Ce sunt clipcord binding posts și la ce folosesc?

Sunt bornele metalice de pe corpul mașinii unde se conectează cablul clipcord. Fac legătura electrică între sursa de alimentare și motor, așa că un contact bun aici influențează direct constanța vitezei și fiabilitatea mașinii.

Cum îmi dau seama că bornele trebuie înlocuite?

Semnele tipice: suprafața de contact oxidată (verzuie sau neagră), clipcord-ul nu mai face contact ferm nici la strângere completă, bornele se încălzesc în timpul lucrului, sau motorul are fluctuații ori opriri intermitente care nu vin de la sursă sau de la cablu. Verifică întâi cu un clipcord bun; dacă problema rămâne, bornele sunt cauza.

Cu ce mașini sunt compatibile?

Piesa este listată ca piesă de schimb pentru mașini InkMachines — Dragonfly, Stingray și Scorpion. Fiind piesă originală a producătorului, asigură potrivirea mecanică și electrică cu aceste modele.

Funcționează cu orice cablu clipcord?

Bornele sunt gândite pentru conectori clipcord de tip standard, iar majoritatea cablurilor clipcord profesionale se potrivesc. Conectorii de dimensiuni atipice sau de calitate slabă pot face un contact imperfect; pentru un contact electric optim, folosește un clipcord profesional în stare bună.

Cum le întrețin ca să reziste?

Curăță suprafețele de contact cu alcool izopropilic după sesiuni, verifică-le lunar pentru oxidare, strânge ferm dar fără exces (strângerea excesivă poate deforma bornele), nu lăsa clipcord-ul conectat între utilizări și depozitează mașina într-un mediu uscat.

Câte bucăți primesc la comandă?

Livrarea este de 1 bucată (piesa nr. 47).

Inkmachines nr. 47 - Clipcord binding posts - 1pcs

Ink Machines

Cod produs: 375587

61,70 Lei

Fast delivery

Delivery 24-48h

14-day returnsWarrantyDelivery 24-48h

💵 Cash on delivery🔒 Secure order

Specifications

Brand: Ink Machines
Packaging: 1 piece
Material: Plated conductor
Compatibility: InkMachines Dragonfly
Resistance: Oxidation, corrosion
Usage: Clipcord connection
Content: 1 piece

Ghiduri utile:Piese de schimb Ink Machines — Dragonfly, Stingray, Scorpion, Cobra: ghid InkMachines — mașini suedeze și piese de schimb (Dragonfly, Scorpion, Stingray, Cobra)Întreținerea mașinii de tatuat: piesele de schimb esențiale

Guide & full description

Complete guide: Inkmachines nr. 47 - Clipcord binding posts - 1pcs

Part no. 47 is the set of connection terminals (clipcord binding posts) for the clipcord cable — the electrical component through which current passes from the power supply to the motor of an InkMachines rotary machine. When the existing terminals are worn or oxidized, contact weakens and the motor may run irregularly; this original part replaces them and restores a firm electrical connection. It is intended for artists who work with InkMachines machines and want a manufacturer-brand replacement part. Delivery is 1 piece.

How to use

Turn off and disconnect the machine from the power supply and remove the clipcord before any intervention — it is an electrical component.
Remove the old terminals by unscrewing the screws that secure the binding post, according to your machine's construction.
Place the new terminals (part no. 47) in their housing, with the plastic insulation sleeve correctly positioned.
Tighten the screws only enough to hold the position — firmly but without forcing (see the 'Attention' section).
Reconnect the clipcord and check that it makes firm contact, without play.
Start at a low voltage and monitor that the motor runs steadily, without speed fluctuations and without the terminals heating up.

Tips from us

Clean the contact surfaces with isopropyl alcohol after each session to remove residues and prevent oxidation.
Do not leave the clipcord connected when the machine is not in use — reduces the risk of galvanic corrosion.
Check the terminals monthly: a greenish or black color on the contact surface indicates oxidation.
When you suspect a power issue, first test with a clipcord you know is good; if the problem persists, the terminals are the cause.
Keep a spare part on hand so you don't interrupt an appointment due to a worn terminal.

Warning: Do not overtighten the screws that secure the binding post. Excessive tightening can damage the plastic insulation sleeve and cause a short circuit, and the screw holding the motor cable end can be damaged — tighten only enough to keep the part in place. As an electrical component, always work with the machine disconnected from the power supply.

Frequently asked questions

What are clipcord binding posts and what are they used for?▾

They are the metal terminals on the machine body where the clipcord cable connects. They make the electrical connection between the power supply and the motor, so good contact here directly influences speed consistency and machine reliability.

How do I know when the terminals need to be replaced?▾

Typical signs: oxidized contact surface (greenish or black), the clipcord no longer makes firm contact even when fully tightened, the terminals heat up during work, or the motor has fluctuations or intermittent stops that don't come from the power supply or the cable. First check with a good clipcord; if the problem remains, the terminals are the cause.

Which machines are they compatible with?▾

The part is listed as a replacement part for InkMachines machines — Dragonfly, Stingray and Scorpion. Being an original manufacturer part, it ensures mechanical and electrical fit with these models.

Does it work with any clipcord cable?▾

The terminals are designed for standard type clipcord connectors, and most professional clipcord cables fit. Atypical size or poor quality connectors may make imperfect contact; for optimal electrical contact, use a professional clipcord in good condition.

How do I maintain them to last?▾

Clean the contact surfaces with isopropyl alcohol after sessions, check them monthly for oxidation, tighten firmly but without excess (excessive tightening can deform the terminals), do not leave the clipcord connected between uses, and store the machine in a dry environment.

How many pieces do I receive per order?▾

Delivery is 1 piece (part no. 47).

Product description

Inkmachines nr. 47 - Clipcord binding posts Hint! Do not over tighten the screws that holds the Bindingpost positive. This can damage the plastic insulation sleeve and may cause short circuit. Just tighten enough to hold it in place. The screw that holds the end of the motor cord likewise or the cord can be damaged. The InkMachines Clipcord Binding Posts (part no. 47) are the original connection terminals for the clipcord cable of InkMachines Dragonfly rotary machines, the essential electrical components that ensure reliable current transfer from the power supply to the machine motor. These precision binding posts are specifically designed for the InkMachines electrical architecture, guaranteeing perfect electrical contact with the clipcord connector and minimal resistance to current flow — a critical aspect for consistent motor performance and operating speed consistency. Manufactured from high-quality conductive material with oxidation and corrosion-resistant plating, the binding posts maintain optimal electrical conductivity across thousands of connection-disconnection cycles. The mechanical design includes a clamping system that ensures firm clipcord contact, preventing accidental disconnections and current fluctuations that can cause motor speed variations during sessions. Worn or oxidized terminals can generate additional electrical resistance, resulting in power losses, excessive connection heating, irregular motor operation, or even intermittent power interruptions. Signs of wear include: discolored or oxidized contact surface, weak clipcord contact even at maximum tightening, terminal heating during operation, or motor speed fluctuations not caused by the power supply. The original InkMachines part (no. 47) guarantees perfect electrical and mechanical compatibility with the Dragonfly machine. Frequently Asked Questions