, and wipe the casing surface with a disinfectant wipe. Do not spray liquids directly on the unit.

Tips from us

Use an RCA clipcord with a 90-degree plug — on such a small power supply, it reduces mechanical stress on the connector and lowers the risk of damage to the plug over time.
Power the supply exclusively with the original adapter included in the package; an unsuitable adapter may affect operation and void the warranty.
Note down the voltage settings that work well for each machine in your setup — with a rotary potentiometer, you can return to them much faster.
Keep it as a permanent backup in your convention bag: at 120 g and pocket size, you won't feel the weight, and a spare power supply saves you if the main one fails in the middle of a job.
The matte black finish hides fingerprints and wear marks, but it's still worth wiping after each work day to prevent ink residue buildup.
If you work with high-power coil machines, choose a standard-size power supply — the micro format is optimized for rotary and pen machines.

Warning: The power supply is an electrical device located in the work area, so it must be treated as a potentially contaminated surface: cover it with disposable barriers during each session and change them between clients. Do not spray disinfectant directly on the casing or connectors — apply the solution to a wipe and clean the surface, with the power supply turned off and unplugged. Never introduce liquids into the interior of the unit and only use the original power adapter.

Frequently asked questions

Is it compatible with any tattoo machine?▾

The power supply has a standard RCA connector, so it connects to most rotary and pen machines on the market. It is optimized for these types of machines; coil machines usually require a higher current than the ultra-compact format can provide, so for coil machines a standard-size power supply is recommended. The output is 18V 1.5A, with adjustable voltage between 1.25V and 17V.

Can I use it as a main power supply or only as a backup?▾

Both options are valid. If you work exclusively with rotary or pen machines, it can be your everyday main power supply — many artists use it that way, especially in small studios or at conventions where workspace is limited. At the same time, the miniature size and 120 g weight make it an ideal backup that doesn't take up space in your bag.

What voltage should I set for my machine?▾

The correct voltage depends on the machine used and the working technique, not on the power supply — consult your machine manufacturer's recommendations. Basically, you start from a low value and gradually increase using the rotary potentiometer until the machine runs properly, testing idle before working on skin. The adjustment range of 1.25V–17V covers the usual needs of rotary and pen machines.

How do I sanitize the power supply after a tattoo session?▾

The basic rule is prevention: cover the power supply and potentiometer with disposable barriers (protective film) during work and change them between clients. After the session, turn off the power supply, unplug it, remove the barriers, and wipe the metal casing with a surface disinfectant wipe. Do not spray liquid directly on the unit or connectors — liquids can penetrate the electronic components.

Does it work on foreign outlets if I go to a convention?▾

Yes, the 90V–265V input covers the mains voltage ranges used in most countries, making it suitable for international travel. Depending on the country, you may only need a physical plug adapter for the wall socket. Always use the original power adapter supplied with the power supply.

What cable do I need to connect it to the machine?▾

You need an RCA clipcord, which connects directly between the power supply and the machine. A practical detail: on such a compact power supply, a clipcord with a 90-degree plug reduces mechanical stress on the connector and is more convenient to position on the work table. Choose a quality clipcord — stable contact means consistent machine operation throughout the job.

Product description

Power Supply Micro High quality power supply. Beautiful appearance and excellent workmanship. Durable, compact, easy to transport and use. Fine workmanship with strong and excellent performance. Precise tension setting for professional and precise operation. Suitable for all types of tattoo machines. The upper metal case increases resistance and durability. Specifications: Input: 90V-265VOutput: 18V 1.5ABasic output voltage: 1.25V - 17VMaterial: Metal Aluminum The Micro Black Power Supply is the classic black finish version of the most compact tattoo power supply in the tatuat.ro range, offering extreme portability in a professional and discreet format. With the same miniature dimensions as the blue variant, the Micro Black Power Supply fits comfortably in the palm of your hand and takes minimal space in equipment bags or on the work table. The black finish makes it integrate perfectly with any tattoo setup, complementing premium equipment that is predominantly black. Despite the ultra-compact format, it offers adjustable output voltage via rotary potentiometer, sufficient for stable power to professional rotary and pen machines. The standard RCA connection ensures universal compatibility with machines on the market. The durable material housing protects internal electronic components and withstands the mechanical shocks inevitable during travel. The Micro Black Power Supply is the preferred choice of artists who want a reliable backup that doesn't add weight or volume to their luggage, as well as artists who work at tattoo conventions where workspace is often limited. The included external power adapter keeps the main unit dimensions at a minimum, and intuitive potentiometer control allows quick voltage adjustments between clients or different techniques. The matte black housing is resistant to fingerprints and visual wear, maintaining a new appearance long-term. Frequently Asked Questions What is the difference between the Micro Black and Blue Power Supply? The difference is exclusively aesthetic - the housing color. Both variants have identical technical specifications, same dimensions, same performance, and same RCA connectivity. The black variant integrates more discreetly into professional setups, while the blue variant adds a touch of color and personality. Is the Micro Black Power Supply suitable for coil machines? The Micro Power Supply is optimized for professional rotary and pen machines. Coil machines usually require more current than the ultra-compact Micro Power Supply format can deliver. For coil machines, we recommend a standard-size power supply like Hurricane, Bronc, or Nemesis Kwadron. Can I use the Micro Power Supply as my main power supply? Yes, if you work exclusively with rotary or pen machines, the Micro Power Supply can be your main power supply. Many artists use it daily as their sole power supply, especially in small studios or for styles that don't require high-power machines. Alternatively, it's an excellent backup. How durable is the Micro Black Power Supply housing? The Micro Black Power Supply housing is made from durable material that withstands mechanical shocks, scratches, and daily wear. The matte black finish is fingerprint-resistant and doesn't show wear quickly. The construction is specially designed to withstand frequent transport in equipment bags. What clipcord is recommended for the Micro Power Supply? We recommend a quality RCA clipcord for the Micro Power Supply. From the tatuat.ro range, Big Wasp or Critical RCA clipcords are excellent options. A clipcord with a 90-degree plug may be more practical due to the power supply's reduced dimensions, reducing mechanical stress on connectors. Why choose black instead of blue? Black is the classic and professional choice that integrates discreetly with any tattoo setup. The matte black finish better conceals ink marks, fingerprints, and visual wear compared to other colors. It's the ideal choice for artists who prefer a uniform and professional equipment appearance. How is the Micro Black Power Supply powered? The Micro Black Power Supply is powered through an external mains adapter included in the package. The adapter connects to a standard outlet and supplies the necessary voltage to the main unit. Use only the original adapter to ensure correct operation and avoid voiding the warranty. Is the Micro Power Supply quiet? Yes, the Micro Power Supply operates completely silently, without a fan or other moving components that produce noise. The passive heat dissipation design ensures silent operation under any conditions, contributing to a comfortable work environment for both artist and client. How much does the Micro Black Power Supply cost? The Micro Black Power Supply is positioned in the accessible segment of the tatuat.ro range, offering an exceptional quality-to-price ratio for the portability and functionality it provides. For the updated price, please check the product page on tatuat.ro or contact the sales team. Is the Micro Power Supply suitable for PMU? Yes, the Micro Power Supply can also be used for PMU procedures with RCA-compatible pen machines. The compact dimensions and portability make it a practical choice for PMU technicians who travel to clients or work in small spaces. Check the required voltage of your PMU machine for compatibility.