Complete guide: Inkmachines nr. 146 -Grip Adapter - 1pcs
Grip adapter no. 146 is the interface piece that allows you to mount grips on the InkMachines Scorpion X2 tattoo machine. Essentially, it makes a firm and properly aligned connection between the machine body and the grip you use, extending the versatility of the equipment. It is an original InkMachines replacement part, sold per piece, useful both as a spare in the studio and for replacing a worn adapter.
How to use
- Turn off and disconnect the Scorpion X2 machine before any work on the grip assembly.
- Carefully disassemble the grip and, if applicable, the old adapter from the machine body.
- Clean the contact surfaces on the machine body to remove any residues that could affect fixation.
- Mount adapter no. 146 onto the machine body, aligning the contact surfaces correctly.
- Tighten the adapter firmly, without excessive force, to avoid damaging the threads or surfaces.
- Attach the desired grip onto the adapter and check that there is no play or vibration in the assembly.
- Apply a protective barrier (film) over the machine-grip assembly before the session and verify the cartridge alignment.
- Perform a short test before starting work on skin to confirm everything is stable.
Tips from us
- Keep a spare adapter in the studio, so you don't get stuck during a session if the one on the machine wears out.
- Do not overtighten during assembly — a firm fit is sufficient; forcing can damage precision surfaces.
- Clean the contact surfaces regularly and inspect them periodically for signs of wear or play.
- Choose original InkMachines parts for guaranteed fit with the Scorpion X2; generic adapters can introduce play or vibrations.
- If you notice increased vibrations in the grip area or difficult assembly/disassembly, first check the adapter — often it is the cause.
Warning: Only work on the assembly with the machine turned off and disconnected. The adapter is part of the machine's configuration, so always use a protective barrier (film) over the assembly during the session and clean/disinfect surfaces according to the studio's hygiene protocol. This part does not replace sterile disposable consumables (cartridges, disposable grips where applicable). A loose or worn adapter compromises machine stability — replace it when signs of wear appear.
Frequently asked questions
Which machine is adapter no. 146 compatible with?▾
It is designed for the InkMachines Scorpion X2 tattoo machine, as an original replacement part. Being a part with geometry specific to this machine, we recommend using it on the Scorpion X2, not as a universal replacement on other models.
Can I use a grip adapter from another manufacturer?▾
We do not recommend it. Adapter no. 146 has dimensions and geometry designed for the Scorpion X2, and generic parts do not guarantee an exact fit and can introduce play, vibrations, or even machine wear. For compatibility and stability, go with the original InkMachines part.
How do I clean and maintain the adapter?▾
Clean the contact surfaces regularly to prevent accumulation of residues that affect fixation, and inspect the part periodically for wear or corrosion. During work, use a protective barrier over the assembly, and disinfect according to your hygiene protocol. Being a reusable metal part, handle it with care during assembly and disassembly.
How do I know when it needs to be replaced?▾
Typical signs are: play between the adapter and the grip or machine body, increased vibrations in the grip area, visibly worn contact surfaces, and difficulty in assembly or disassembly. When these signs appear, replacement restores stability and comfort in use.
Does it work with both Neo and standard cartridges?▾
Yes. The Scorpion X2 machine can work with both Neo cartridges (magnetic system, contactless) and standard cartridges, and the grip adapter is designed to support the machine's versatility in these configurations.
Is the adapter included when I buy the Scorpion X2 machine?▾
Yes, the machine comes standard with the corresponding adapter. Part no. 146 is sold separately, per piece, as a spare or for replacing a worn or damaged adapter — useful to have in the studio for quick interventions.
Product description
Inkmachines nr. 110 - Conversion Kit Fits all Scorpion metal grips so that regular cartridges will fit the grip. Note that the No. 148 - Give adapter also must be mounted in the machine when using regular cartridges. The screw is included Tool kit No. 90 is needed
Grip adapter for InkMachines Scorpion X2 tattoo machine, original spare part no. 146, 1 piece. The grip adapter is an essential component that allows the use of different grip types with the Scorpion X2 machine, extending equipment versatility. This interface piece ensures perfect compatibility between the machine body and available grips, maintaining correct alignment and firm fixation during tattoo sessions. Manufactured from high-quality metal alloy with precision finish, the grip adapter is designed to withstand repetitive mechanical stress without deformation or premature wear. Contact surfaces are machined to tight tolerances to eliminate any unwanted play or vibration. The InkMachines Scorpion X2 offers tattoo artists remarkable flexibility, allowing both Neo cartridges with magnetic non-contact system and standard cartridges. The grip adapter complements this versatility, making it possible to customize machine configuration according to each artist's preferences and specific session requirements. Adapter replacement is necessary when wear on contact surfaces, play between adapter and grip, or physical deformation is observed. Original InkMachines part with dimensions and finish guaranteed by the Swedish manufacturer. Versatility is one of the greatest advantages of the Scorpion X2 machine, and the grip adapter extends this flexibility. The original InkMachines part guarantees perfect compatibility with all grips in the manufacturer's range. Available on tatuat.ro with fast delivery throughout Romania.
Frequently Asked Questions Which grips are compatible with adapter no. 146? Grip adapter no. 146 is designed to ensure compatibility with original InkMachines grips intended for the Scorpion X2 machine, both for Neo and standard cartridge configurations. It allows use of the entire InkMachines grip range, offering the artist maximum flexibility in equipment choice. Why do I need a grip adapter? The grip adapter enables transition between different grip types and Scorpion X2 machine configurations. Without the adapter, grips could not be correctly mounted on the machine, compromising alignment, stability, and safety. It is an essential interface component that makes machine versatility possible. How much does grip adapter no. 146 cost? InkMachines grip adapter no. 146 is available at approximately 7 EUR. Being an essential interface component with precision finish, the price reflects material and manufacturing quality. The investment ensures perfect compatibility and long-term reliable operation. How do I know the grip adapter needs replacing? Signs of wear include: play between adapter and grip or machine body, increased vibrations in the grip area, visibly worn or deteriorated contact surfaces, and difficulty mounting or removing the grip. A worn adapter compromises machine stability and comfort in use. Is the grip adapter included when purchasing the Scorpion X2? Yes, the Scorpion X2 machine comes standard equipped with the corresponding grip adapter. Part no. 146 is available separately as a spare part for replacing a worn or damaged adapter. We recommend keeping a spare adapter in the studio for quick interventions when needed. Can I use grip adapters from other manufacturers? We do not recommend using adapters from other manufacturers. Adapter no. 146 has dimensions and geometry specific to the Scorpion X2 machine. Generic adapters do not guarantee exact fit and can cause play, vibrations, or machine damage. Safety and performance depend on using original parts. Does the grip adapter require maintenance? The grip adapter benefits from regular cleaning of contact surfaces to prevent residue buildup that can affect fixation. Periodically inspect for signs of wear or corrosion. Light lubrication of contact surfaces can facilitate grip mounting and removal and prevent premature wear. Is the grip adapter the same for Neo and standard cartridges? Grip adapter no. 146 is designed to function in both Scorpion X2 machine configurations. Versatility is a key advantage of the machine, and interface components are designed to support both cartridge systems without needing to change the adapter. How durable is the grip adapter? The InkMachines grip adapter is manufactured from robust metal alloy, designed for intensive professional use. Under normal usage conditions with adequate maintenance, the adapter can last for years. Durability depends on the frequency of grip changes and care in handling. What is the difference between the grip adapter and the give adapter? Grip adapter no. 146 provides the mechanical interface between machine and grip, while give adapter no. 148 allows adjustment of the give (elastic recoil) of the drive mechanism. They are components with completely different functions and are not interchangeable. Both are important for optimal machine configuration.
