Complete guide: Piesa Inkmachines nr. 130 - Ball 3mm (2 pcs)
This is an original spare part for the internal mechanism of the InkMachines Scorpion X2 tattoo machine. The set contains two 3 mm stainless steel ball bearings, marked as part no. 130, which are part of the machine's drive system and contribute to smooth and precise movement. It is intended for tattoo artists who maintain their own equipment and want to keep the machine in optimal condition through preventive maintenance.
How to use
- Disconnect the Scorpion X2 machine from the power source and work on a clean, well-lit surface where the small ball bearings cannot be lost.
- Disassemble the machine following the InkMachines service manual — do not force components and remember the order of parts for reassembly.
- Locate the no. 130 ball bearings in the drive mechanism and remove the old ones.
- Clean the seat of any residue and visually inspect the other components before installation.
- Install the two new 3 mm ball bearings; do not confuse them with the 2 mm ball bearing (no. 131), which has a different position in the mechanism.
- Reassemble the machine in the reverse order of disassembly.
- Run the machine empty, without a needle, to verify that the movement is smooth and free of unusual noises before an actual session.
Tips from us
- Replace both ball bearings simultaneously for even wear and balanced mechanism operation.
- Check the condition of the ball bearings during each deep cleaning of the machine — signs of wear appear gradually.
- Do not mix the 3 mm ball bearings (no. 130) with the 2 mm ones (no. 131): each size has its own position and role.
- Store spare ball bearings in their original packaging in a dry place until use.
- Use original InkMachines parts to maintain exact compatibility with the Scorpion X2.
Warning: The ball bearings are precision mechanical parts, very small — always work with the machine disconnected, on a clean surface, and avoid losing or contaminating them with debris. Do not force the installation; if something does not fit naturally, check the position and consult the service manual. As an internal component, this part relates to machine maintenance and does not replace hygiene rules during tattooing (protective barriers, sterile disposable cartridges, disinfection of surfaces and the grip).
Frequently asked questions
Which tattoo machine is it compatible with?▾
The 3 mm ball bearing no. 130 is an original spare part compatible exclusively with the InkMachines Scorpion X2 machine. It is not compatible with other InkMachines models such as Dragonfly or Stingray.
How many ball bearings are in the set?▾
The set contains 2 ball bearings of 3 mm, exactly the quantity needed for a complete replacement in the Scorpion X2. It is recommended to replace both ball bearings at the same time.
What is the difference between ball bearing no. 130 (3 mm) and ball bearing no. 131 (2 mm)?▾
The two have different sizes and are installed in different positions of the Scorpion X2 mechanism. They are not interchangeable, so it is important to use the correct size for each position.
What material are the ball bearings made of?▾
They are made of stainless steel, which provides corrosion resistance and durability. As an original spare part, the material meets the manufacturer's specifications.
Can I install them myself?▾
Yes, the installation can be done by a tattoo artist with minimal experience in equipment maintenance. We recommend consulting the InkMachines service manual and using appropriate tools for proper disassembly and reassembly of the machine.
How often should they be replaced?▾
It depends on how intensively you use the machine. There is no fixed rule: check the ball bearings during each deep cleaning and replace them when signs of wear appear, such as unusual noise, increased vibration, or jerky needle movement.
Product description
Inkmachines nr. 130 - Ball 3mm (2 pcs)Includes 2pcs
3mm ball for InkMachines Scorpion X2 tattoo machine, original spare part no. 130, set of 2 pieces. These precision balls are essential components of the Scorpion X2 internal drive mechanism, ensuring smooth and accurate movement of the actuation system. Manufactured from high-quality stainless steel, the 3mm balls are machined to extremely tight tolerances, guaranteeing consistent performance and long-term durability. The superior material quality prevents premature wear and ensures quiet operation of the tattoo machine. InkMachines, a Swedish manufacturer globally recognized for engineering innovation and precision, uses only the highest quality components in all their machines. The Scorpion X2 is a versatile tattoo machine compatible with both Neo cartridges and standard cartridges, offering tattoo artists maximum flexibility. Regular replacement of bearing balls is an essential part of preventive maintenance, contributing to extending the machine's lifespan and maintaining optimal performance. Each set contains 2 balls of 3mm diameter, matching the manufacturer's original specifications. Installation is straightforward and can be performed by any tattoo artist with minimal equipment maintenance experience. We recommend checking the condition of the balls during each thorough cleaning session of the machine. Original InkMachines part, exclusively compatible with the Scorpion X2 model. Investing in original InkMachines spare parts is a wise decision that protects professional equipment and ensures consistent results. Available for online order from tatuat.ro with fast delivery throughout Romania.
Frequently Asked Questions Which tattoo machine is the 3mm ball no. 130 compatible with? The 3mm ball no. 130 is exclusively compatible with the InkMachines Scorpion X2 tattoo machine. This is an original spare part designed to the exact specifications of the Swedish manufacturer. It is not compatible with other InkMachines models such as Dragonfly or Stingray. How many 3mm balls are included in the set? The set contains 2 balls of 3mm diameter, exactly the quantity needed for a complete replacement in the Scorpion X2 machine. The balls are individually packaged to prevent damage during shipping. We recommend replacing both balls simultaneously for optimal performance. What material are the 3mm balls made of? The balls are manufactured from high-quality stainless steel, machined to extremely tight tolerances. This material ensures corrosion resistance, exceptional durability, and quiet operation. The material quality is identical to that used in the original factory-installed balls. How often should the bearing balls be replaced? Replacement frequency depends on the intensity of tattoo machine usage. For intensive professional use, we recommend checking the balls every 3-6 months and replacing them when signs of wear are observed. A visual and tactile inspection during regular cleaning can identify the need for replacement. Can I install the 3mm balls in the Scorpion X2 myself? Yes, installing the 3mm balls is a relatively simple process that can be performed by any tattoo artist with minimal equipment maintenance experience. We recommend consulting the InkMachines service manual and using appropriate tools for correct disassembly and reassembly of the machine. What happens if I don't replace worn balls? Worn balls can cause excessive vibration, increased noise, and imprecise needle movement, affecting tattoo quality. In extreme cases, severe wear can damage other components of the internal mechanism. Regular preventive maintenance prevents these issues and extends the machine's lifespan. Are the 3mm balls original InkMachines parts? Yes, these are 100% original InkMachines spare parts, manufactured according to the strict standards of the Swedish manufacturer. Each ball undergoes rigorous quality control before packaging. Using original parts guarantees perfect compatibility and optimal machine performance. What is the difference between the 3mm ball (no. 130) and the 2mm ball (no. 131)? The 3mm balls (no. 130) and the 2mm balls (no. 131) have different dimensions and are used in different positions of the Scorpion X2 mechanism. Each type is designed for a specific function and they are not interchangeable. It is essential to use the correct size according to the manufacturer's specifications. How do I know the balls need replacing? Signs indicating the need for replacement include: unusual noise during operation, increased vibration, jerky needle movement, or reduced machine performance. On visual inspection, worn balls may show signs of corrosion, deformation, or a matte surface. Regular checking prevents unexpected failures. Can I use 3mm balls from another manufacturer? We do not recommend using balls from other manufacturers. Original InkMachines parts are manufactured to extremely precise tolerances, and using non-original components can affect machine performance and may void the warranty. Generic balls may have slightly different dimensions or material quality, which can cause issues.
