Complete guide: Hummingbird Pen Wireless Bronc X1 Tattoo Machine - Black
The Bronc X1 from Hummingbird is a wireless, adjustable pen-style tattoo machine designed for artists who want a compact tool, free from a cable tied to an external power supply, but with fine control over needle stroke and penetration depth. The removable battery provides freedom of movement during sessions, and the Swiss-made DC motor supports, according to the manufacturer, a consistent workflow with reduced vibration and noise. Thanks to the wide adjustment range of stroke and needle depth, it is suitable for both fine lines and shading.
How to use
- Charge the removable battery with the Type-C cable; a full charge takes 2–2.5 hours and provides, according to the manufacturer, 7.0–9.0 hours of continuous work.
- Mount the charged battery into the machine body and ensure it is securely fixed before starting.
- Adjust the stroke length within the range 2.6–4.0 mm, depending on the technique — lower values for fine lines, higher for shading.
- Adjust the needle depth within the range 0–4.5 mm, gradually, testing first on artificial skin.
- Set the supply voltage within the available range 5.0–11.0V; the manufacturer recommends 5.5–7.5V, so start from a low value and increase progressively until you achieve the desired result.
- Turn on the machine and check the constant motor rotation (11,000 rpm no-load) before starting work on skin.
- At the end of the session, turn off the machine, remove the used needle/cartridge, and follow the sanitization protocol in the 'Attention' section.
Tips from us
- Do not leave the battery completely discharged for long periods — charge it regularly to maintain its long-term autonomy.
- For long sessions, keep a second charged battery ready, considering the 7.0–9.0 hours of autonomy per charge.
- For fine lines, choose a smaller stroke (towards 2.6 mm) and a reduced needle depth; for shading, increase both values towards the upper limit.
- Always test the voltage setting on artificial skin before working on a client, especially if you change the needle or technique.
- Periodically check the needle/cartridge fixation during the session, especially after frequent depth adjustments.
Warning: The tattoo machine comes into direct contact with skin and blood, so proper hygiene is mandatory: use disposable protective barriers (film/covers) on the machine body and battery cable, sterile, single-use needles or cartridges, and frequently changed gloves. Disinfect the machine's external surfaces after each client, following your studio's protocol, but avoid contact of the battery and Type-C charging port with disinfectant liquids or water. Never reuse needles or cartridges between clients.
Frequently asked questions
Is the Bronc X1 machine suitable for a beginner artist?▾
Yes — it has clear adjustments for stroke (2.6–4.0 mm) and needle depth (0–4.5 mm), plus a stable motor at 11,000 rpm no-load. We still recommend practicing on artificial skin to find the right voltage and settings before working on clients.
How long does the battery last and how long does a full charge take?▾
The removable 2000 mAh, 3.7V, 18500 Li-Ion battery provides, according to the manufacturer, 7.0–9.0 hours of work per charge, and a full charge via the Type-C port takes 2–2.5 hours.
What working voltage should be set on the power supply?▾
The machine accepts an output voltage between 5.0V and 11.0V, and the manufacturer recommends the range 5.5–7.5V. Start from a low value and increase gradually, depending on your technique and the result you get on line or shading.
How do I maintain and sanitize the machine between sessions?▾
Use disposable protective covers/wraps on the machine body, clean and disinfect external surfaces after each client, and change gloves frequently. Avoid wetting the battery or the Type-C charging port; needles/cartridges must be sterile and single-use.
What needles or cartridges are compatible with this machine?▾
This product's datasheet does not specify a list of compatible needles or cartridges. We recommend checking the product page or contacting us before ordering to choose the right consumables for your type of work.
How much does the machine weigh and what are its dimensions, so I know if it fits well in my hand?▾
With the battery installed, the machine weighs 251 grams, has a diameter of 37 mm and a length of 142 mm — typical dimensions for a 'pen' design, intended for a comfortable grip during long sessions.
Product description
Crafted for artists who value precision and comfort, the Bronc X1 stands out with its key features tailored for exceptional tattooing experiences. With a focus on minimizing disturbances, the Bronc X1 boasts low vibration and low noise levels, ensuring a smooth and uninterrupted workflow for artists and clients alike. Equipped with a removable battery, this machine offers the convenience of uninterrupted sessions, allowing artists the freedom to work without being tethered to a power source. Noteworthy is the rotation adjustment feature of the Bronc X1, providing artists with the ability to fine-tune penetration levels for optimal results. This customizable feature ensures great penetration and enhances control during shading and lining. FEATURESDesign: Sleek and versatile for precision and convenience Size: 37mm diameter, 142mm length, 251 grams with battery Motor: Powerful DC Swiss motor, 11000rpm no-load speed Adjustability: Stroke length 2.6-4.0mm, Needle depth 0-4.5mm Battery: 2000mAh 3.7V 18500 LI-ION, 7.0-9.0 hours work time Charging: Fast charging in 2-2.5 hours with Type-C connection Voltage Output: 5.0V to 11.0V, recommended 5.5V-7.5VVibration:
