Complete guide: Inkmachines nr. 140 - Grip Lock Spring - 1pcs
The grip lock spring no. 140 is an original Ink Machines replacement part for the grip locking mechanism on the Scorpion X2 tattoo machine. It is the elastic component that keeps the grip firmly fixed during work and also allows quick unlocking when you change the setup. It is designed for artists who use the Scorpion X2 and want to keep the machine in optimal condition or replace a weakened or deformed spring.
How to use
- Turn off and disconnect the machine from power, then remove the cartridge or needle and the mounted grip.
- Wipe and disinfect the locking mechanism area before working on the internal parts.
- Access the grip lock mechanism and identify the worn spring (no. 140).
- Carefully remove the old spring without forcing the surrounding components.
- Install the new spring in the same place, respecting the original position and orientation.
- Reassemble the grip and check the locking: the grip must sit firmly, without play, and unlock easily.
- Take a short test before resuming work to confirm that the fixing is stable.
Tips from us
- Keep 2-3 spare springs in your workshop so you can replace them on the spot when needed.
- When replacing spring no. 140, also check locking piece no. 139 — the two form an integrated system, and if necessary, it's best to replace them together.
- Do not stretch or modify a worn spring: it quickly loses tension and no longer ensures correct fixing. The safe solution is a new original spring.
- Include the locking mechanism in the periodic visual inspection of the machine and watch for signs of weakening: locking only succeeds after several attempts or a weak click.
- If you feel the grip moving during tattooing, stop and replace the spring immediately — micro-movements affect line control. Replacement usually takes a few minutes and requires no special tools.
Warning: Never tattoo with a grip that does not fix firmly: a weakened spring can allow the grip to move during work, compromising control and operating safety. Only work on the mechanism with the machine turned off and disconnected. As with any tattoo machine, protect the machine body and clip cord with a disposable barrier during the session, and during maintenance, clean and disinfect the mechanism area before handling.
Frequently asked questions
What is the use of the grip lock spring no. 140?▾
It provides the elastic force through which the locking mechanism keeps the grip firmly fixed on the Scorpion X2. Essentially, it creates the tension that prevents accidental movement of the grip during tattooing and, at the same time, allows easy unlocking when you want to change the setup.
How do I know if the spring needs replacing?▾
Typical signs are: the grip no longer stays firm and moves easily, locking only succeeds after several attempts, the spring does not return to its original shape after unlocking, or a weak click is heard when locking. If the grip moves during work, replace the spring immediately.
Is it compatible with all Scorpion X2 versions?▾
Yes. According to the manufacturer, spring no. 140 fits all Scorpion X2 versions, regardless of whether the machine is configured for Neo cartridges or standard cartridges — the locking mechanism is common to all variants.
Does it work together with locking piece no. 139?▾
Yes. Spring no. 140 and lock no. 139 form an integrated system: the spring provides the elastic force, and the lock ensures mechanical positioning. When one of them is worn, check the other as well; simultaneous replacement restores the mechanism to optimal function.
Can I stretch the old spring instead of replacing it?▾
It is not recommended. The spring is calibrated to a specific tension, and stretching or modifying it compromises its reliability — it quickly loses tension and no longer fixes the grip correctly. A new original spring is the only safe solution.
Does it require special maintenance or hygiene?▾
It does not need special maintenance beyond periodic visual inspection. Avoid exposure to corrosive substances and keep the machine under appropriate humidity conditions. Include the locking mechanism area in the general cleaning of the machine, and if the part goes through autoclave sterilization, check its condition more often.
Product description
Inkmachines nr. 140 - Grip Lock Spring
Grip lock spring for InkMachines Scorpion X2 tattoo machine, original spare part no. 140, 1 piece. The grip lock spring is the elastic component that provides the necessary retention force for the grip locking mechanism on the Scorpion X2 machine. This precision-calibrated spring ensures optimal tension for firm grip fixation during tattooing while also allowing easy unlocking when a change is needed. Manufactured from superior quality spring steel with specific heat treatment, the grip lock spring maintains constant elastic properties throughout its service life, preventing yielding or tension loss. A weakened or broken spring directly compromises locking mechanism safety, allowing the grip to shift during work. InkMachines calibrated this spring to offer the perfect balance between sufficient retention force for absolute safety and ease of operation for quick changes. The Scorpion X2 is valued by professional artists for the ergonomics and speed with which it allows configuration changes. We recommend replacing the grip lock spring when tension loss is observed, difficulty locking the grip, or when the spring shows visible signs of deformation. Original InkMachines part with guaranteed elastic properties. The perfect balance between retention force and ease of operation is the result of years of InkMachines research and development. This precision in calibration is what differentiates original parts from generic ones. Available on tatuat.ro with fast delivery in Romania and Swedish manufacturer guarantee.
Frequently Asked Questions What function does the grip lock spring no. 140 serve? The grip lock spring provides the elastic force needed by the locking mechanism to firmly retain the grip on the Scorpion X2 machine. It creates the tension that prevents accidental grip displacement during tattooing, ensuring operational stability and safety. It is the component that makes both firm fixation and easy unlocking possible. How do I know the grip lock spring needs replacing? Signs of spring wear include: grip is no longer firmly retained and moves easily, locking requires multiple attempts, spring no longer returns to initial shape after unlocking, or a weak click is heard during locking. If the grip shifts during tattooing, the spring must be replaced immediately. Does the grip lock spring work together with lock no. 139? Yes, grip lock spring no. 140 and lock piece no. 139 form an integrated system. The spring provides elastic force while the lock ensures mechanical positioning. When one component is worn, we recommend checking the other as well. Simultaneous replacement of both parts guarantees optimal operation. How much does the grip lock spring no. 140 cost? InkMachines grip lock spring no. 140 is available at approximately 1 EUR, making it one of the most affordable spare parts. The low cost makes preventive replacement extremely convenient. We recommend purchasing 2-3 spare springs to always have parts available in the studio. Can I stretch the spring instead of replacing it? We do not recommend stretching or modifying a worn spring. The original spring is calibrated to a specific tension and any modification can compromise locking mechanism safety. An artificially stretched spring will quickly lose tension again and will no longer ensure correct fixation. Replacement with a new original spring is the only safe solution. Is the grip lock spring the same for all Scorpion X2 versions? Yes, grip lock spring no. 140 is compatible with all versions of the Scorpion X2 machine, regardless of whether it is configured for Neo cartridges or standard cartridges. The locking mechanism is common to all Scorpion X2 configurations, so the same spring works in any variant. How long does it take to replace the grip lock spring? Replacing the grip lock spring is a quick operation, usually taking between 5 and 15 minutes. The process involves accessing the locking mechanism, removing the worn spring, and fitting the new one. Artists familiar with the machine can perform the replacement even faster. No special tools are required. Does a weak spring affect tattoo quality? Yes, indirectly but significantly. A weak spring allows grip micro-movements that affect the artist's control over the machine. These unwanted movements translate into imprecise lines, inconsistent penetration, and increased hand fatigue for the artist. Maintaining the spring in optimal condition contributes to superior work quality. Does the grip lock spring need special maintenance? The grip lock spring does not require special maintenance beyond periodic visual inspection. Avoid exposure to corrosive substances and store the machine in appropriate humidity conditions. General machine cleaning includes the locking mechanism area. If the spring is exposed to autoclave sterilization, check its condition more frequently. Why buy an original spring and not a cheaper generic one? The original InkMachines spring no. 140 is calibrated to the exact tension needed for correct and safe operation of the Scorpion X2 locking mechanism. Generic springs may have different tension, inferior material, or imprecise dimensions. The price difference is insignificant but the performance and safety difference is substantial.
